* initial files to get stuff working
* Keymap by Ladniy
* Format update to new standards
* keymap update
* header
* Fixed transform, removed left and right .conf files
* Apply suggestions from code review
Formatting
Co-authored-by: Nick Winans <nick@winans.codes>
Co-authored-by: Nick Winans <nick@winans.codes>
* initial commit
* initial commit
* Encode, OLED, and RGB Nice Nano support added as well as refining default keymap.
* tweaking keymap
* Prepared murphpad for PR. Includes adding support for second encoder, OLED, and underglow RGB
* Enabled OLED by default.
* removed naked60 config files
* Per PR feedback from ZMK maintainers, added hardware metadata file and renamed Pro Micro pins.
* removed tabs from keymap and replaced with normal spaces
* Update app/boards/shields/murphpad/murphpad.keymap
Co-authored-by: Nick Winans <nick@winans.codes>
* Update app/boards/shields/murphpad/murphpad.zmk.yml
Co-authored-by: Nick Winans <nick@winans.codes>
* Update app/boards/shields/murphpad/murphpad.zmk.yml
Co-authored-by: Nick Winans <nick@winans.codes>
Co-authored-by: honorless <86894501+lesshonor@users.noreply.github.com>
Co-authored-by: Nick Winans <nick@winans.codes>
* Initial commit of boardsource5x12
* Added copyright/license header
* Update app/boards/shields/boardsource5x12/Kconfig.defconfig
Co-authored-by: Pete Johanson <peter@peterjohanson.com>
* Update app/boards/shields/boardsource5x12/boardsource5x12.overlay
Co-authored-by: Pete Johanson <peter@peterjohanson.com>
* Update app/boards/shields/boardsource5x12/Kconfig.shield
Co-authored-by: Pete Johanson <peter@peterjohanson.com>
* Update app/boards/shields/boardsource5x12/boardsource5x12.keymap
Co-authored-by: Pete Johanson <peter@peterjohanson.com>
* Swapping keymap for what used in Naked60 as it's another 60 key board, so it keeps it consistent.
* Update app/boards/shields/boardsource5x12/boardsource5x12.keymap
Co-authored-by: Nick Winans <nick@winans.codes>
* renamed layers in boardsource5-12
Co-authored-by: Pete Johanson <peter@peterjohanson.com>
Co-authored-by: Nick Winans <nick@winans.codes>
* Add support for keeb.io fourier
* Update app/boards/shields/fourier/fourier_right.overlay
Co-authored-by: Nick Winans <nick@winans.codes>
* Update app/boards/shields/fourier/fourier_left.overlay
Co-authored-by: Nick Winans <nick@winans.codes>
* Convert spaces to tabs in .dtsi
Co-authored-by: Nick Winans <nick@winans.codes>
* initial commit
* initial commit
* Encode, OLED, and RGB Nice Nano support added as well as refining default keymap.
* tweaking keymap
* Prepared murphpad for PR. Includes adding support for second encoder, OLED, and underglow RGB
* Enabled OLED by default.
* Initial commit with settings updated to match schematic.
* Removing test directories.
* removed naked60 config files
* Fixed dogbone definitions to be full working for murphpad.
* Preparing S40NC for PR
* Removed the murphpad test files that were not supposed to be a part of this PR.
* Changing licensing to be from The ZMK Contributors.
* Changed the licensing in the keymap file to be from The ZMK Contributors
* Update s40nc.keymap
This is a generalization of the existing concept of tri-layer support
that's already well known. Essentially, a conditional-layer
configuration activates a particular layer (the then-layer) when one or
more other layers (the if-layers) are activated.
This is commonly used on ortho keyboards to activate a third "adjust"
layer while the primary two layers ("lower" and "raise") are active.
* Add optional `hold-trigger-key-positions` hold-tap configuration
* Leverage configuration for decision making around when to trigger
hold decision in hold-taps.
* Add docs for new configuration.
* Tests for the new config/decision logic.
Switched the GPIO matrix driver to debouncing using a simple integrator
algorithm. Whenever a key is pressed, we now scan at a rate controlled
by debounce-scan-period-ms (default 1 ms) until all keys are released,
then return to either waiting for an interrupt or polling more slowly.
The timers for key press and release can now be controlled separately,
so debounce-period is deprecated in favor of debounce-press-ms and
debounce-release-ms. Global Kconfig options
ZMK_KSCAN_DEBOUNCE_PRESS_MS and ZMK_KSCAN_DEBOUNCE_RELEASE_MS are also
added to make these easier to set.
Added documentation for debouncing options.
* Some runtimes (e.g. podman), require explicit registries in image URLs
or will prompt for the user to select one, which breaks things like
VSCode remote container rebuilds.
* Make the synthetic "base name" property double underscore prefixed,
since internal, and to avoid future conflicts w/ YAML format add'ns.
* Switch to PS hash dictionaries for our metadata collections for saner
data inspection/use.
* Use unified config template repo that uses an external
build matrix YAML file.
* Proper handling for onboard keyboards, including splits, and
supports for appending the right build matrix once selected.
Kiessling