* initial commit
* initial commit
* Encode, OLED, and RGB Nice Nano support added as well as refining default keymap.
* tweaking keymap
* Prepared murphpad for PR. Includes adding support for second encoder, OLED, and underglow RGB
* Enabled OLED by default.
* Initial commit with settings updated to match schematic.
* Removing test directories.
* removed naked60 config files
* Fixed dogbone definitions to be full working for murphpad.
* Preparing S40NC for PR
* Removed the murphpad test files that were not supposed to be a part of this PR.
* Changing licensing to be from The ZMK Contributors.
* Changed the licensing in the keymap file to be from The ZMK Contributors
* Update s40nc.keymap
My Planck rev 6.1 would not register any keys without "col2row".
I also had to apply a matrix_transform in order to move them to the
correct position. Peeking into #228 helped for finding this.
I also add transforms for the 2u spacebar layouts.
This commits adds a delay of 20ms on initializing the external
power control driver. Previously, OLED's i2c driver is failing to
initialize the display. This commit fixes that issue.
Signed-off-by: Anthony Amanse <ghieamanse@gmail.com>
This commit fixes the pin definition for BlueMicro840. Based on the
schematics, the blue led is at pin 1.10.
Signed-off-by: Anthony Amanse <ghieamanse@gmail.com>
Aligns *.h and *.c to underscore naming convention.
These were kept (with warnings) for backwards compatibility with external boards/shields:
- kscan-mock.h
- matrix-transform.h
They should be removed in the future.
PR: #523
This PR adds support to control the external power output from controllers like nice!nano, nRFMicro etc
I have implemented based on my understanding of Pete suggestion on this feature.
Testing done:
Tested by enabling and disabling the ext_power from application and verified
Verified the application does not crash with boards that does not have ext_power support
Note:
I did not test this in nice!nano since I don't have the boards. Will get help from others once the behavior PR is up
Next Steps:
Create a behavior PR to control enable/disable ext_power
- Add ZMK_KSCAN_MATRIX_POLLING config flag to Kconfig
- Update matrix driver code to use the above flag to conditionally add the handling code for polling operations.
zhiayang