Added Makerdiary M.2 module

app/boards/arm/nrf52840_m2/CMakeLists.txt

@@ -0,0 +1,13 @@
+#
+# Copyright (c) 2020 The ZMK Contributors
+# SPDX-License-Identifier: MIT
+#
+
+set_property(GLOBAL APPEND PROPERTY extra_post_build_commands
+  COMMAND ${PYTHON_EXECUTABLE} ${ZEPHYR_BASE}/../tools/uf2/utils/uf2conv.py
+  -c
+  -b 0x26000
+  -f 0xADA52840
+  -o ${PROJECT_BINARY_DIR}/${CONFIG_KERNEL_BIN_NAME}.uf2
+  ${PROJECT_BINARY_DIR}/${CONFIG_KERNEL_BIN_NAME}.bin
+)

app/boards/arm/nrf52840_m2/Kconfig

@@ -0,0 +1,10 @@
+#
+# Copyright (c) 2020 The ZMK Contributors
+# SPDX-License-Identifier: MIT
+#
+
+config BOARD_ENABLE_DCDC
+	bool "Enable DCDC mode"
+	select SOC_DCDC_NRF52X
+	default y
+	depends on BOARD_NRF52840_M2

app/boards/arm/nrf52840_m2/Kconfig.board

@@ -0,0 +1,10 @@
+# Maker Diary nrf52840 M.2 board configuration
+#
+# Copyright (c) 2020 The ZMK Contributors
+# SPDX-License-Identifier: MIT
+#
+
+config BOARD_NRF52840_M2
+	bool "nrf52480_m2"
+	depends on SOC_NRF52840_QIAA
+

app/boards/arm/nrf52840_m2/Kconfig.defconfig

@@ -0,0 +1,30 @@
+#
+# Copyright (c) 2020 The ZMK Contributors
+# SPDX-License-Identifier: MIT
+#
+
+if BOARD_NRF52840_M2
+
+config BOARD
+	default "nrf52480_m2"
+
+if USB
+
+config USB_NRFX
+	default y
+
+config USB_DEVICE_STACK
+	default y
+
+endif # USB
+
+config BT_CTLR
+	default BT
+
+config ZMK_BLE
+	default y
+
+config ZMK_USB
+	default y
+
+endif # BOARD_NRF52840_M2

app/boards/arm/nrf52840_m2/board.cmake

@@ -0,0 +1,9 @@
+#
+# Copyright (c) 2020 The ZMK Contributors
+# SPDX-License-Identifier: MIT
+#
+
+board_runner_args(nrfjprog "--nrf-family=NRF52" "--softreset")
+
+include(${ZEPHYR_BASE}/boards/common/blackmagicprobe.board.cmake)
+include(${ZEPHYR_BASE}/boards/common/nrfjprog.board.cmake)

app/boards/arm/nrf52840_m2/nrf52840_m2.dts

@@ -0,0 +1,97 @@
+/*
+ * Copyright (c) 2020 The ZMK Contributors
+ * SPDX-License-Identifier: MIT
+ */
+
+/dts-v1/;
+#include <nordic/nrf52840_qiaa.dtsi>
+
+/ {
+	model = "Makerdiary nRF52840 M.2 module";
+	compatible = "makerdiary,nrf52840_m2";
+
+	chosen {
+		zephyr,code-partition = &code_partition;
+		//zephyr,console = &uart0;
+		//zephyr,bt-mon-uart = &uart0;
+		//zephyr,bt-c2h-uart = &uart0;
+		zephyr,sram = &sram0;
+		zephyr,flash = &flash0;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		red_led: led_0 {
+			gpios = <&gpio0 30 GPIO_ACTIVE_HIGH>;
+			label = "Red LED";
+		};
+		green_led: led_1 {
+			gpios = <&gpio0 29 GPIO_ACTIVE_HIGH>;
+			label = "Green LED";
+		};
+		blue_led: led_2 {
+			gpios = <&gpio0 31 GPIO_ACTIVE_HIGH>;
+			label = "Blue LED";
+		};
+	};
+
+};
+
+&gpio0 {
+	status = "okay";
+};
+
+&gpio1 {
+	status = "okay";
+};
+
+&uart0 {
+	compatible = "nordic,nrf-uart";
+	status = "okay";
+	current-speed = <115200>;
+	tx-pin = <16>;
+	rx-pin = <15>;
+	rts-pin = <14>;
+	cts-pin = <13>;
+};
+
+&usbd {
+	compatible = "nordic,nrf-usbd";
+	status = "okay";
+};
+
+
+&flash0 {
+	/*
+	 * For more information, see:
+	 * http://docs.zephyrproject.org/latest/devices/dts/flash_partitions.html
+	 */
+	partitions {
+		compatible = "fixed-partitions";
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		boot_partition: partition@0 {
+			label = "adafruit_boot";
+			reg = <0x000000000 0x0000C000>;
+		};
+		code_partition: partition@26000 {
+			label = "code_partition";
+			reg = <0x00026000 0x000d2000>;
+		};
+
+		/*
+		 * The flash starting at 0x000f8000 and ending at
+		 * 0x000fffff is reserved for use by the application.
+		 */
+
+		/*
+		 * Storage partition will be used by FCB/LittleFS/NVS
+		 * if enabled.
+		 */
+		storage_partition: partition@f8000 {
+			label = "storage";
+			reg = <0x000f8000 0x00008000>;
+		};
+	};
+};

app/boards/arm/nrf52840_m2/nrf52840_m2.yaml

@@ -0,0 +1,15 @@
+identifier: nrf52840_m2
+name: Makerdiary nRF52840 M.2 module
+type: mcu
+arch: arm
+toolchain:
+  - zephyr
+  - gnuarmemb
+  - xtools
+supported:
+  - adc
+  - usb_device
+  - ble
+  - ieee802154
+  - pwm
+  - watchdog

app/boards/arm/nrf52840_m2/nrf52840_m2_defconfig

@@ -0,0 +1,23 @@
+#
+# Copyright (c) 2020 The ZMK Contributors
+# SPDX-License-Identifier: MIT
+#
+
+CONFIG_SOC_SERIES_NRF52X=y
+CONFIG_SOC_NRF52840_QIAA=y
+CONFIG_BOARD_NRF52840_M2=y
+
+# Enable MPU
+CONFIG_ARM_MPU=y
+
+# enable GPIO
+CONFIG_GPIO=y
+
+CONFIG_USE_DT_CODE_PARTITION=y
+
+CONFIG_MPU_ALLOW_FLASH_WRITE=y
+CONFIG_NVS=y
+CONFIG_SETTINGS_NVS=y
+CONFIG_FLASH=y
+CONFIG_FLASH_PAGE_LAYOUT=y
+CONFIG_FLASH_MAP=y