docs(codes): Refer to LSHIFT instead of LSHFT

`LSHIFT` is slightly more intuitive and should result in fewer user
errors.

docs/docs/behaviors/hold-tap.md

@@ -85,7 +85,7 @@ This example configures a hold-tap that works well for homerow mods:
 
 		default_layer {
 			bindings = <
-	            &hm LCTRL A &hm LGUI S &hm LALT D &hm LSHFT F
+	            &hm LCTRL A &hm LGUI S &hm LALT D &hm LSHIFT F
 			>;
 		};
 	};

docs/docs/behaviors/mod-tap.md

@@ -19,13 +19,13 @@ The Mod-Tap behavior either acts as a held modifier, or as a tapped keycode.
 ### Behavior Binding
 
 - Reference: `&mt`
-- Parameter #1: The keycode to be sent when activating as a modifier, e.g. `LSHFT`
+- Parameter #1: The keycode to be sent when activating as a modifier, e.g. `LSHIFT`
 - Parameter #2: The keycode to sent when used as a tap, e.g. `A`, `B`.
 
 Example:
 
 ```
-&mt LSHFT A
+&mt LSHIFT A
 ```
 
 ### Configuration

docs/docs/behaviors/sticky-key.md

@@ -12,12 +12,12 @@ By default, sticky keys stay pressed for a second if you don't press any other k
 ### Behavior Binding
 
 - Reference: `&sk`
-- Parameter #1: The keycode , e.g. `LSHFT`
+- Parameter #1: The keycode , e.g. `LSHIFT`
 
 Example:
 
 ```
-&sk LSHFT
+&sk LSHIFT
 ```
 
 You can use any keycode that works for `&kp` as parameter to `&sk`:
@@ -44,7 +44,7 @@ You can configure a different `release-after-ms` in your keymap:
 
 ### Advanced usage
 
-Sticky keys can be combined; if you tap `&sk LCTRL` and then `&sk LSHFT` and then `&kp A`, the output will be ctrl+shift+a.
+Sticky keys can be combined; if you tap `&sk LCTRL` and then `&sk LSHIFT` and then `&kp A`, the output will be ctrl+shift+a.
 
 ### Comparison to QMK
 

docs/docs/behaviors/sticky-layer.md

@@ -38,7 +38,7 @@ You can configure a different `release-after-ms` in your keymap:
 
 ### Advanced usage
 
-Sticky layers behave slightly different from sticky keys. They are configured to `quick-release`. This means that the layer is released immediately when another key is pressed. "Normal" sticky keys are not `quick-release`; they are released when the next key is released. This makes it possible to combine sticky layers and sticky keys as such: tap `&sl 1`, tap `&sk LSHFT` on layer 1, tap `&kp A` on base layer to output shift+A.
+Sticky layers behave slightly different from sticky keys. They are configured to `quick-release`. This means that the layer is released immediately when another key is pressed. "Normal" sticky keys are not `quick-release`; they are released when the next key is released. This makes it possible to combine sticky layers and sticky keys as such: tap `&sl 1`, tap `&sk LSHIFT` on layer 1, tap `&kp A` on base layer to output shift+A.
 
 ### Comparison to QMK
 

docs/docs/features/keymaps.md

@@ -70,7 +70,7 @@ In this case, the `A` is actually a define for the raw HID keycode, to make keym
 For example of a binding that uses two parameters, you can see how "mod-tap" (`mt`) is bound:
 
 ```
-&mt LSHFT D
+&mt LSHIFT D
 ```
 
 Here, the first parameter is the set of modifiers that should be used for the "hold" behavior, and the second
@@ -94,7 +94,7 @@ The top two lines of most keymaps should include:
 
 The first defines the nodes for all the available behaviors in ZMK, which will be referenced in the behavior bindings. This is how bindings like `&kp` can reference the key press behavior defined with an anchor name of `kp`.
 
-The second include brings in the defines for all the keycodes (e.g. `A`, `N1`, `C_PLAY`) and the modifiers (e.g. `LSHFT`) used for various behavior bindings.
+The second include brings in the defines for all the keycodes (e.g. `A`, `N1`, `C_PLAY`) and the modifiers (e.g. `LSHIFT`) used for various behavior bindings.
 
 ### Root devicetree Node
 

docs/docs/keymap-example-file.md

@@ -15,7 +15,7 @@
 			bindings = <
     &kp ESC    &kp Q    &kp W    &kp E     &kp R     &kp T                                                 &kp Y     &kp U     &kp I     &kp O     &kp P    &kp BSLH
     &kp TAB    &kp A    &kp S    &kp D     &kp F     &kp G                                                 &kp H     &kp J     &kp K     &kp L     &kp SEMI &kp QUOTE
-    &kp LSHFT &kp Z     &kp X    &kp C     &kp V     &kp B      &kp LC(A) &kp LC(C)    &kp LC(V) &kp LC(X) &kp N     &kp M     &kp COMMA &kp DOT   &kp FSLH &kp RCTRL
+    &kp LSHIFT &kp Z    &kp X    &kp C     &kp V     &kp B      &kp LC(A) &kp LC(C)    &kp LC(V) &kp LC(X) &kp N     &kp M     &kp COMMA &kp DOT   &kp FSLH &kp RCTRL
                                  &kp LGUI  &kp DEL   &kp RET    &kp SPACE &kp ESC      &kp RET   &kp SPACE &kp TAB   &kp BSPC  &kp RALT
 			>;
 

docs/docs/keymap-example.md

@@ -11,7 +11,7 @@
 			bindings = <
     &kp ESC    &kp Q    &kp W    &kp E     &kp R     &kp T                                                 &kp Y     &kp U     &kp I     &kp O     &kp P    &kp BSLH
     &kp TAB    &kp A    &kp S    &kp D     &kp F     &kp G                                                 &kp H     &kp J     &kp K     &kp L     &kp SEMI &kp QUOTE
-    &kp LSHFT &kp Z     &kp X    &kp C     &kp V     &kp B      &kp LC(A) &kp LC(C)    &kp LC(V) &kp LC(X) &kp N     &kp M     &kp COMMA &kp DOT   &kp FSLH &kp RCTRL
+    &kp LSHIFT &kp Z    &kp X    &kp C     &kp V     &kp B      &kp LC(A) &kp LC(C)    &kp LC(V) &kp LC(X) &kp N     &kp M     &kp COMMA &kp DOT   &kp FSLH &kp RCTRL
                                  &kp LGUI  &kp DEL   &kp RET    &kp SPACE &kp ESC      &kp RET   &kp SPACE &kp TAB   &kp BSPC  &kp RALT
 			>;