Fixed nits and suggestions

ctru-rs/examples/camera-image.rs

@@ -83,7 +83,7 @@ fn main() {
                 .take_picture(&mut buf, WAIT_TIMEOUT)
                 .expect("Failed to take picture");
 
-            let image_size = camera.final_view_size();
+            let (width, height) = camera.final_view_size();
 
             // Play the normal shutter sound.
             cam.play_shutter_sound(ShutterSound::Normal)
@@ -96,16 +96,16 @@ fn main() {
                 rotate_image_to_screen(
                     &buf,
                     left_side.raw_framebuffer().ptr,
-                    image_size.0 as usize,
+                    width as usize,
-                    image_size.1 as usize,
+                    height as usize,
                 );
 
                 // Rotate the right image and correctly display it on the screen.
                 rotate_image_to_screen(
                     &buf[len / 2..],
                     right_side.raw_framebuffer().ptr,
-                    image_size.0 as usize,
+                    width as usize,
-                    image_size.1 as usize,
+                    height as usize,
                 );
             }
 

ctru-rs/examples/movement.rs

@@ -19,8 +19,10 @@ fn main() {
     // Activate the accelerometer and the gyroscope.
     // Because of the complex nature of the movement sensors, they aren't activated by default with the `Hid` service.
     // However, they can simply be turned on and off whenever necessary.
-    hid.set_accelerometer(true);
+    hid.set_accelerometer(true)
-    hid.set_gyroscope(true);
+        .expect("Couldn't activate accelerometer");
+    hid.set_gyroscope(true)
+        .expect("Couldn't activate gyroscope");
 
     while apt.main_loop() {
         // Scan all the controller inputs.
@@ -34,13 +36,17 @@ fn main() {
         // Be careful: reading without activating the sensors (as done before this loop) will result in a panic.
         println!(
             "\x1b[3;0HAcceleration: {:?}              ",
+            Into::<(i16, i16, i16)>::into(
                 hid.accelerometer_vector()
                     .expect("could not retrieve acceleration vector")
+            )
         );
         println!(
             "\x1b[4;0HGyroscope angular rate: {:?}              ",
+            Into::<(i16, i16, i16)>::into(
                 hid.gyroscope_rate()
                     .expect("could not retrieve angular rate")
+            )
         );
 
         gfx.wait_for_vblank();

ctru-rs/src/console.rs

@@ -209,7 +209,7 @@ impl<'screen> Console<'screen> {
     ///
     /// # Example
     ///
-    /// ```no_run
+    /// ```
     /// # use std::error::Error;
     /// # fn main() -> Result<(), Box<dyn Error>> {
     /// #
@@ -264,7 +264,7 @@ impl<'screen> Console<'screen> {
     ///
     /// # Example
     ///
-    /// ```no_run
+    /// ```
     /// # use std::error::Error;
     /// # fn main() -> Result<(), Box<dyn Error>> {
     /// #
@@ -288,14 +288,14 @@ impl<'screen> Console<'screen> {
     pub fn reset_window(&mut self) {
         let width = self.max_width();
 
-        unsafe { consoleSetWindow(self.context.as_mut(), 0, 0, width.into(), 30) };
+        self.set_window(0, 0, width, 30).unwrap();
     }
 
     /// Returns this [`Console`]'s maximum character width depending on the screen used.
     ///
     /// # Example
     ///
-    /// ```no_run
+    /// ```
     /// # use std::error::Error;
     /// # fn main() -> Result<(), Box<dyn Error>> {
     /// #

ctru-rs/src/lib.rs

@@ -76,7 +76,6 @@ pub fn use_panic_handler() {
 /// When `test` is enabled, this function will be ignored.
 #[cfg(not(test))]
 fn panic_hook_setup() {
-    use crate::services::hid::KeyPad;
     use std::panic::PanicInfo;
 
     let main_thread = std::thread::current().id();
@@ -88,27 +87,9 @@ fn panic_hook_setup() {
 
         // Only for panics in the main thread
         if main_thread == std::thread::current().id() && console::Console::exists() {
-            println!("\nPress SELECT to exit the software");
+            println!("\nThe software will exit in 5 seconds");
 
-            // Due to how the Hid service operates, we can't safely use 2 handles to it at the same time.
+            std::thread::sleep(std::time::Duration::from_secs(5));
-            // Furthermore, the panic hook runs before the panic cleanup is done, which means that any other handles
-            // to the service will still be alive during this process.
-            // Regardless, we can "unsafely" spin up a new instance, since the module won't be used any further from the main process,
-            // which is going to get cleaned up right after this loop.
-            unsafe {
-                let _ = ctru_sys::hidInit();
-
-                loop {
-                    ctru_sys::hidScanInput();
-                    let keys = ctru_sys::hidKeysDown();
-
-                    if KeyPad::from_bits_truncate(keys).contains(KeyPad::SELECT) {
-                        break;
-                    }
-                }
-
-                ctru_sys::hidExit();
-            }
         }
     });
     std::panic::set_hook(new_hook);

ctru-rs/src/services/cam.rs

@@ -633,7 +633,7 @@ pub trait Camera: private::ConfigurableCamera {
     ///
     /// # Example
     ///
-    /// ```no_run
+    /// ```
     /// # use std::error::Error;
     /// # fn main() -> Result<(), Box<dyn Error>> {
     /// #

ctru-rs/src/services/gfx.rs

@@ -350,11 +350,11 @@ impl Gfx {
     /// By initializing the [`Gfx`] service as such, all functionality that relies on CPU manipulation of the framebuffers will
     /// be completely unavailable (usually resulting in an ARM panic if wrongly used).
     ///
-    /// Things such as [`Console`](crate::console::Console) and [`Screen::raw_framebuffer()`] will result in ARM exceptions.
+    /// Usage of functionality such as [`Console`](crate::console::Console) and [`Screen::raw_framebuffer()`] will result in ARM exceptions.
     ///
     /// # Example
     ///
-    /// ```no_run
+    /// ```
     /// # use std::error::Error;
     /// # fn main() -> Result<(), Box<dyn Error>> {
     /// #

ctru-rs/src/services/hid.rs

@@ -81,6 +81,7 @@ bitflags! {
 }
 
 /// Error enum for generic errors within the [`Hid`] service.
+#[non_exhaustive]
 #[derive(Copy, Clone, Debug, PartialEq, Eq)]
 pub enum Error {
     /// An attempt was made to access the accelerometer while disabled.
@@ -89,6 +90,28 @@ pub enum Error {
     UnavailableGyroscope,
 }
 
+/// Representation of the acceleration vector read by the accelerometer.
+///
+/// Have a look at [`Hid::enable_accelerometer()`] for more information.
+#[allow(missing_docs)]
+#[derive(Default, Copy, Clone, Debug, PartialEq, Eq)]
+pub struct Acceleration {
+    x: i16,
+    y: i16,
+    z: i16,
+}
+
+/// Representation of the angular rate read by the gyroscope.
+///
+/// Have a look at [`Hid::enable_gyroscope())`] for more information.
+#[allow(missing_docs)]
+#[derive(Default, Copy, Clone, Debug, PartialEq, Eq)]
+pub struct AngularRate {
+    roll: i16,
+    pitch: i16,
+    yaw: i16,
+}
+
 /// Handle to the HID service.
 pub struct Hid {
     active_accelerometer: bool,
@@ -336,7 +359,7 @@ impl Hid {
     ///
     /// # Example
     ///
-    /// ```no_run
+    /// ```
     /// # use std::error::Error;
     /// # fn main() -> Result<(), Box<dyn Error>> {
     /// #
@@ -365,7 +388,7 @@ impl Hid {
     ///
     /// # Example
     ///
-    /// ```no_run
+    /// ```
     /// # use std::error::Error;
     /// # fn main() -> Result<(), Box<dyn Error>> {
     /// #
@@ -373,28 +396,30 @@ impl Hid {
     /// let mut hid = Hid::new()?;
     ///
     /// // The accelerometer will start to register movements.
-    /// hid.set_accelerometer(true);
+    /// hid.set_accelerometer(true).unwrap();
     /// #
     /// # Ok(())
     /// # }
     /// ```
     #[doc(alias = "HIDUSER_EnableAccelerometer")]
     #[doc(alias = "HIDUSER_DisableAccelerometer")]
-    pub fn set_accelerometer(&mut self, enabled: bool) {
+    pub fn set_accelerometer(&mut self, enabled: bool) -> crate::Result<()> {
         if enabled {
-            let _ = unsafe { ctru_sys::HIDUSER_EnableAccelerometer() };
+            ResultCode(unsafe { ctru_sys::HIDUSER_EnableAccelerometer() })?;
         } else {
-            let _ = unsafe { ctru_sys::HIDUSER_DisableAccelerometer() };
+            ResultCode(unsafe { ctru_sys::HIDUSER_DisableAccelerometer() })?;
         }
 
         self.active_accelerometer = enabled;
+
+        Ok(())
     }
 
     /// Activate/deactivate the console's gyroscopic sensor.
     ///
     /// # Example
     ///
-    /// ```no_run
+    /// ```
     /// # use std::error::Error;
     /// # fn main() -> Result<(), Box<dyn Error>> {
     /// #
@@ -402,21 +427,23 @@ impl Hid {
     /// let mut hid = Hid::new()?;
     ///
     /// // The gyroscope will start to register positions.
-    /// hid.set_gyroscope(true);
+    /// hid.set_gyroscope(true).unwrap();
     /// #
     /// # Ok(())
     /// # }
     /// ```
     #[doc(alias = "HIDUSER_EnableGyroscope")]
     #[doc(alias = "HIDUSER_DisableGyroscope")]
-    pub fn set_gyroscope(&mut self, enabled: bool) {
+    pub fn set_gyroscope(&mut self, enabled: bool) -> crate::Result<()> {
         if enabled {
-            let _ = unsafe { ctru_sys::HIDUSER_EnableGyroscope() };
+            ResultCode(unsafe { ctru_sys::HIDUSER_EnableGyroscope() })?;
         } else {
-            let _ = unsafe { ctru_sys::HIDUSER_DisableGyroscope() };
+            ResultCode(unsafe { ctru_sys::HIDUSER_DisableGyroscope() })?;
         }
 
         self.active_gyroscope = enabled;
+
+        Ok(())
     }
 
     /// Returns the acceleration vector (x, y, z) registered by the accelerometer.
@@ -428,7 +455,7 @@ impl Hid {
     ///
     /// # Example
     ///
-    /// ```no_run
+    /// ```
     /// # use std::error::Error;
     /// # fn main() -> Result<(), Box<dyn Error>> {
     /// #
@@ -436,7 +463,7 @@ impl Hid {
     /// let mut hid = Hid::new()?;
     ///
     /// // The accelerometer will start to register movements.
-    /// hid.set_accelerometer(true);
+    /// hid.set_accelerometer(true).unwrap();
     ///
     /// // It's necessary to run `scan_input()` to update the accelerometer's readings.
     /// hid.scan_input();
@@ -448,7 +475,7 @@ impl Hid {
     /// # }
     /// ```
     #[doc(alias = "hidAccelRead")]
-    pub fn accelerometer_vector(&self) -> Result<(i16, i16, i16), Error> {
+    pub fn accelerometer_vector(&self) -> Result<Acceleration, Error> {
         if !self.active_accelerometer {
             return Err(Error::UnavailableAccelerometer);
         }
@@ -459,10 +486,14 @@ impl Hid {
             ctru_sys::hidAccelRead(&mut res);
         }
 
-        Ok((res.x, res.y, res.z))
+        Ok(Acceleration {
+            x: res.x,
+            y: res.y,
+            z: res.z,
+        })
     }
 
-    /// Returns the angular rate (roll,pitch,yaw) registered by the gyroscope.
+    /// Returns the angular rate registered by the gyroscope.
     ///
     /// # Errors
     ///
@@ -471,7 +502,7 @@ impl Hid {
     ///
     /// # Example
     ///
-    /// ```no_run
+    /// ```
     /// # use std::error::Error;
     /// # fn main() -> Result<(), Box<dyn Error>> {
     /// #
@@ -479,7 +510,7 @@ impl Hid {
     /// let mut hid = Hid::new()?;
     ///
     /// // The gyroscope will start to register positions.
-    ///  hid.set_gyroscope(true);
+    ///  hid.set_gyroscope(true).unwrap();
     ///
     /// // It's necessary to run `scan_input()` to update the gyroscope's readings.
     /// hid.scan_input();
@@ -491,7 +522,7 @@ impl Hid {
     /// # }
     /// ```
     #[doc(alias = "hidGyroRead")]
-    pub fn gyroscope_rate(&self) -> Result<(i16, i16, i16), Error> {
+    pub fn gyroscope_rate(&self) -> Result<AngularRate, Error> {
         if !self.active_gyroscope {
             return Err(Error::UnavailableGyroscope);
         }
@@ -502,7 +533,23 @@ impl Hid {
             ctru_sys::hidGyroRead(&mut res);
         }
 
-        Ok((res.x, res.y, res.z))
+        Ok(AngularRate {
+            roll: res.x,
+            pitch: res.y,
+            yaw: res.z,
+        })
+    }
+}
+
+impl From<Acceleration> for (i16, i16, i16) {
+    fn from(value: Acceleration) -> (i16, i16, i16) {
+        (value.x, value.y, value.z)
+    }
+}
+
+impl From<AngularRate> for (i16, i16, i16) {
+    fn from(value: AngularRate) -> (i16, i16, i16) {
+        (value.roll, value.pitch, value.yaw)
     }
 }
 

ctru-rs/src/services/ndsp/mod.rs

@@ -85,6 +85,7 @@ pub enum InterpolationType {
 }
 
 /// Errors returned by [`ndsp`](self) functions.
+#[non_exhaustive]
 #[derive(Copy, Clone, Debug, PartialEq, Eq)]
 pub enum Error {
     /// Channel with the specified ID does not exist.