You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
50 lines
1.0 KiB
50 lines
1.0 KiB
# SPDX-License-Identifier: Apache-2.0 |
|
|
|
CONFIG_SOC_SERIES_STM32F3X=y |
|
CONFIG_SOC_STM32F303XC=y |
|
# 72MHz system clock |
|
CONFIG_SYS_CLOCK_HW_CYCLES_PER_SEC=72000000 |
|
|
|
# Floating Point Options |
|
CONFIG_FLOAT=y |
|
|
|
# enable uart driver |
|
CONFIG_SERIAL=y |
|
|
|
# enable console |
|
CONFIG_CONSOLE=y |
|
CONFIG_UART_CONSOLE=y |
|
|
|
#enable I2C |
|
CONFIG_I2C=y |
|
|
|
#enable SPI |
|
CONFIG_SPI=y |
|
|
|
# enable pinmux |
|
CONFIG_PINMUX=y |
|
|
|
# enable GPIO |
|
CONFIG_GPIO=y |
|
|
|
# clock configuration |
|
CONFIG_CLOCK_CONTROL=y |
|
|
|
# kscan matrix |
|
CONFIG_KSCAN=y |
|
CONFIG_KSCAN_GPIO=y |
|
|
|
# Clock configuration for Cube Clock control driver |
|
CONFIG_CLOCK_STM32_HSE_CLOCK=8000000 |
|
CONFIG_CLOCK_STM32_SYSCLK_SRC_PLL=y |
|
# use HSE as PLL input |
|
CONFIG_CLOCK_STM32_PLL_SRC_HSE=y |
|
# however, the board does not have an external oscillator, so just use |
|
# the 8MHz clock signal coming from integrated STLink |
|
CONFIG_CLOCK_STM32_HSE_BYPASS=y |
|
# produce 72MHz clock at PLL output |
|
CONFIG_CLOCK_STM32_PLL_PREDIV=1 |
|
CONFIG_CLOCK_STM32_PLL_MULTIPLIER=9 |
|
CONFIG_CLOCK_STM32_AHB_PRESCALER=1 |
|
CONFIG_CLOCK_STM32_APB1_PRESCALER=2 |
|
CONFIG_CLOCK_STM32_APB2_PRESCALER=1
|
|
|