You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
1.6 KiB
1.6 KiB
Cradio
Cradio is a firmware for a few 34 key keyboards, including Cradio, Hypergolic and Sweep.
Pin arrangement
Some revisions of the aforementioned PCBs have slightly different pin arrangements compared to what's defined in cradio.dtsi. If you need to swap a few keys for your particular PCB, you can easily reorder the input-gpio definition in your own keymap file (i.e. in zmk-config/config/cradio.keymap):
/* Adjusted Cradio pin arrangement */
/* The position of Q and B keys have been swapped */
&kscan0 {
input-gpios
= <&pro_micro_d 6 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>
, <&pro_micro_a 0 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>
, <&pro_micro_a 1 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>
, <&pro_micro_a 2 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>
, <&pro_micro_a 3 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>
, <&pro_micro_d 15 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>
, <&pro_micro_d 14 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>
, <&pro_micro_d 16 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>
, <&pro_micro_d 10 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>
, <&pro_micro_d 1 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>
, <&pro_micro_d 2 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>
, <&pro_micro_d 3 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>
, <&pro_micro_d 4 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>
, <&pro_micro_d 5 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>
, <&pro_micro_d 7 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>
, <&pro_micro_d 8 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>
, <&pro_micro_d 9 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>
;
};
This &kscan0 block must be placed outside of any blocks surrounded by curly braces ({...}).