You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
 
 
 
 
 

69 lines
2.3 KiB

/*
* Copyright (c) 2017 I-SENSE group of ICCS
*
* SPDX-License-Identifier: MIT
*/
#include <kernel.h>
#include <device.h>
#include <init.h>
#include <drivers/pinmux.h>
#include <sys/sys_io.h>
#include <pinmux/stm32/pinmux_stm32.h>
/* pin assignments for STM32F3DISCOVERY board */
static const struct pin_config pinconf[] = {
#if DT_NODE_HAS_STATUS(DT_NODELABEL(usart1), okay) && CONFIG_SERIAL
{STM32_PIN_PC4, STM32F3_PINMUX_FUNC_PC4_USART1_TX},
{STM32_PIN_PC5, STM32F3_PINMUX_FUNC_PC5_USART1_RX},
#endif
#if DT_NODE_HAS_STATUS(DT_NODELABEL(usart2), okay) && CONFIG_SERIAL
{STM32_PIN_PA2, STM32F3_PINMUX_FUNC_PA2_USART2_TX},
{STM32_PIN_PA3, STM32F3_PINMUX_FUNC_PA3_USART2_RX},
#endif
#if DT_NODE_HAS_STATUS(DT_NODELABEL(i2c1), okay) && CONFIG_I2C
{STM32_PIN_PB6, STM32F3_PINMUX_FUNC_PB6_I2C1_SCL},
{STM32_PIN_PB7, STM32F3_PINMUX_FUNC_PB7_I2C1_SDA},
#endif
#if DT_NODE_HAS_STATUS(DT_NODELABEL(i2c2), okay) && CONFIG_I2C
{STM32_PIN_PA9, STM32F3_PINMUX_FUNC_PA9_I2C2_SCL},
{STM32_PIN_PA10, STM32F3_PINMUX_FUNC_PA10_I2C2_SDA},
#endif
#if DT_NODE_HAS_STATUS(DT_NODELABEL(spi1), okay) && CONFIG_SPI
#ifdef CONFIG_SPI_STM32_USE_HW_SS
{STM32_PIN_PA4, STM32F3_PINMUX_FUNC_PA4_SPI1_NSS},
#endif /* CONFIG_SPI_STM32_USE_HW_SS */
{STM32_PIN_PA5, STM32F3_PINMUX_FUNC_PA5_SPI1_SCK},
{STM32_PIN_PA6, STM32F3_PINMUX_FUNC_PA6_SPI1_MISO},
{STM32_PIN_PA7, STM32F3_PINMUX_FUNC_PA7_SPI1_MOSI},
#endif
#if DT_NODE_HAS_STATUS(DT_NODELABEL(spi2), okay) && CONFIG_SPI
#ifdef CONFIG_SPI_STM32_USE_HW_SS
{STM32_PIN_PB12, STM32F3_PINMUX_FUNC_PB12_SPI2_NSS},
#endif /* CONFIG_SPI_STM32_USE_HW_SS */
{STM32_PIN_PB13, STM32F3_PINMUX_FUNC_PB13_SPI2_SCK},
{STM32_PIN_PB14, STM32F3_PINMUX_FUNC_PB14_SPI2_MISO},
{STM32_PIN_PB15, STM32F3_PINMUX_FUNC_PB15_SPI2_MOSI},
#endif
#ifdef CONFIG_USB_DC_STM32
{STM32_PIN_PA11, STM32F3_PINMUX_FUNC_PA11_USB_DM},
{STM32_PIN_PA12, STM32F3_PINMUX_FUNC_PA12_USB_DP},
#endif /* CONFIG_USB_DC_STM32 */
#if DT_NODE_HAS_STATUS(DT_NODELABEL(can1), okay) && CONFIG_CAN
{STM32_PIN_PD0, STM32F3_PINMUX_FUNC_PD0_CAN1_RX},
{STM32_PIN_PD1, STM32F3_PINMUX_FUNC_PD1_CAN1_TX},
#endif
};
static int pinmux_stm32_init(struct device *port)
{
ARG_UNUSED(port);
stm32_setup_pins(pinconf, ARRAY_SIZE(pinconf));
return 0;
}
SYS_INIT(pinmux_stm32_init, PRE_KERNEL_1,
CONFIG_PINMUX_STM32_DEVICE_INITIALIZATION_PRIORITY);