b84d29c384
refactor(core): Use /omit-if-no-ref/ for behaviors.
...
* Use lesser-known DT features to skip behaviors not referenced
in the user keymap
* Update the behaviors to skip code if no nodes found.
* Remove some empty config/data structs where unused in
behaviors.
4 years ago
b4d63fb52c
feat(shields) Add encoder support to CRBN
...
Pin A maps to A2 (F5), pin B to A3 (F4).
Added keymappings to encoder on default and lower layers.
4 years ago
c94943da1c
style(crbn): Unify indentation from spaces to tabs
4 years ago
cd503ed17b
Feat combo layers ( #661 )
...
feat(combos): add layer filtering
Co-authored-by: KemoNine <mcrosson@kemonine.info>
4 years ago
9205ea1c70
fix(setup): Fix index to MakerDiary m.2 board
4 years ago
9a7908b632
behaviors(hold-tap): Implement quick_tap_ms (TAPPING_FORCE_HOLD)
...
Tap-and-hold a hold-tap to hold the tap behavior so it can repeat.
After a tap, if the same key is pressed within `quick_tap_ms`, the
tap behavior is always picked.
This is useful for things like `&ht LSHFT BACKSPACE` where holding
the backspace is required.
Implements #288 .
4 years ago
6c7ab0ce53
refactor(kscan): Fix polling of GPIO matrices.
...
* Add easier macros for conditional polling/interrupt code.
* Properly continue polling on intervals, without extra
enable/disable code for pins that is superfluous when not trying to
deal with interupts firing.
* Fix to allow multiple GPIO drivers when doing splits w/ IO expanders
4 years ago
2f352788c1
refactor(kscan): Remove explicit default n from kscan configs.
...
* Actually allow defaulting yes in other places.
4 years ago
bcc3d9b5a6
Update build/flash documentation.
...
Updated docs for the build and flash to have similar content to the new board page.
Added a bit about DFU in case someone were searching for that term.
4 years ago
592b98cd12
npm run prettier:format
4 years ago
100d06ae8b
Update docs for testing a new shield.
...
Clarifying the need for `west flash` in a dockerized environment and providing a high-level overview of testing a board with UF2 support.
4 years ago
33cd2caced
fix(boards): Shorten keyboard names that are too long
4 years ago
82173f354e
fix(core): Assert BLE device name is correct length
4 years ago
4e20bf5de1
refactor(behaviors): simplify hold-taps by not using _TRANSFORM_ENTRY
4 years ago
84d19fe79b
refactor(behaviors): factor out multiple uses of _TRANSFORM_ENTRY
4 years ago
f39121f82e
fix(docs): Remove comment about here being four profiles for splits
4 years ago
4f040fecdf
Add a missing log_strdup()
4 years ago
40694a0969
docs: remove redundant slash from "docs/" navigation item
...
Aligns with the blog item.
PR: #608
4 years ago
ddc5cbdca2
fix(docs): Set description to our tagline
4 years ago
cba85d400d
fix(docs): Only show push workflow builds in link
4 years ago
1adb2d5f84
feat(docs): add information on how to update the documentation to the docs
4 years ago
64a85b7a3f
chore(deps): bump DoozyX/clang-format-lint-action from v0.9 to v0.11
...
Bumps [DoozyX/clang-format-lint-action](https://github.com/DoozyX/clang-format-lint-action ) from v0.9 to v0.11.
- [Release notes](https://github.com/DoozyX/clang-format-lint-action/releases )
- [Commits](https://github.com/DoozyX/clang-format-lint-action/compare/v0.9...84b814a54950e27ac65a62069802df099405ef77 )
Signed-off-by: dependabot[bot] <support@github.com>
4 years ago
c925cf02dd
feature(sticky_keys): add quick-release
...
when quick-release is enabled, the sticky key is released immediately after another key is pressed
4 years ago
a89d8a6ea4
fix(blog): Updated link to combos docs.
4 years ago
1addfb9769
feat(blog): Add SOTF #4
4 years ago
7c24ab069c
fix(behaviors): Updated grsec snapshots for new log format.
4 years ago
7b7701ae90
feature(modifiers): add explicit modifiers
...
this makes LS(LEFT_CONTROL) work as if shift and control were both
pressed explicitly. Previously, the left shift would have been released
as soon as another key was pressed. The implicit behavior is useful in
case of LS(NUMBER_1) when rolling over to other keys.
Also see #361 .
4 years ago
0c30b49063
refactor(modifiers): define is_mods function
4 years ago
df4a5c8613
refactor(hid_listener): pass event struct instead of parameters
4 years ago
89567d3150
docs(sticky keys): document sticky keys and sticky layers
4 years ago
e8aa576781
refactor(docs): Move combos under Features.
...
* Since combos aren't a behavior, but a new high level keymap
feature, move under Features section.
4 years ago
a4aaa73f06
feat: Add WPM calculator and display widget
4 years ago
c0cab57c2d
run-test.sh: use the POSIX '-L 1' for xargs
...
This allows tests to be run on platforms where '-l'
isn't implemented, like MacOS.
4 years ago
5eeb310b2f
feat(grave-escape): implement grave-escape
...
closes #85
4 years ago
58ad5d4e86
Fix offset in NIBBLE transformation and keymap
...
The NIBBLE transformation was missing RC(0,0), which was causing some strange behavior in the kscan driver.
4 years ago
13e46bea81
docs(hold-tap): mark tapping_term_ms as code
...
Improves readability and consistency.
4 years ago
3368a81057
refactor(core): Combine `is_` and `cast_` event functions.
...
* Use a single `as_foo` generated function to conditionally
return a certain event type from a generic `zmk_event_t*`
pointer.
4 years ago
3fe2acc2d1
refactor(core): Extra event payloads to own types, refactor API.
...
* Make it easier to use *just* event payloads by defining the data,
and then having event manager macros generate "wrapper structs"
* Improve is_*/cast_* APIs to hide details of full event struct.
* Create `zmk_event_t` typedef to pass to event handlers.
* Bring event names inline w/ consistent `zmk_` prefix.
4 years ago
003db892ad
refactor(core): Extra position state change data struct.
...
* Separate header and data struct for the event.
* Remove duplicate struct in split code.
4 years ago
95acbd8859
fix(shields): Unflip left Microdox OLED.
4 years ago
5978990e6d
chore(core): replace `Pete Johanson` with `The ZMK Contributors`
...
Does not include boards and shields.
4 years ago
65e476df3e
fix(splits): Send pos notify from dedicated thread
...
* Avoid deadlocks by using a deadicated workqueue for sending
position state notifications from peripherals.
4 years ago
c11759bc79
fix(hid): Clear all matching usages, not just first.
...
* If various events get dropped, we can end up with duplicate
codes in our report, so tweak to ensure we look for all matches
and clear them when we have a keycode released.
4 years ago
a0c32bb47e
fix(bluetooth): improve LE param update logging
4 years ago
a5c39dfa76
fix(ble): Perform GATT notifies from dedicated queue.
...
* Zephyr BT stack frees TX buffers from system workqueue,
and to avoid blocking waiting to allocate, perform notify
from a dedicated queue.
4 years ago
4aa78a6f8d
fix(split): Use queue/work for peripheral events.
...
* Avoid corruption by using work to process
peripheral key position events on the main
work thread, like local kscan events are.
* Fixes #221
4 years ago
969e5568af
fix(boards): Define but don't enable uart0.
...
* Set pro-micro TX/RX pins, but don't enable the UART
by default.
4 years ago
1d18900a99
refactor(core): define usage page as uint16_t
...
Aligns with the HID specification.
Usage page values were sometimes declared as uint8_t and sometimes uint16_t. This commit aligns all instances with the HID specification for consistency.
PR: #521
4 years ago
feb0d5b90c
feat(combos): initial implementation
...
closes #45
4 years ago
90c2c6672f
fix(setup.sh): rename BF0-9000 to BFO-9000
...
Replaces BF0 (zero) with BFO.
Refs: dcd665999a#595
4 years ago
Pete Johanson