xenua/zmk - zmk - xenua's gitea

Author	SHA1	Message	Date
Pete Johanson	7d16186b7a	fix(ble): Remove unpair combo code. * Favor the settings reset images for this.	4 years ago
innovaker	348a44a8a3	refactor(app): Remove obsolete include's of `hid_usage_pages.h` This should've been done in `eff1b8223b`.	4 years ago
Pete Johanson	972158181d	fix(shields): Replace Corne w/ Microdox.	4 years ago
innovaker	194854ff7b	refactor(hid): Replace `0x01` with `HID_USAGE_CONSUMER_CONSUMER_CONTROL` This should've changed alongside: `711658206f`	4 years ago
Pete Johanson	a4dc92a2b9	refactor: Replace use of `cp` with `kp` for shields.	4 years ago
Pete Johanson	eff1b8223b	refactor(keys): Unify usage page. * Remove need for separate `&cp` behavior, but keep it for now for backward compat. * Refactor sensor inc/dec as well.	4 years ago
innovaker	c6abdb1890	fix(keys): Replace GUI with Application / Context Menu This was a misrepresentation in the standardized keys that originated in earlier code.	4 years ago
innovaker	aebe90908d	test: Replace superseded key names in test keymaps Replace deprecated key names (LSFT, LCTL, RCTL, M_NEXT). Replace abbreviated names with fully qualified names (LSFT, LCTL, LALT, LGUI, RGUI). Follow-up to #21.	4 years ago
innovaker	d748d8a749	refactor: Replace superseded key names Replace deprecated key names (LCTL, NUM_0, NUM_1). Replace abbreviated names with fully qualified names (LCTL, RGUI, NUM_0, NUM_1). Follow-up to #21.	4 years ago
innovaker	a65295c2a7	feat(keys): Standardize keys Deprecate superseded names with comments. Add standardized key names. Closes #21. Closes #158. Closes #161. Closes #246.	4 years ago
innovaker	7e795bf4f9	feat(hid): Enhance consumer report to support higher codes Switch from single byte to double byte usages. Allow the entire 0x0C page for future compatibility. Closes #234. Co-requisite of #21.	4 years ago
innovaker	711658206f	refactor(hid): Replace Zephyr usages with ZMK usages in HID reports Replace `USAGE_GEN_DESKTOP` with `HID_USAGE_GD`. Replace `USAGE_GEN_DESKTOP_KEYBOARD` with `HID_USAGE_GD_KEYBOARD`. Replace `USAGE_GEN_DESKTOP_KEYPAD` with `HID_USAGE_KEY`. Replace `0x0C` with `HID_USAGE_CONSUMER`. Closes #217.	4 years ago
innovaker	e925319e4c	refactor(hid): Replace deprecated HID usage page references Deprecate `USAGE_KEYPAD` and replace with `HID_USAGE_KEY`. Deprecate `USAGE_CONSUMER` and replace with `HID_USAGE_CONSUMER`. Closes #217.	4 years ago
innovaker	3c0a0ff308	feat(hid): Add preprocessor definitions for HID usages v1.21 Developed from specification: https://usb.org/sites/default/files/hut1_21.pdf Closes #217. Prerequisite of #21.	4 years ago
Nick	1af4221908	feat(underglow): Debounce state settings save	4 years ago
Pete Johanson	a29e041b1f	fix: Formatting fix.	4 years ago
Pete Johanson	32e7159373	refactor(hid): Mod defines in dedicated header.	4 years ago
Okke Formsma	55b5936d00	clang-format	4 years ago
Okke Formsma	4f258efbf1	initial implementation for modifiers https://github.com/zmkfirmware/zmk/issues/86	4 years ago
Nick	82a5736d08	fix(boards): Remap flash to account for bootloader	4 years ago
Nick Winans	89b8bfc95d	fix(battery): Only log if finding battery device failed Co-authored-by: Pete Johanson <peter@peterjohanson.com>	4 years ago
Nick	953de71646	feat(battery): Add BAS GATT reporting	4 years ago
Nick	74fa113d88	fix(boards): Rename BVD labels	4 years ago
Nick	8779563896	fix(bvd): Add SENSOR_CHAN_ALL support	4 years ago
Carey	3f4d47a06e	focus on refactor	4 years ago
Joel Spadin	821f054071	feat(endpoints): remove redundant connection check	4 years ago
Joel Spadin	440d09fd45	feat(endpoints): simplify behavior constants	4 years ago
Joel Spadin	2fe1fbb526	feat(endpoints): rename behavior to outputs "Outputs" is probably easier for most people to understand than "endpoints".	4 years ago
Joel Spadin	600bba25f0	feat(endpoints): add preferred endpoint setting Added a new setting to remember the user's preferred endpoint. When both USB and BLE are connected, the preferred endpoint will be used. Added a new behavior to control this setting. It supports commands: &end END_USB - Prefer USB output &end END_BLE - Prefer BLE output &end END_TOG - Toggle between USB and BLE	4 years ago
Joel Spadin	b538e60532	feat(endpoints): update on BLE profile change Added zmk_ble_active_profile_is_connected() to allow code outside ble.c to check the status of the active profile, and changed the ble_active_profile_changed event to also notify when the active profile connects or disconnects. Changed endpoint selection to to also update when the active profile changes, connects, or disconnects.	4 years ago
Joel Spadin	8f666cecc9	feat(endpoints): clear HID report on endpoint change This prevents stuck keys when switching endpoints by clearing everything in the HID report and sending one last report before switching to the new endpoint.	4 years ago
Joel Spadin	1d369ffa73	feat: only send HID reports to one endpoint Added some utility functions and an event for tracking the state of the USB connection. Updated endpoints.c to select a single endpoint to send HID reports to based on the status of the USB and BLE connections. Partially fixes #206. Future commits will add a user setting to control which endpoint is used if both USB and BLE are ready.	4 years ago
Carey	c5172e4337	move initialization priorities to advanced menu	4 years ago
innovaker	c402e953f6	feat(hid): Make keypad report boot friendly Add missing byte to make keypad report boot friendly.	4 years ago
Nigel Rodriguez	75b7f2a7c5	Remove bt unpair combo + fix keymap	4 years ago
innovaker	8ce7d8de01	refactor(hid): Refactor consumer report to a configurable size	4 years ago
innovaker	f4596fc784	refactor(hid): Refactor keypad report to use a configurable integer array Replace NKRO bit array with configurable integer (DV) array.	4 years ago
Jay Greco	8a98212a02	Update demux kscan driver as per PR feedback - Remove kscan_gpio_irq_callback - Remove kscan_gpio_irq_callback_handler - Remove irq_callbacks + Add TODO noting timer and sleep state interactions	4 years ago
Jay Greco	1a6fe846e4	Update NIBBLE keyboard name as per PR feedback - Revert accidental VS code settings change	4 years ago
Jay Greco	d90592aac5	Add NIBBLE shield + Added required files for nullbits NIBBLE	4 years ago
Jay Greco	1522c91d73	Add new kscan_gpio_demux driver + zmk,kscan_gpio_demux is now a compatible kscan option + kscan_gpio_demux is based heavily off of the implementation of kscan_gpio_matrix, modified to address cols using an n-to-1 demultiplexer chip instead of discrete IO + Added zmk,kscan_gpio_demux.yaml file * modified CMakeLists to include new source files	4 years ago
Nick	a008731103	Implement Kconfig and enhance error checks	4 years ago
innovaker	9c4b766bc6	feat(kscan_mock): Increase max number of events This is necessary for testing a large number of events (e.g. every key code) within a single build/pass. The u8_t limitation became apparent during end-to-end testing of #21.	4 years ago
Nick	7296b96797	Add Reviung41 Shield Definitions	4 years ago
Nick	63007fb6c1	fix: clang-format	4 years ago
Nick	adb07926b1	Remove newlib dep	4 years ago
Nigel Rodriguez	9d624740d9	Fix wrong comment tokens	4 years ago
Nigel Rodriguez	6a9a6e6d8e	Add Boardsource 3x4 shield	4 years ago
Nick	a67a8cd3b8	Check if fetch channel is supported	4 years ago
Nick	6047415b1c	Fix build for boards without voltage divider	4 years ago

1 2 3 4 5 ...

511 Commits (7d16186b7acd5113a59fc612cd53b7bae7f46f38)