Joel Spadin
0738b4b2b0
refactor(kscan): Match direct GPIO driver to matrix driver
...
Rewrote the direct GPIO kscan driver to match the improvements made to
the matrix driver in 82cb762698
and
f946dc6893
. It now uses the same
debouncing system as the matrix driver.
3 years ago
Nick Winans
54747a52f9
fix(sleep): use pm_power_state_force for proper device power management
3 years ago
Stefán Páll Sturluson
d7ba7a1bee
fix(codes): typo in C_SUBTITLES.
3 years ago
zhiayang
19cc96b86d
fix(boards): Fix battery ADC channel for Mikoto
3 years ago
Peter Johanson
eca37b6219
fix(boards): Add flash/settings for XIAO BLE
...
* Ensure flash/NVS/settings configs are enabled.
3 years ago
Peter Johanson
41dc774848
fix(boards): Fix key position 4 flakiness w/ RGB
...
* Remove MISO pin from pinctrl for BDN9 rev2 board, to avoid
the 4th switch being set up for an alternate function, which
was causing spurious key press events to be triggered.
3 years ago
Nick Winans
d33b35513b
feat(usb): Set default HID interval to 1ms (1000Hz)
3 years ago
Andrew Rae
b5efc7a7eb
feat(behaviors): Add `global-quick-tap`
3 years ago
Joel Spadin
11ab52582c
refactor(battery): Auto enable battery drivers
...
CONFIG_ZMK_BATTERY_NRF_VDDH and CONFIG_ZMK_BATTERY_VOLTAGE_DIVIDER are
now automatically enabled if a DT node with the matching "compatible"
property is present and enabled, so they no longer need to be manually
set for each board.
3 years ago
Joel Spadin
6d6efa32f5
refactor(kscan): Auto enable kscan drivers
...
The key scanning drivers are now automatically enabled when a DT node
with the matching "compatible" property is present and enabled, so they
no longer need to be manually set for each board.
3 years ago
Joel Spadin
a3a9510e47
refactor(kscan): Use GPIO DT spec macros in matrix driver
3 years ago
Nick Winans
2c7e5b9232
refactor(ble): Use auto phy/conn for split
3 years ago
Luigi311
13014d3f28
Remove descriptions and defaults for already set variables
...
Signed-off-by: Luigi311 <luigi311.lg@gmail.com>
3 years ago
Luigi311
7443a917cb
Add ble connection interval support
...
Signed-off-by: Luigi311 <luigi311.lg@gmail.com>
3 years ago
Peter Johanson
486174fc41
fix(split): Raise split notification stack size.
...
* Larger stack for split peripheral notifications
to avois stack overflow with logging on.
3 years ago
Peter Johanson
9f222fe700
fix: Exclude `sof` module to avoid build breakage.
3 years ago
Peter Johanson
d0176f3685
fix(boards): Enable battery driver for XIAO BLE.
3 years ago
Joel Spadin
f91472fbe5
fix(battery): Warn if using deprecated battery label
3 years ago
Joel Spadin
388e345c28
feat(battery)!: Add chosen node for battery
...
battery.c now uses the zmk,battery chosen node to select a battery
sensor. Using the node labeled "BATTERY" is maintained for backwards
compatibility but is now deprecated. Custom boards should switch to
using the chosen node.
# Conflicts:
# app/boards/arm/bluemicro840/bluemicro840_v1.dts
# app/boards/arm/nice60/nice60.dts
# app/boards/arm/nrfmicro/nrfmicro_13.dts
# Conflicts:
# app/boards/arm/bluemicro840/bluemicro840_v1.dts
3 years ago
Nick Winans
d08463e483
fix(ble): Restore manual connection params
3 years ago
Peter Johanson
40cd8da743
fix(usb): Split HID from core USB, logging fix.
...
* Split core USB init from USB HID init.
* Tweak logging to avoid "log loop" causing
spurious buffer messages on startup.
3 years ago
Peter Johanson
789fd03f8b
fix: Properly use zmkfirmware Zephyr version.
3 years ago
Peter Johanson
1dccb7fe50
fix(hid): Use a full valid range for consumer page
...
* Switch to a logical max for the consumer page
that avoid signed issue, and still allows
full range of documented consumer page
values.
3 years ago
Peter Johanson
22c487f276
feat(boards): Add BDN9 rev2 RGB support
3 years ago
Peter Johanson
b44410ac44
feat(shields): Add Hummingbird shield
...
* Reference shield for the Seeed(uino) XIAO interconnect.
3 years ago
DoctorNefario
20a72263b2
fix(behaviors): Prevent accidental transparent behavior return values.
...
Needed because k_work_reschedule can return positive success codes.
3 years ago
Kurtis Lew
7e844bc269
fix(behaviors): Remove `behavior_hold_tap_data`
...
Related to discussion during development of tap-dance behavior:
https://github.com/zmkfirmware/zmk/pull/1139#discussion_r810564682
This PR suggests to remove the `struct behavior_hold_tap_data` because is not used to store data for each hold tap.
3 years ago
Peter Johanson
3eb3548a00
refactor(tests): Use GH Actions matrix for tests.
...
* To parallelize our tests, generate a dynamic matrix
of tests to run.
3 years ago
Peter Johanson
af4753cae1
fix(behaviors): Missed refactor for PM callback.
3 years ago
Peter Johanson
f4fb5c6fba
fix(build): Add local vendor prefix file.
...
Properly document `zmk` local vendor prefix.
3 years ago
Peter Johanson
953f5212a8
refactor(tests): Move to native_posix_64 target.
...
* Allows removing multilib from docker images
* Run properly in aarch64 host docker
containers for testing on Rasberry Pi.
* Small sticky-keys fix to initialize w/ correct
constant for max uin32_t value.
3 years ago
Peter Johanson
97e62f2da5
feat(boards): Add Seeed(uino) XIAO interconnect
...
* Document the Seeed(uino) XIAO interconnect
* Add metadata files for two upstream boards, XIAO and XIAO BLE.
* Add conf and overlay files to properly configure the boards
for ZMK use.
3 years ago
Peter Johanson
9368f6200c
fix(display): Add zephyr,display chosen nodes.
3 years ago
Peter Johanson
5015a88545
fix(split): Proper role checking in BT callbacks.
...
* Properly react to events only for connections
with the correct role.
3 years ago
Peter Johanson
917c6a0660
fix(power): Fix ext power generic driver.
...
* Adjust for device API changes to fetch
ext power driver instance from settings
callback.
* New PM action callback API.
3 years ago
Peter Johanson
4eb8f8cd23
refactor(boards): Use Zephyr UF2 generation.
3 years ago
Peter Johanson
cc51562f78
fix(boards): Move ARM clock config to DTS.
3 years ago
Peter Johanson
9203ae217b
fix(activity): Use proper PM state for sleep.
3 years ago
Peter Johanson
94ac100b6b
refactor: Move to Zephyr v3.0.0 + ZMK fixes.
3 years ago
Peter Johanson
df2e993300
feat(ble): Disable `BT_GATT_AUTO_SEC_REQ`.
...
* Better compatibility w/ some operating systems, we already
set security level on connects.
3 years ago
Peter Johanson
ded79ba422
fix: Remove deprecated pinmux code.
3 years ago
Peter Johanson
4df83a9c0d
refactor: Move away from deprecated PM callback.
3 years ago
Peter Johanson
bf2fc68070
fix(underglow): Add newly required color-mapping prop.
3 years ago
Peter Johanson
8afe124153
fix(tests): Fix snapshots to account for formatting changes.
3 years ago
Peter Johanson
c5ab8a9444
refactor: Move the DT based CDC ACM setup.
3 years ago
Peter Johanson
2c5d5fde51
refactor: `k_work_queue` API updates.
3 years ago
Peter Johanson
79ab60dfe5
refactor: Move to new PM API/Kconfig settings.
3 years ago
Peter Johanson
6287819fcc
refactor: Move to USB_DEVICE_STACK symbol.
...
See: https://docs.zephyrproject.org/latest/releases/release-notes-2.7.html#changes-in-this-release
3 years ago
Peter Johanson
3528e1b497
refactor: Move to newer API for IO channels.
...
See: https://docs.zephyrproject.org/latest/releases/release-notes-2.6.html#api-changes
3 years ago
Peter Johanson
40d8470664
refactor: Handle HID macro/API changes in Zephyr.
3 years ago