Browse Source

Remove RGB, Remove debug, Add Copyright and Licenses

xmkb
tominabox1 4 years ago
parent
commit
cf003262e6
  1. 3
      app/boards/shields/qaz/Kconfig.defconfig
  2. 5
      app/boards/shields/qaz/Kconfig.shield
  3. 22
      app/boards/shields/qaz/boards/nice_nano.overlay
  4. 26
      app/boards/shields/qaz/qaz.conf
  5. 49
      app/boards/shields/qaz/qaz.keymap
  6. 7
      app/boards/shields/qaz/qaz.overlay

3
app/boards/shields/qaz/Kconfig.defconfig

@ -1,3 +1,6 @@
# Copyright (c) 2020 TJ Campie
# SPDX-License-Identifier: MIT
if SHIELD_QAZ if SHIELD_QAZ
config ZMK_KEYBOARD_NAME config ZMK_KEYBOARD_NAME

5
app/boards/shields/qaz/Kconfig.shield

@ -1,2 +1,5 @@
config SHIELD_MY_BOARD # Copyright (c) 2020 TJ Campie
# SPDX-License-Identifier: MIT
config SHIELD_MY_BOARD
def_bool $(shields_list_contains,qaz) def_bool $(shields_list_contains,qaz)

22
app/boards/shields/qaz/boards/nice_nano.overlay

@ -1,22 +0,0 @@
&spi1 {
compatible = "nordic,nrf-spi";
status = "okay";
mosi-pin = <47>;
// Unused pins, needed for SPI definition, but not used by the ws2812 driver itself.
sck-pin = <5>;
miso-pin = <7>;
led_strip: ws2812@0 {
compatible = "worldsemi,ws2812-spi";
label = "WS2812";
/* SPI */
reg = <0>; /* ignored, but necessary for SPI bindings */
spi-max-frequency = <4000000>;
/* WS2812 */
chain-length = <21>; /* number of LEDs */
spi-one-frame = <0x70>;
spi-zero-frame = <0x40>;
};
};

26
app/boards/shields/qaz/qaz.conf

@ -1,26 +0,0 @@
CONFIG_ZMK_RGB_UNDERGLOW=n
# Use the STRIP config specific to the LEDs you're using
CONFIG_WS2812_STRIP=n
# Turn on logging, and set ZMK logging to debug output
CONFIG_LOG=y
CONFIG_ZMK_LOG_LEVEL_DBG=y
# Turn on USB CDC ACM device
CONFIG_USB=y
CONFIG_USB_DEVICE_STACK=y
CONFIG_USB_CDC_ACM=y
CONFIG_USB_CDC_ACM_RINGBUF_SIZE=1024
CONFIG_USB_CDC_ACM_DEVICE_NAME="CDC_ACM"
CONFIG_USB_CDC_ACM_DEVICE_COUNT=1
# Enable serial console
CONFIG_SERIAL=y
CONFIG_CONSOLE=y
CONFIG_UART_INTERRUPT_DRIVEN=y
CONFIG_UART_LINE_CTRL=y
# Enable USB UART, and set the console device
CONFIG_UART_CONSOLE=y
CONFIG_USB_UART_CONSOLE=y
CONFIG_UART_CONSOLE_ON_DEV_NAME="CDC_ACM_0"
CONFIG_USB_UART_DTR_WAIT=n

49
app/boards/shields/qaz/qaz.keymap

@ -1,46 +1,9 @@
#include <behaviors.dtsi> #include <behaviors.dtsi>
#include <dt-bindings/zmk/keys.h> #include <dt-bindings/zmk/keys.h>
#include <dt-bindings/zmk/rgb.h>
#define DEFAULT 0 #define DEFAULT 0
#define NUM_SYM 1 #define NUM_SYM 1
#define NAV 2 #define NAV 2
/ {
behaviors {
rst: behavior_tap_hold1 {
compatible = "zmk,behavior-tap-hold";
label = "Bootloader Tap - Reset Hold";
#binding-cells = <0>;
hold_ms = <200>;
bindings = <&bootloader>, <&reset>, <&kp BKSP>;
};
num_spc: behavior_tap_hold2 {
compatible = "zmk,behavior-tap-hold";
label = "Space Tap - Num/Sym Hold";
#binding-cells = <0>;
hold_ms = <300>;
bindings = <&kp SPC>, <&mo NUM_SYM>;
};
ent_nav: behavior_tap_hold{
compatible = "zmk,behavior-tap-hold";
label = "Return Tap - Nav Hold";
#binding-cells = <0>;
hold_ms = <100>;
bindings = <&kp RET>, <&mo NAV>;
};
com_col: behavior_tap_hold10 {
compatible = "zmk,behavior-tap-hold";
label = ", tap, hold";
#binding-cells = <0>;
hold_ms = <200>;
bindings = <&kp CMMA>, <&kp SCLN>, <&kp BKSP>;
};
};
};
/ { / {
keymap { keymap {
@ -48,10 +11,10 @@
default_layer { default_layer {
bindings = < bindings = <
&kp Q &kp W &kp F &kp P &kp G &kp J &kp L &kp U &kp Y &kp QUOT &kp Q &kp W &kp E &kp R &kp T &kp Y &kp U &kp I &kp O &kp P
&kp A &kp R &kp S &kp T &kp D &kp H &kp N &kp E &kp I &kp O &kp A &kp S &kp D &kp F &kp G &kp H &kp J &kp K &kp L &kp RET
&kp Z &kp X &kp C &kp V &kp B &kp K &kp M &com_col &kp DOT &kp Z &kp X &kp C &kp V &kp B &kp N &kp M &kp CMMA &kp DOT
&kp LSFT &kp LGUI &kp TAB &ent_nav &num_spc &kp LCTL &kp LALT &kp FSLH &kp LSFT &kp LGUI &kp LALT &mo NAV &kp SPC &mo NUM_SYM &kp QUOT &kp FSLH
>; >;
}; };
num_sym { num_sym {
@ -59,7 +22,7 @@
&kp NUM_1 &kp NUM_2 &kp NUM_3 &kp NUM_4 &kp NUM_5 &kp NUM_6 &kp NUM_7 &kp NUM_8 &kp NUM_9 &kp NUM_0 &kp NUM_1 &kp NUM_2 &kp NUM_3 &kp NUM_4 &kp NUM_5 &kp NUM_6 &kp NUM_7 &kp NUM_8 &kp NUM_9 &kp NUM_0
&trans &trans &trans &trans &trans &trans &trans &trans &kp EQL &kp MINUS &trans &trans &trans &trans &trans &trans &trans &trans &kp EQL &kp MINUS
&kp DEL &none &none &none &none &none &none &none &kp DOT &kp DEL &none &none &none &none &none &none &none &kp DOT
&rst &none &none &trans &trans &kp RET &trans &kp FSLH &bootloader &reset &none &trans &trans &kp RET &trans &kp FSLH
>; >;
}; };
@ -68,7 +31,7 @@
&none &none &none &none &none &none &none &kp UARW &none &kp BKSP &none &none &none &none &none &none &none &kp UARW &none &kp BKSP
&trans &trans &trans &trans &none &none &kp LARW &kp DARW &kp RARW &none &trans &trans &trans &trans &none &none &kp LARW &kp DARW &kp RARW &none
&none &none &none &none &none &none &none &none &none &none &none &none &none &none &none &none &none &none
&rgb_ug RGB_TOG &rgb_ug RGB_EFF &none &trans &trans &kp RET &trans &kp FSLH &none &none &none &none &none &trans &trans &kp RET &trans &kp FSLH
>; >;
}; };
}; };

7
app/boards/shields/qaz/qaz.overlay

@ -1,10 +1,15 @@
/*
* Copyright (c) 2020 TJ Campie
*
* SPDX-License-Identifier: MIT
*/
#include <dt-bindings/zmk/matrix-transform.h> #include <dt-bindings/zmk/matrix-transform.h>
/ { / {
chosen { chosen {
zmk,kscan = &kscan0; zmk,kscan = &kscan0;
zmk,matrix_transform = &default_transform; zmk,matrix_transform = &default_transform;
zmk,underglow = &led_strip;
}; };
default_transform: keymap_transform_0 { default_transform: keymap_transform_0 {

Loading…
Cancel
Save