Browse Source

Merge pull request #297 from Nicell/boards/reviung41

Add Reviung41 Shield Definitions
xmkb
Pete Johanson 4 years ago committed by GitHub
parent
commit
c707ab45ef
No known key found for this signature in database
GPG Key ID: 4AEE18F83AFDEB23
  1. 1
      .github/workflows/build.yml
  2. 9
      app/boards/shields/reviung41/Kconfig.defconfig
  3. 5
      app/boards/shields/reviung41/Kconfig.shield
  4. 28
      app/boards/shields/reviung41/boards/nice_nano.overlay
  5. 3
      app/boards/shields/reviung41/reviung41.conf
  6. 72
      app/boards/shields/reviung41/reviung41.keymap
  7. 52
      app/boards/shields/reviung41/reviung41.overlay
  8. 1
      docs/docs/hardware.md
  9. 6
      docs/static/setup.ps1
  10. 15
      docs/static/setup.sh

1
.github/workflows/build.yml

@ -18,6 +18,7 @@ jobs: @@ -18,6 +18,7 @@ jobs:
- lily58_right
- iris_left
- iris_right
- reviung41
- romac
- romac_plus
- settings_reset

9
app/boards/shields/reviung41/Kconfig.defconfig

@ -0,0 +1,9 @@ @@ -0,0 +1,9 @@
# Copyright (c) 2020 The ZMK Contributors
# SPDX-License-Identifier: MIT
if SHIELD_REVIUNG41
config ZMK_KEYBOARD_NAME
default "Reviung41"
endif

5
app/boards/shields/reviung41/Kconfig.shield

@ -0,0 +1,5 @@ @@ -0,0 +1,5 @@
# Copyright (c) 2020 The ZMK Contributors
# SPDX-License-Identifier: MIT
config SHIELD_REVIUNG41
def_bool $(shields_list_contains,reviung41)

28
app/boards/shields/reviung41/boards/nice_nano.overlay

@ -0,0 +1,28 @@ @@ -0,0 +1,28 @@
&spi1 {
compatible = "nordic,nrf-spi";
status = "okay";
mosi-pin = <6>;
// Unused pins, needed for SPI definition, but not used by the ws2812 driver itself.
sck-pin = <5>;
miso-pin = <7>;
led_strip: ws2812@0 {
compatible = "worldsemi,ws2812-spi";
label = "WS2812";
/* SPI */
reg = <0>; /* ignored, but necessary for SPI bindings */
spi-max-frequency = <4000000>;
/* WS2812 */
chain-length = <11>; /* arbitrary; change at will */
spi-one-frame = <0x70>;
spi-zero-frame = <0x40>;
};
};
/ {
chosen {
zmk,underglow = &led_strip;
};
};

3
app/boards/shields/reviung41/reviung41.conf

@ -0,0 +1,3 @@ @@ -0,0 +1,3 @@
# Uncomment the following lines to enable RGB underglow
# CONFIG_ZMK_RGB_UNDERGLOW=y
# CONFIG_WS2812_STRIP=y

72
app/boards/shields/reviung41/reviung41.keymap

@ -0,0 +1,72 @@ @@ -0,0 +1,72 @@
/*
* Copyright (c) 2020 The ZMK Contributors
*
* SPDX-License-Identifier: MIT
*/
#include <behaviors.dtsi>
#include <dt-bindings/zmk/keys.h>
#include <dt-bindings/zmk/bt.h>
#include <dt-bindings/zmk/rgb.h>
/ {
keymap {
compatible = "zmk,keymap";
default_layer {
// -------------------------------------------------------------------------------------
// | TAB | Q | W | E | R | T | | Y | U | I | O | P | BKSP |
// | CTRL | A | S | D | F | G | | H | J | K | L | ; | ' |
// | SHFT | Z | X | C | V | B | | N | M | , | . | / | SHFT(RET) |
// | ALT | LWR | SPC | RSE | ALT |
bindings = <
&kp TAB &kp Q &kp W &kp E &kp R &kp T &kp Y &kp U &kp I &kp O &kp P &kp BKSP
&kp LCTL &kp A &kp S &kp D &kp F &kp G &kp H &kp J &kp K &kp L &kp SCLN &kp QUOT
&kp LSFT &kp Z &kp X &kp C &kp V &kp B &kp N &kp M &kp CMMA &kp DOT &kp FSLH &mt RSFT RET
&kp LALT &mo 1 &kp SPC &mo 2 &kp RALT
>;
};
lower_layer {
// ----------------------------------------------------------------------------------
// | | ! | @ | # | $ | % | | ^ | & | * | ( | ) | DEL |
// | | _ | + | { | } | "|" | | LFT | DWN | UP | RGT | ` | ~ |
// | | ESC | GUI | ALT | CAPS| " | | HOME| END | PGUP| PGDN| PRSC| SHFT(RET) |
// | | | RET | ADJ | |
bindings = <
&trans &kp BANG &kp ATSN &kp HASH &kp CURU &kp PRCT &kp CRRT &kp AMPS &kp NUM_8 &kp LPRN &kp RPRN &kp DEL
&trans &kp MINUS &kp KPLS &kp LCUR &kp RCUR &kp PIPE &kp LARW &kp DARW &kp UARW &kp RARW &kp GRAV &kp GRAV
&trans &kp ESC &kp LGUI &kp LALT &kp CLCK &kp QUOT &kp HOME &kp END &kp PGUP &kp PGDN &kp PRSC &mt RSFT RET
&trans &trans &kp RET &mo 3 &trans
>;
};
raise_layer {
// -----------------------------------------------------------------------------------------
// | | 1 | 2 | 3 | 4 | 5 | | 6 | 7 | 8 | 9 | 0 | DEL |
// | | - | = | [ | ] | \ | | F1 | F2 | F3 | F4 | F5 | F6 |
// | | ESC | GUI | ALT | CAPS| " | | F7 | F8 | F9 | F10 | F11 | F12 |
// | | ADJ | BKSP | | |
bindings = <
&trans &kp NUM_1 &kp NUM_2 &kp NUM_3 &kp NUM_4 &kp NUM_5 &kp NUM_6 &kp NUM_7 &kp NUM_8 &kp NUM_9 &kp NUM_0 &kp DEL
&trans &kp MINUS &kp EQL &kp LBKT &kp RBKT &kp BSLH &kp F1 &kp F2 &kp F3 &kp F4 &kp F5 &kp F6
&trans &kp ESC &kp LGUI &kp RALT &kp CLCK &kp QUOT &kp F7 &kp F8 &kp F9 &kp F10 &kp F11 &kp F12
&trans &mo 3 &kp BKSP &trans &trans
>;
};
adjust_layer {
// -----------------------------------------------------------------------------------------
// | RGB BRI+ | RGB SAT+ | RGB HUE+ | RGB ANI+ | | RGB TOG | | BT1 | BT2 | BT3 | BT4 | BT5 | BT CLR |
// | RGB BRI- | RGB SAT- | RGB HUE- | RGB ANI+ | | | | | | | | | |
// | | | | | | | | RESET | | | | | |
// | | | | | |
bindings = <
&rgb_ug RGB_BRI &rgb_ug RGB_SAI &rgb_ug RGB_HUI &rgb_ug RGB_EFF &none &rgb_ug RGB_TOG &bt BT_SEL 0 &bt BT_SEL 1 &bt BT_SEL 2 &bt BT_SEL 3 &bt BT_SEL 4 &bt BT_CLR
&rgb_ug RGB_BRD &rgb_ug RGB_SAD &rgb_ug RGB_HUD &rgb_ug RGB_EFR &none &none &none &none &none &none &none &none
&none &none &none &none &none &none &reset &none &none &none &none &none
&trans &trans &tog 3 &trans &trans
>;
};
};
};

52
app/boards/shields/reviung41/reviung41.overlay

@ -0,0 +1,52 @@ @@ -0,0 +1,52 @@
/*
* Copyright (c) 2020 The ZMK Contributors
*
* SPDX-License-Identifier: MIT
*/
#include <dt-bindings/zmk/matrix-transform.h>
/ {
chosen {
zmk,kscan = &kscan0;
zmk,matrix_transform = &default_transform;
};
default_transform: keymap_transform_0 {
compatible = "zmk,matrix-transform";
columns = <6>;
rows = <7>;
map = <
RC(0,0) RC(0,1) RC(0,2) RC(0,3) RC(0,4) RC(0,5) RC(3,0) RC(3,1) RC(3,2) RC(3,3) RC(3,4) RC(3,5)
RC(1,0) RC(1,1) RC(1,2) RC(1,3) RC(1,4) RC(1,5) RC(4,0) RC(4,1) RC(4,2) RC(4,3) RC(4,4) RC(4,5)
RC(2,0) RC(2,1) RC(2,2) RC(2,3) RC(2,4) RC(2,5) RC(5,0) RC(5,1) RC(5,2) RC(5,3) RC(5,4) RC(5,5)
RC(6,0) RC(6,1) RC(6,2) RC(6,3) RC(6,4)
>;
};
kscan0: kscan_0 {
compatible = "zmk,kscan-gpio-matrix";
label = "KSCAN";
diode-direction = "col2row";
col-gpios
= <&pro_micro_d 4 GPIO_ACTIVE_HIGH>
, <&pro_micro_d 5 GPIO_ACTIVE_HIGH>
, <&pro_micro_d 6 GPIO_ACTIVE_HIGH>
, <&pro_micro_d 7 GPIO_ACTIVE_HIGH>
, <&pro_micro_d 8 GPIO_ACTIVE_HIGH>
, <&pro_micro_d 9 GPIO_ACTIVE_HIGH>
;
row-gpios
= <&pro_micro_a 3 (GPIO_ACTIVE_HIGH | GPIO_PULL_DOWN)>
, <&pro_micro_a 2 (GPIO_ACTIVE_HIGH | GPIO_PULL_DOWN)>
, <&pro_micro_a 1 (GPIO_ACTIVE_HIGH | GPIO_PULL_DOWN)>
, <&pro_micro_a 0 (GPIO_ACTIVE_HIGH | GPIO_PULL_DOWN)>
, <&pro_micro_d 15 (GPIO_ACTIVE_HIGH | GPIO_PULL_DOWN)>
, <&pro_micro_d 14 (GPIO_ACTIVE_HIGH | GPIO_PULL_DOWN)>
, <&pro_micro_d 16 (GPIO_ACTIVE_HIGH | GPIO_PULL_DOWN)>
;
};
};

1
docs/docs/hardware.md

@ -28,6 +28,7 @@ That being said, there are currently only a few specific [boards](/docs/faq#what @@ -28,6 +28,7 @@ That being said, there are currently only a few specific [boards](/docs/faq#what
- [Lily58](https://github.com/kata0510/Lily58) (`lily58_left` and `lily58_right`)
- [Sofle](https://github.com/josefadamcik/SofleKeyboard) (`sofle_left` and `sofle_right`)
- [Splitreus62](https://github.com/Na-Cly/splitreus62) (`splitreus62_left` and `splitreus62_right`)
- [Reviung41](https://github.com/gtips/reviung/tree/master/reviung41) (`reviung41`)
- [RoMac+ v4](https://www.littlekeyboards.com/products/romac) (`romac_plus`)
- [RoMac v2](https://mechboards.co.uk/shop/kits/romac-macro-pad/) (`romac`)
- [QAZ](https://www.cbkbd.com/product/qaz-keyboard-kit) (`qaz`)

6
docs/static/setup.ps1 vendored

@ -91,9 +91,9 @@ Write-Host "Keyboard Shield Selection:" @@ -91,9 +91,9 @@ Write-Host "Keyboard Shield Selection:"
$prompt = "Pick a keyboard"
# TODO: Add support for "Other" and linking to docs on adding custom shields in user config repos.
$options = "Kyria", "Lily58", "Corne", "Splitreus62", "Sofle", "Iris", "RoMac", "RoMac+", "makerdiary M60", "Microdox", "TG4X", "QAZ"
$names = "kyria", "lily58", "corne", "splitreus62", "sofle", "iris", "romac", "romac_plus", "m60", "microdox", "tg4x", "qaz"
$splits = "y", "y", "y", "y", "y", "y", "n", "n", "n", "y", "n", "n"
$options = "Kyria", "Lily58", "Corne", "Splitreus62", "Sofle", "Iris", "Reviung41", "RoMac", "RoMac+", "makerdiary M60", "Microdox", "TG4X", "QAZ"
$names = "kyria", "lily58", "corne", "splitreus62", "sofle", "iris", "reviung41", "romac", "romac_plus", "m60", "microdox", "tg4x", "qaz"
$splits = "y", "y", "y", "y", "y", "y", "n", "n", "n", "n", "y", "n", "n"
$choice = Get-Choice-From-Options -Options $options -Prompt $prompt
$shield_title = $($options[$choice])

15
docs/static/setup.sh vendored

@ -92,7 +92,7 @@ echo "" @@ -92,7 +92,7 @@ echo ""
echo "Keyboard Shield Selection:"
prompt="Pick an keyboard:"
options=("Kyria" "Lily58" "Corne" "Splitreus62" "Sofle" "Iris" "RoMac" "RoMac+" "makerdiary M60" "Microdox" "TG4X" "QAZ")
options=("Kyria" "Lily58" "Corne" "Splitreus62" "Sofle" "Iris" "Reviung41" "RoMac" "RoMac+" "makerdiary M60" "Microdox" "TG4X" "QAZ")
PS3="$prompt "
# TODO: Add support for "Other" and linking to docs on adding custom shields in user config repos.
@ -107,12 +107,13 @@ select opt in "${options[@]}" "Quit"; do @@ -107,12 +107,13 @@ select opt in "${options[@]}" "Quit"; do
4 ) shield_title="Splitreus62" shield="splitreus62"; split="y"; break;;
5 ) shield_title="Sofle" shield="sofle"; split="y"; break;;
6 ) shield_title="Iris" shield="iris"; split="y"; break;;
7 ) shield_title="RoMac" shield="romac"; split="n"; break;;
8 ) shield_title="RoMac+" shield="romac_plus"; split="n"; break;;
9 ) shield_title="M60" shield="m60"; split="n"; break;;
10 ) shield_title="Microdox" shield="microdox"; split="y"; break;;
11 ) shield_title="TG4X" shield="tg4x"; split="n"; break;;
12 ) shield_title="QAZ" shield="qaz"; split="n"; break;;
7 ) shield_title="Reviung41" shield="reviung41"; split="n"; break;;
8 ) shield_title="RoMac" shield="romac"; split="n"; break;;
9 ) shield_title="RoMac+" shield="romac_plus"; split="n"; break;;
10 ) shield_title="M60" shield="m60"; split="n"; break;;
11 ) shield_title="Microdox" shield="microdox"; split="y"; break;;
12 ) shield_title="TG4X" shield="tg4x"; split="n"; break;;
13 ) shield_title="QAZ" shield="qaz"; split="n"; break;;
# Add link to docs on adding your own custom shield in your ZMK config!
# $(( ${#options[@]}+1 )) ) echo "Other!"; break;;

Loading…
Cancel
Save