diff --git a/docs/docs/assets/usb-logging/com_port.PNG b/docs/docs/assets/usb-logging/com_port.PNG
new file mode 100644
index 00000000..35934b82
Binary files /dev/null and b/docs/docs/assets/usb-logging/com_port.PNG differ
diff --git a/docs/docs/assets/usb-logging/putty.PNG b/docs/docs/assets/usb-logging/putty.PNG
new file mode 100644
index 00000000..b53d5369
Binary files /dev/null and b/docs/docs/assets/usb-logging/putty.PNG differ
diff --git a/docs/docs/dev-guide-usb-logging.md b/docs/docs/dev-guide-usb-logging.md
index fa4b63b0..62977c77 100644
--- a/docs/docs/dev-guide-usb-logging.md
+++ b/docs/docs/dev-guide-usb-logging.md
@@ -62,7 +62,13 @@ sudo tio /dev/ttyACM0
 </TabItem>
 <TabItem value="win">
 
-On Windows, you can use the Arduino IDE which contains a built-in Serial Monitor. Download and install it from [their website](https://www.arduino.cc/en/main/software), then connect your board and under Tools select "Serial Monitor".
+On Windows, you can use [PuTTY](https://www.putty.org/). Once installed, use Device Manager to figure out which COM port your controller is communicating on (listed under 'Ports (COM & LPT)') and specify that as the 'Serial line' in PuTTY.
+
+![Controller COM port](assets/usb-logging/com_port.png)
+
+![PuTTY settings](assets/usb-logging/putty.png)
+
+If you already have the Ardunio IDE installed you can also use its built-in Serial Monitor.
 
 </TabItem>
 </Tabs>