Browse Source

Add bluemicro support

xmkb
Derek 4 years ago
parent
commit
9dd8217cd4
  1. 8
      app/boards/arm/bluemicro52840_v1/CMakeLists.txt
  2. 8
      app/boards/arm/bluemicro52840_v1/Kconfig.board
  3. 30
      app/boards/arm/bluemicro52840_v1/Kconfig.defconfig
  4. 52
      app/boards/arm/bluemicro52840_v1/arduino_pro_micro_pins.dtsi
  5. 103
      app/boards/arm/bluemicro52840_v1/bluemicro52840_v1.dts
  6. 15
      app/boards/arm/bluemicro52840_v1/bluemicro52840_v1.yaml
  7. 20
      app/boards/arm/bluemicro52840_v1/bluemicro52840_v1_defconfig
  8. 5
      app/boards/arm/bluemicro52840_v1/board.cmake

8
app/boards/arm/bluemicro52840_v1/CMakeLists.txt

@ -0,0 +1,8 @@
set_property(GLOBAL APPEND PROPERTY extra_post_build_commands
COMMAND ${PYTHON_EXECUTABLE} ${ZEPHYR_BASE}/../tools/uf2/utils/uf2conv.py
-c
-b 0x26000
-f 0xADA52840
-o ${PROJECT_BINARY_DIR}/${CONFIG_KERNEL_BIN_NAME}.uf2
${PROJECT_BINARY_DIR}/${CONFIG_KERNEL_BIN_NAME}.bin
)

8
app/boards/arm/bluemicro52840_v1/Kconfig.board

@ -0,0 +1,8 @@
# BlueMicro52840_V1 board configuration
# Copyright (c) 2020 Pete Johanson, Derek Schmell
# SPDX-License-Identifier: MIT
config BOARD_BLUEMICRO52840_V1
bool "BlueMicro52840_V1"
depends on SOC_NRF52840_QIAA

30
app/boards/arm/bluemicro52840_v1/Kconfig.defconfig

@ -0,0 +1,30 @@
# Electronut Labs Papyr board configuration
# Copyright (c) 2020 Pete Johanson, Derek Schmell
# SPDX-License-Identifier: MIT
if BOARD_BLUEMICRO52840_V1
config BOARD
default "bluemicro52840_v1"
if USB
config USB_NRFX
default y
config USB_DEVICE_STACK
default y
endif # USB
config BT_CTLR
default BT
config ZMK_BLE
default y
config ZMK_USB
default y
endif # BOARD_BLUEMICRO52840_V1

52
app/boards/arm/bluemicro52840_v1/arduino_pro_micro_pins.dtsi

@ -0,0 +1,52 @@
/*
* Copyright (c) 2020 Pete Johanson
*
* SPDX-License-Identifier: MIT
*/
/ {
pro_micro_d: connector_d {
compatible = "arduino-pro-micro";
#gpio-cells = <2>;
gpio-map-mask = <0xffffffff 0xffffffc0>;
gpio-map-pass-thru = <0 0x3f>;
gpio-map
= <0 0 &gpio0 8 0> /* D0 D2 */
, <1 0 &gpio0 6 0> /* D1 D3*/
, <2 0 &gpio0 15 0> /* D2 D1*/
, <3 0 &gpio0 17 0> /* D3 D0*/
, <4 0 &gpio0 20 0> /* D4/A6 D4*/
, <5 0 &gpio0 13 0> /* D5 C6*/
, <6 0 &gpio0 24 0> /* D6/A7 D7*/
, <7 0 &gpio0 9 0> /* D7 E6*/
, <8 0 &gpio0 10 0> /* D8/A8 B4*/
, <9 0 &gpio1 6 0> /* D9/A9 B5*/
, <10 0 &gpio1 11 0> /* D10/A10 B6*/
, <16 0 &gpio0 28 0> /* D16 B2*/
, <14 0 &gpio0 3 0> /* D14 B3*/
, <15 0 &gpio1 13 0> /* D15 B1*/
;
};
pro_micro_a: connector_a {
compatible = "arduino-pro-micro";
#gpio-cells = <2>;
gpio-map-mask = <0xffffffff 0xffffffc0>;
gpio-map-pass-thru = <0 0x3f>;
gpio-map
= <0 0 &gpio0 2 0> /* A0 F7*/
, <1 0 &gpio0 29 0> /* A1 F6*/
, <2 0 &gpio0 26 0> /* A2 F5*/
, <3 0 &gpio0 30 0> /* A3 F4*/
, <6 0 &gpio0 20 0> /* D4/A6 D4*/
, <7 0 &gpio0 24 0> /* D6/A7 D7*/
, <8 0 &gpio0 10 0> /* D8/A8 B4*/
, <9 0 &gpio1 6 0> /* D9/A9 B5*/
, <10 0 &gpio1 13 0> /* D10/A10 B6*/
;
};
};
pro_micro_i2c: &i2c0 {};
pro_micro_spi: &spi0 {};
pro_micro_serial: &uart0 {};

103
app/boards/arm/bluemicro52840_v1/bluemicro52840_v1.dts

@ -0,0 +1,103 @@
/*
* Copyright (c) 2020 Pete Johanson, Derek Schmell
*
* SPDX-License-Identifier: MIT
*/
/dts-v1/;
#include <nordic/nrf52840_qiaa.dtsi>
#include "arduino_pro_micro_pins.dtsi"
/ {
model = "BlueMicro52840_V1";
compatible = "bluemicro52840,v1";
chosen {
zephyr,code-partition = &code_partition;
// zephyr,console = &uart0;
//zephyr,bt-mon-uart = &uart0;
//zephyr,bt-c2h-uart = &uart0;
zephyr,sram = &sram0;
zephyr,flash = &flash0;
};
leds {
compatible = "gpio-leds";
blue_led: led_0 {
gpios = <&gpio0 42 GPIO_ACTIVE_LOW>;
label = "Blue LED";
};
};
};
&gpio0 {
status = "okay";
};
&gpio1 {
status = "okay";
};
&uart0 {
compatible = "nordic,nrf-uart";
current-speed = <115200>;
tx-pin = <6>;
rx-pin = <8>;
};
&i2c0 {
compatible = "nordic,nrf-twi";
sda-pin = <25>;
scl-pin = <26>;
};
&uart0 {
compatible = "nordic,nrf-uarte";
status = "okay";
current-speed = <115200>;
tx-pin = <39>;
rx-pin = <34>;
rts-pin = <33>;
cts-pin = <12>;
};
&usbd {
status = "okay";
};
&flash0 {
/*
* For more information, see:
* http://docs.zephyrproject.org/latest/devices/dts/flash_partitions.html
*/
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
boot_partition: partition@0 {
label = "adafruit_boot";
reg = <0x000000000 0x0000C000>;
};
code_partition: partition@26000 {
label = "code_partition";
reg = <0x00026000 0x000d2000>;
};
/*
* The flash starting at 0x000f8000 and ending at
* 0x000fffff is reserved for use by the application.
*/
/*
* Storage partition will be used by FCB/LittleFS/NVS
* if enabled.
*/
storage_partition: partition@f8000 {
label = "storage";
reg = <0x000f8000 0x00008000>;
};
};
};

15
app/boards/arm/bluemicro52840_v1/bluemicro52840_v1.yaml

@ -0,0 +1,15 @@
identifier: bluemicro52840_v1
name: BlueMicro52840_V1
type: mcu
arch: arm
toolchain:
- zephyr
- gnuarmemb
- xtools
supported:
- adc
- usb_device
- ble
- ieee802154
- pwm
- watchdog

20
app/boards/arm/bluemicro52840_v1/bluemicro52840_v1_defconfig

@ -0,0 +1,20 @@
# SPDX-License-Identifier: MIT
CONFIG_SOC_SERIES_NRF52X=y
CONFIG_SOC_NRF52840_QIAA=y
CONFIG_BOARD_BLUEMICRO52840_V1=y
# Enable MPU
CONFIG_ARM_MPU=y
# enable GPIO
CONFIG_GPIO=y
CONFIG_USE_DT_CODE_PARTITION=y
CONFIG_MPU_ALLOW_FLASH_WRITE=y
CONFIG_NVS=y
CONFIG_SETTINGS_NVS=y
CONFIG_FLASH=y
CONFIG_FLASH_PAGE_LAYOUT=y
CONFIG_FLASH_MAP=y

5
app/boards/arm/bluemicro52840_v1/board.cmake

@ -0,0 +1,5 @@
# SPDX-License-Identifier: Apache-2.0
board_runner_args(nrfjprog "--nrf-family=NRF52" "--softreset")
include(${ZEPHYR_BASE}/boards/common/blackmagicprobe.board.cmake)
include(${ZEPHYR_BASE}/boards/common/nrfjprog.board.cmake)
Loading…
Cancel
Save