Add Reviung41 Shield Definitions

.github/workflows/build.yml

@@ -18,6 +18,7 @@ jobs:
           - lily58_right
           - iris_left
           - iris_right
+          - reviung41
           - romac
           - romac_plus
           - settings_reset

app/boards/shields/reviung41/Kconfig.defconfig

@@ -0,0 +1,9 @@
+# Copyright (c) 2020 The ZMK Contributors
+# SPDX-License-Identifier: MIT
+
+if SHIELD_REVIUNG41
+
+config ZMK_KEYBOARD_NAME
+    default "Reviung41"
+
+endif

app/boards/shields/reviung41/Kconfig.shield

@@ -0,0 +1,5 @@
+# Copyright (c) 2020 The ZMK Contributors
+# SPDX-License-Identifier: MIT
+
+config SHIELD_REVIUNG41
+    def_bool $(shields_list_contains,reviung41)

app/boards/shields/reviung41/boards/nice_nano.overlay

@@ -0,0 +1,28 @@
+&spi1 {
+	compatible = "nordic,nrf-spi";
+	status = "okay";
+	mosi-pin = <6>;
+	// Unused pins, needed for SPI definition, but not used by the ws2812 driver itself.
+	sck-pin = <5>;
+	miso-pin = <7>;
+
+	led_strip: ws2812@0 {
+		compatible = "worldsemi,ws2812-spi";
+		label = "WS2812";
+
+		/* SPI */
+		reg = <0>; /* ignored, but necessary for SPI bindings */
+		spi-max-frequency = <4000000>;
+
+		/* WS2812 */
+		chain-length = <11>; /* arbitrary; change at will */
+		spi-one-frame = <0x70>;
+		spi-zero-frame = <0x40>;
+	};
+};
+
+/ {
+	chosen {
+		zmk,underglow = &led_strip;
+	};
+};

app/boards/shields/reviung41/reviung41.conf

@@ -0,0 +1,3 @@
+# Uncomment the following lines to enable RGB underglow
+# CONFIG_ZMK_RGB_UNDERGLOW=y
+# CONFIG_WS2812_STRIP=y

app/boards/shields/reviung41/reviung41.keymap

@@ -0,0 +1,72 @@
+/*
+ * Copyright (c) 2020 The ZMK Contributors
+ *
+ * SPDX-License-Identifier: MIT
+ */
+
+#include <behaviors.dtsi>
+#include <dt-bindings/zmk/keys.h>
+#include <dt-bindings/zmk/bt.h>
+#include <dt-bindings/zmk/rgb.h>
+
+/ {
+        keymap {
+                compatible = "zmk,keymap";
+
+                default_layer {
+// -------------------------------------------------------------------------------------
+// |  TAB |  Q  |  W  |  E  |  R  |  T  |   |  Y  |  U   |  I  |  O  |  P  |   BKSP    |
+// | CTRL |  A  |  S  |  D  |  F  |  G  |   |  H  |  J   |  K  |  L  |  ;  |    '      |
+// | SHFT |  Z  |  X  |  C  |  V  |  B  |   |  N  |  M   |  ,  |  .  |  /  | SHFT(RET) |
+//                         | ALT | LWR | SPC | RSE  | ALT |
+                        bindings = <
+   &kp TAB  &kp Q &kp W &kp E &kp R &kp T   &kp Y &kp U  &kp I    &kp O   &kp P    &kp BKSP
+   &kp LCTL &kp A &kp S &kp D &kp F &kp G   &kp H &kp J  &kp K    &kp L   &kp SCLN &kp QUOT
+   &kp LSFT &kp Z &kp X &kp C &kp V &kp B   &kp N &kp M  &kp CMMA &kp DOT &kp FSLH &mt RSFT RET
+                        &kp LALT  &mo 1 &kp SPC  &mo 2  &kp RALT
+                        >;
+                };
+
+                lower_layer {
+// ----------------------------------------------------------------------------------
+// |    |  !  |  @  |  #  |  $  |  %  |   |  ^  |  &  |  *  |  (  |  )  |    DEL    |
+// |    |  _  |  +  |  {  |  }  | "|" |   | LFT | DWN |  UP | RGT |  `  |     ~     |
+// |    | ESC | GUI | ALT | CAPS|  "  |   | HOME| END | PGUP| PGDN| PRSC| SHFT(RET) |
+//                       |     |     | RET | ADJ |     |
+                        bindings = <
+   &trans &kp BANG  &kp ATSN &kp HASH &kp CURU &kp PRCT      &kp CRRT &kp AMPS &kp NUM_8 &kp LPRN &kp RPRN &kp DEL
+   &trans &kp MINUS &kp KPLS &kp LCUR &kp RCUR &kp PIPE      &kp LARW &kp DARW &kp UARW  &kp RARW &kp GRAV &kp GRAV
+   &trans &kp ESC   &kp LGUI &kp LALT &kp CLCK &kp QUOT      &kp HOME &kp END  &kp PGUP  &kp PGDN &kp PRSC &mt RSFT RET
+                              &trans      &trans       &kp RET        &mo 3       &trans
+                        >;
+                };
+
+                raise_layer {
+// -----------------------------------------------------------------------------------------
+// |    |  1  |  2  |  3  |  4  |  5  |   |  6  |  7  |  8  |  9  |  0  | DEL |
+// |    |  -  |  =  |  [  |  ]  |  \  |   | F1  | F2  | F3  | F4  | F5  | F6  |
+// |    | ESC | GUI | ALT | CAPS|  "  |   | F7  | F8  | F9  | F10 | F11 | F12 |
+//                       |     | ADJ | BKSP |    |     |
+                        bindings = <
+   &trans &kp NUM_1 &kp NUM_2 &kp NUM_3 &kp NUM_4 &kp NUM_5     &kp NUM_6 &kp NUM_7 &kp NUM_8 &kp NUM_9 &kp NUM_0 &kp DEL
+   &trans &kp MINUS &kp EQL   &kp LBKT  &kp RBKT  &kp BSLH      &kp F1    &kp F2    &kp F3    &kp F4    &kp F5    &kp F6
+   &trans &kp ESC   &kp LGUI  &kp RALT  &kp CLCK  &kp QUOT      &kp F7    &kp F8    &kp F9    &kp F10   &kp F11   &kp F12
+                                &trans      &mo 3       &kp BKSP        &trans      &trans
+                        >;
+                };
+
+                adjust_layer {
+// -----------------------------------------------------------------------------------------
+// | RGB BRI+ | RGB SAT+ | RGB HUE+ | RGB ANI+ |    | RGB TOG |   |  BT1  | BT2 | BT3 | BT4 | BT5 | BT CLR |
+// | RGB BRI- | RGB SAT- | RGB HUE- | RGB ANI+ |    |         |   |       |     |     |     |     |        |
+// |          |          |          |          |    |         |   | RESET |     |     |     |     |        |
+//                                              |     |     |     |     |     |
+                        bindings = <
+   &rgb_ug RGB_BRI &rgb_ug RGB_SAI &rgb_ug RGB_HUI &rgb_ug RGB_EFF &none &rgb_ug RGB_TOG    &bt BT_SEL 0 &bt BT_SEL 1 &bt BT_SEL 2 &bt BT_SEL 3 &bt BT_SEL 4 &bt BT_CLR
+   &rgb_ug RGB_BRD &rgb_ug RGB_SAD &rgb_ug RGB_HUD &rgb_ug RGB_EFR &none &none              &none        &none        &none        &none        &none        &none
+   &none           &none           &none           &none           &none &none              &reset       &none        &none        &none        &none        &none 
+                                                             &trans      &trans       &tog 3        &trans      &trans
+                        >;
+                };
+        };
+};

app/boards/shields/reviung41/reviung41.overlay

@@ -0,0 +1,52 @@
+/*
+ * Copyright (c) 2020 The ZMK Contributors
+ *
+ * SPDX-License-Identifier: MIT
+ */
+
+#include <dt-bindings/zmk/matrix-transform.h>
+
+/ {
+    chosen {
+        zmk,kscan = &kscan0;
+        zmk,matrix_transform = &default_transform;
+    };
+
+    default_transform: keymap_transform_0 {
+        compatible = "zmk,matrix-transform";
+        columns = <6>;
+        rows = <7>;
+
+        map = <
+RC(0,0) RC(0,1) RC(0,2) RC(0,3) RC(0,4) RC(0,5) RC(3,0) RC(3,1) RC(3,2) RC(3,3) RC(3,4) RC(3,5)
+RC(1,0) RC(1,1) RC(1,2) RC(1,3) RC(1,4) RC(1,5) RC(4,0) RC(4,1) RC(4,2) RC(4,3) RC(4,4) RC(4,5)
+RC(2,0) RC(2,1) RC(2,2) RC(2,3) RC(2,4) RC(2,5) RC(5,0) RC(5,1) RC(5,2) RC(5,3) RC(5,4) RC(5,5)
+                        RC(6,0)    RC(6,1)  RC(6,2)  RC(6,3)    RC(6,4)
+        >;
+    };
+
+    kscan0: kscan_0 {
+        compatible = "zmk,kscan-gpio-matrix";
+        label = "KSCAN";
+        diode-direction = "col2row";
+
+        col-gpios
+            = <&pro_micro_d 4 GPIO_ACTIVE_HIGH>
+            , <&pro_micro_d 5 GPIO_ACTIVE_HIGH>
+            , <&pro_micro_d 6 GPIO_ACTIVE_HIGH>
+            , <&pro_micro_d 7 GPIO_ACTIVE_HIGH>
+            , <&pro_micro_d 8 GPIO_ACTIVE_HIGH>
+            , <&pro_micro_d 9 GPIO_ACTIVE_HIGH>
+            ;
+
+        row-gpios
+            = <&pro_micro_a 3 (GPIO_ACTIVE_HIGH | GPIO_PULL_DOWN)>
+            , <&pro_micro_a 2 (GPIO_ACTIVE_HIGH | GPIO_PULL_DOWN)>
+            , <&pro_micro_a 1 (GPIO_ACTIVE_HIGH | GPIO_PULL_DOWN)>
+            , <&pro_micro_a 0 (GPIO_ACTIVE_HIGH | GPIO_PULL_DOWN)>
+            , <&pro_micro_d 15 (GPIO_ACTIVE_HIGH | GPIO_PULL_DOWN)>
+            , <&pro_micro_d 14 (GPIO_ACTIVE_HIGH | GPIO_PULL_DOWN)>
+            , <&pro_micro_d 16 (GPIO_ACTIVE_HIGH | GPIO_PULL_DOWN)>
+            ;
+    };
+};

docs/docs/hardware.md

@@ -28,6 +28,7 @@ That being said, there are currently only a few specific [boards](/docs/faq#what
 - [Lily58](https://github.com/kata0510/Lily58) (`lily58_left` and `lily58_right`)
 - [Sofle](https://github.com/josefadamcik/SofleKeyboard) (`sofle_left` and `sofle_right`)
 - [Splitreus62](https://github.com/Na-Cly/splitreus62) (`splitreus62_left` and `splitreus62_right`)
+- [Reviung41](https://github.com/gtips/reviung/tree/master/reviung41) (`reviung41`)
 - [RoMac+ v4](https://www.littlekeyboards.com/products/romac) (`romac_plus`)
 - [RoMac v2](https://mechboards.co.uk/shop/kits/romac-macro-pad/) (`romac`)
 - [QAZ](https://www.cbkbd.com/product/qaz-keyboard-kit) (`qaz`)

docs/static/setup.ps1

@@ -91,9 +91,9 @@ Write-Host "Keyboard Shield Selection:"
 $prompt = "Pick a keyboard"
 
 # TODO: Add support for "Other" and linking to docs on adding custom shields in user config repos.
-$options = "Kyria", "Lily58", "Corne", "Splitreus62", "Sofle", "Iris", "RoMac", "RoMac+", "makerdiary M60", "Microdox", "TG4X", "QAZ"
+$options = "Kyria", "Lily58", "Corne", "Splitreus62", "Sofle", "Iris", "Reviung41", "RoMac", "RoMac+", "makerdiary M60", "Microdox", "TG4X", "QAZ"
-$names = "kyria", "lily58", "corne", "splitreus62", "sofle", "iris", "romac", "romac_plus", "m60", "microdox", "tg4x", "qaz"
+$names = "kyria", "lily58", "corne", "splitreus62", "sofle", "iris", "reviung41", "romac", "romac_plus", "m60", "microdox", "tg4x", "qaz"
-$splits = "y", "y", "y", "y", "y", "y", "n", "n", "n", "y", "n", "n"
+$splits = "y", "y", "y", "y", "y", "y", "n", "n", "n", "n", "y", "n", "n"
 
 $choice = Get-Choice-From-Options -Options $options -Prompt $prompt
 $shield_title = $($options[$choice])

docs/static/setup.sh

@@ -58,7 +58,7 @@ echo ""
 echo "Keyboard Shield Selection:"
 
 prompt="Pick an keyboard:"
-options=("Kyria" "Lily58" "Corne" "Splitreus62" "Sofle" "Iris" "RoMac" "RoMac+" "makerdiary M60" "Microdox" "TG4X" "QAZ")
+options=("Kyria" "Lily58" "Corne" "Splitreus62" "Sofle" "Iris" "Reviung41" "RoMac" "RoMac+" "makerdiary M60" "Microdox" "TG4X" "QAZ")
 
 PS3="$prompt "
 # TODO: Add support for "Other" and linking to docs on adding custom shields in user config repos.
@@ -73,12 +73,13 @@ select opt in "${options[@]}" "Quit"; do
     4 ) shield_title="Splitreus62" shield="splitreus62"; split="y"; break;;
     5 ) shield_title="Sofle" shield="sofle"; split="y"; break;;
     6 ) shield_title="Iris" shield="iris"; split="y"; break;;
-    7 ) shield_title="RoMac" shield="romac"; split="n"; break;;
+    7 ) shield_title="Reviung41" shield="reviung41"; split="n"; break;;
-    8 ) shield_title="RoMac+" shield="romac_plus"; split="n"; break;;
+    8 ) shield_title="RoMac" shield="romac"; split="n"; break;;
-    9 ) shield_title="M60" shield="m60"; split="n"; break;;
+    9 ) shield_title="RoMac+" shield="romac_plus"; split="n"; break;;
-    10 ) shield_title="Microdox" shield="microdox"; split="y"; break;;
+    10 ) shield_title="M60" shield="m60"; split="n"; break;;
-    11 ) shield_title="TG4X" shield="tg4x"; split="n"; break;;
+    11 ) shield_title="Microdox" shield="microdox"; split="y"; break;;
-    12 ) shield_title="QAZ" shield="qaz"; split="n"; break;;
+    12 ) shield_title="TG4X" shield="tg4x"; split="n"; break;;
+    13 ) shield_title="QAZ" shield="qaz"; split="n"; break;;
 
     # Add link to docs on adding your own custom shield in your ZMK config!
     # $(( ${#options[@]}+1 )) ) echo "Other!"; break;;