Finish DZ60RGB board definition

app/boards/arm/dz60rgb/CMakeLists.txt

@@ -1,7 +1,5 @@
 # SPDX-License-Identifier: MIT
 
-list(APPEND EXTRA_DTC_FLAGS "-qq")
-
 if(CONFIG_PINMUX)
 zephyr_library()
 zephyr_library_sources(pinmux.c)

app/boards/arm/dz60rgb/board.cmake

@@ -1,6 +1,7 @@
 # SPDX-License-Identifier: MIT
 
-board_runner_args(jlink "--device=STM32F303VC" "--speed=4000")
+board_runner_args(dfu-util "--pid=0483:df11" "--alt=0" "--dfuse")
+board_runner_args(jlink "--device=STM32F303CC" "--speed=4000")
 
 include(${ZEPHYR_BASE}/boards/common/openocd.board.cmake)
 include(${ZEPHYR_BASE}/boards/common/jlink.board.cmake)

app/boards/arm/dz60rgb/dz60rgb_rev1.dts

@@ -17,6 +17,7 @@
 		zephyr,sram = &sram0;
 		zephyr,flash = &flash0;
 		zmk,kscan = &kscan0;
+		zmk,matrix_transform = &default_transform;
 	};
 
 	default_transform: keymap_transform_0 {
@@ -28,7 +29,7 @@ RC(0,0) RC(0,1) RC(0,2) RC(0,3) RC(0,4) RC(0,5) RC(0,6) RC(0,7) RC(0,8) RC(0,9)
 RC(1,0)   RC(1,1) RC(1,2) RC(1,3) RC(1,4) RC(1,5) RC(1,6) RC(1,7) RC(1,8) RC(1,9) RC(1,10) RC(1,11) RC(1,12)   RC(1,13)
 RC(2,0)     RC(2,1) RC(2,2) RC(2,3) RC(2,4) RC(2,5) RC(2,6) RC(2,7) RC(2,8) RC(2,9) RC(2,10) RC(2,11)          RC(2,13)
 RC(3,0)       RC(3,1) RC(3,2) RC(3,3) RC(3,4) RC(3,5) RC(3,6) RC(3,7) RC(3,8) RC(3,9)    RC(3,10)     RC(3,11) RC(3,13)
-RC(4,0)   RC(4,1)   RC(4,2)                      RC(4,5)                    RC(4,9) RC(4,10) RC(4,11) RC(4,12) RC(4,13)
+RC(4,0)   RC(4,1)   RC(4,2)                      RC(4,5)                     RC(4,8) RC(4,9) RC(4,10) RC(4,11) RC(4,13)
 		>;
 	};
 
@@ -55,7 +56,7 @@ RC(4,0)   RC(4,1)   RC(4,2)                      RC(4,5)                    RC(4
 			, <&gpiob 3  GPIO_ACTIVE_HIGH>
 			, <&gpiob 4  GPIO_ACTIVE_HIGH>
 			, <&gpiob 5  GPIO_ACTIVE_HIGH>
-			, <&gpiob 6  GPIO_ACTIVE_HIGH>
+			, <&gpiob 8  GPIO_ACTIVE_HIGH>
 			, <&gpiob 9  GPIO_ACTIVE_HIGH>
 			, <&gpioc 13 GPIO_ACTIVE_HIGH>
 			, <&gpioc 14 GPIO_ACTIVE_HIGH>

app/boards/arm/dz60rgb/dz60rgb_rev1.keymap

@@ -1,23 +1,11 @@
 #include <behaviors.dtsi>
 #include <dt-bindings/zmk/keys.h>
-#include <dt-bindings/zmk/matrix-transform.h>
 
 / {
-	chosen {
-		zmk,keymap = &keymap0;
-	};
-	
-	keymap0: keymap {
+	keymap {
 		compatible = "zmk,keymap";
-		label ="Default DZ60RGB Keymap";
-		layers = <&default>;
-	};
-
-	layers {
-		compatible = "zmk,layers";
 
-		default: layer_0 {
-			label = "DEFAULT";
+		default_layer {
 // ------------------------------------------------------------------------------------------
 // | ESC |  1  |  2  |  3  |  4  |  5  |  6  |  7  |  8  |  9  |  0  |  -  |  =  |   BKSP   |
 // | TAB  |  Q  |  W  |  E  |  R  |  T  |  Y  |  U  |  I  |  O  |  P  |  [  |  ]  |   "|"   |

app/boards/arm/dz60rgb/dz60rgb_rev1_defconfig

@@ -19,9 +19,6 @@ CONFIG_CLOCK_STM32_HSE_CLOCK=8000000
 CONFIG_CLOCK_STM32_SYSCLK_SRC_PLL=y
 # use HSE as PLL input
 CONFIG_CLOCK_STM32_PLL_SRC_HSE=y
-# however, the board does not have an external oscillator, so just use
-# the 8MHz clock signal coming from integrated STLink
-CONFIG_CLOCK_STM32_HSE_BYPASS=y
 # produce 72MHz clock at PLL output
 CONFIG_CLOCK_STM32_PLL_PREDIV=1
 CONFIG_CLOCK_STM32_PLL_MULTIPLIER=9

app/boards/arm/dz60rgb/pinmux.c

@@ -14,46 +14,46 @@
 
 /* pin assignments for STM32F3DISCOVERY board */
 static const struct pin_config pinconf[] = {
-#ifdef CONFIG_UART_1
+#if DT_NODE_HAS_STATUS(DT_NODELABEL(usart1), okay) && CONFIG_SERIAL
 	{STM32_PIN_PC4, STM32F3_PINMUX_FUNC_PC4_USART1_TX},
 	{STM32_PIN_PC5, STM32F3_PINMUX_FUNC_PC5_USART1_RX},
-#endif /* CONFIG_UART_1 */
-#ifdef CONFIG_UART_2
+#endif
+#if DT_NODE_HAS_STATUS(DT_NODELABEL(usart2), okay) && CONFIG_SERIAL
 	{STM32_PIN_PA2, STM32F3_PINMUX_FUNC_PA2_USART2_TX},
 	{STM32_PIN_PA3, STM32F3_PINMUX_FUNC_PA3_USART2_RX},
-#endif /* CONFIG_UART_2 */
-#ifdef CONFIG_I2C_1
+#endif
+#if DT_NODE_HAS_STATUS(DT_NODELABEL(i2c1), okay) && CONFIG_I2C
 	{STM32_PIN_PB6, STM32F3_PINMUX_FUNC_PB6_I2C1_SCL},
 	{STM32_PIN_PB7, STM32F3_PINMUX_FUNC_PB7_I2C1_SDA},
-#endif /* CONFIG_I2C_1 */
-#ifdef CONFIG_I2C_2
+#endif
+#if DT_NODE_HAS_STATUS(DT_NODELABEL(i2c2), okay) && CONFIG_I2C
 	{STM32_PIN_PA9, STM32F3_PINMUX_FUNC_PA9_I2C2_SCL},
 	{STM32_PIN_PA10, STM32F3_PINMUX_FUNC_PA10_I2C2_SDA},
-#endif /* CONFIG_I2C_2 */
-#ifdef CONFIG_SPI_1
+#endif
+#if DT_NODE_HAS_STATUS(DT_NODELABEL(spi1), okay) && CONFIG_SPI
 #ifdef CONFIG_SPI_STM32_USE_HW_SS
 	{STM32_PIN_PA4, STM32F3_PINMUX_FUNC_PA4_SPI1_NSS},
 #endif /* CONFIG_SPI_STM32_USE_HW_SS */
 	{STM32_PIN_PA5, STM32F3_PINMUX_FUNC_PA5_SPI1_SCK},
 	{STM32_PIN_PA6, STM32F3_PINMUX_FUNC_PA6_SPI1_MISO},
 	{STM32_PIN_PA7, STM32F3_PINMUX_FUNC_PA7_SPI1_MOSI},
-#endif /* CONFIG_SPI_1 */
-#ifdef CONFIG_SPI_2
+#endif
+#if DT_NODE_HAS_STATUS(DT_NODELABEL(spi2), okay) && CONFIG_SPI
 #ifdef CONFIG_SPI_STM32_USE_HW_SS
 	{STM32_PIN_PB12, STM32F3_PINMUX_FUNC_PB12_SPI2_NSS},
 #endif /* CONFIG_SPI_STM32_USE_HW_SS */
 	{STM32_PIN_PB13, STM32F3_PINMUX_FUNC_PB13_SPI2_SCK},
 	{STM32_PIN_PB14, STM32F3_PINMUX_FUNC_PB14_SPI2_MISO},
 	{STM32_PIN_PB15, STM32F3_PINMUX_FUNC_PB15_SPI2_MOSI},
-#endif /* CONFIG_SPI_2 */
+#endif
 #ifdef CONFIG_USB_DC_STM32
 	{STM32_PIN_PA11, STM32F3_PINMUX_FUNC_PA11_USB_DM},
 	{STM32_PIN_PA12, STM32F3_PINMUX_FUNC_PA12_USB_DP},
-#endif /* CONFIG_USB_DC_STM32 */
-#ifdef CONFIG_CAN_1
+#endif	/* CONFIG_USB_DC_STM32 */
+#if DT_NODE_HAS_STATUS(DT_NODELABEL(can1), okay) && CONFIG_CAN
 	{STM32_PIN_PD0, STM32F3_PINMUX_FUNC_PD0_CAN1_RX},
 	{STM32_PIN_PD1, STM32F3_PINMUX_FUNC_PD1_CAN1_TX},
-#endif /* CONFIG_CAN_1 */
+#endif
 };
 
 static int pinmux_stm32_init(struct device *port)
@@ -66,4 +66,4 @@ static int pinmux_stm32_init(struct device *port)
 }
 
 SYS_INIT(pinmux_stm32_init, PRE_KERNEL_1,
-		 CONFIG_PINMUX_STM32_DEVICE_INITIALIZATION_PRIORITY);
+		CONFIG_PINMUX_STM32_DEVICE_INITIALIZATION_PRIORITY);