Jorne shield

.github/workflows/build.yml

@@ -25,6 +25,8 @@ jobs:
           - lily58_right
           - iris_left
           - iris_right
+          - jorne_left
+          - jorne_right
           - reviung41
           - romac
           - romac_plus

app/boards/shields/jorne/Kconfig.defconfig

@@ -0,0 +1,58 @@
+
+if SHIELD_JORNE_LEFT
+
+config ZMK_KEYBOARD_NAME
+	default "Jorne Left"
+
+endif
+
+
+if SHIELD_JORNE_RIGHT
+
+config ZMK_KEYBOARD_NAME
+	default "Jorne Right"
+
+endif
+
+if SHIELD_JORNE_LEFT || SHIELD_JORNE_RIGHT
+
+config ZMK_SPLIT
+	default y
+ 
+if ZMK_DISPLAY
+
+config I2C
+	default y
+
+config SSD1306
+	default y
+
+config SSD1306_REVERSE_MODE
+	default y
+
+endif # ZMK_DISPLAY
+
+if LVGL
+
+config LVGL_HOR_RES
+	default 128
+
+config LVGL_VER_RES
+	default 32
+
+config LVGL_VDB_SIZE
+	default 64
+
+config LVGL_DPI
+	default 148
+
+config LVGL_BITS_PER_PIXEL
+	default 1
+
+choice LVGL_COLOR_DEPTH
+	default LVGL_COLOR_DEPTH_1
+endchoice
+
+endif # LVGL
+
+endif

app/boards/shields/jorne/Kconfig.shield

@@ -0,0 +1,8 @@
+# Copyright (c) 2020  The ZMK Contributors
+# SPDX-License-Identifier: MIT
+
+config SHIELD_JORNE_LEFT
+	def_bool $(shields_list_contains,jorne_left)
+
+config SHIELD_JORNE_RIGHT
+	def_bool $(shields_list_contains,jorne_right)

app/boards/shields/jorne/boards/nice_nano.overlay

@@ -0,0 +1,29 @@
+&spi1 {
+	compatible = "nordic,nrf-spim";
+	/* Cannot be used together with i2c0. */
+	status = "okay";
+	mosi-pin = <6>;
+	// Unused pins, needed for SPI definition, but not used by the ws2812 driver itself.
+	sck-pin = <5>;
+	miso-pin = <7>;
+
+	led_strip: ws2812@0 {
+		compatible = "worldsemi,ws2812-spi";
+		label = "WS2812";
+
+		/* SPI */
+		reg = <0>; /* ignored, but necessary for SPI bindings */
+		spi-max-frequency = <4000000>;
+
+		/* WS2812 */
+		chain-length = <6>; /* There are per-key RGB, but the first 6 are underglow */
+		spi-one-frame = <0x70>;
+		spi-zero-frame = <0x40>;
+	};
+};
+
+/ {
+	chosen {
+		zmk,underglow = &led_strip;
+	};
+};

app/boards/shields/jorne/jorne.conf

@@ -0,0 +1,6 @@
+# Uncomment the following lines to enable the Jorne RGB Underglow
+# CONFIG_ZMK_RGB_UNDERGLOW=y
+# CONFIG_WS2812_STRIP=y
+
+# Uncomment the following line to enable the Jorne OLED Display
+# CONFIG_ZMK_DISPLAY=y

app/boards/shields/jorne/jorne.dtsi

@@ -0,0 +1,98 @@
+/*
+ * Copyright (c) 2020  The ZMK Contributors
+ *
+ * SPDX-License-Identifier: MIT
+ */
+
+#include <dt-bindings/zmk/matrix-transform.h>
+
+/ {
+	chosen {
+		zmk,kscan = &kscan0;
+		zmk,matrix_transform = &default_transform;
+	};
+
+	default_transform: keymap_transform_0 {
+		compatible = "zmk,matrix-transform";
+		columns = <12>;
+		rows = <4>;
+// | SW0  | SW1  | SW2  | SW3  | SW4  | SW5  | SW6  |   | SW6  | SW5  | SW4  | SW3  | SW2  | SW1  | SW0  |
+// |      | SW7  | SW8  | SW9  | SW10 | SW11 | SW12 |   | SW12 | SW11 | SW10 | SW9  | SW8  | SW7  |
+// |      | SW13 | SW14 | SW15 | SW16 | SW17 | SW18 |   | SW18 | SW17 | SW16 | SW15 | SW14 | SW13 |
+//                             | SW19 | SW20 | SW21 |   | SW21 | SW20 | SW19 |
+		map = <
+    RC(3,0) RC(0,0) RC(0,1) RC(0,2) RC(0,3) RC(0,4) RC(0,5)  RC(0,6) RC(0,7) RC(0,8) RC(0,9) RC(0,10) RC(0,11) RC(3,11)
+            RC(1,0) RC(1,1) RC(1,2) RC(1,3) RC(1,4) RC(1,5)  RC(1,6) RC(1,7) RC(1,8) RC(1,9) RC(1,10) RC(1,11)
+            RC(2,0) RC(2,1) RC(2,2) RC(2,3) RC(2,4) RC(2,5)  RC(2,6) RC(2,7) RC(2,8) RC(2,9) RC(2,10) RC(2,11)
+                                    RC(3,3) RC(3,4) RC(3,5)  RC(3,6) RC(3,7) RC(3,8)
+		>;
+	};
+
+		crkbd_transform: keymap_transform_1 {
+		compatible = "zmk,matrix-transform";
+		columns = <12>;
+		rows = <4>;
+// | SW1  | SW2  | SW3  | SW4  | SW5  | SW6  |   | SW6  | SW5  | SW4  | SW3  | SW2  | SW1  |
+// | SW7  | SW8  | SW9  | SW10 | SW11 | SW12 |   | SW12 | SW11 | SW10 | SW9  | SW8  | SW7  |
+// | SW13 | SW14 | SW15 | SW16 | SW17 | SW18 |   | SW18 | SW17 | SW16 | SW15 | SW14 | SW13 |
+//                      | SW19 | SW20 | SW21 |   | SW21 | SW20 | SW19 |
+		map = <
+    RC(0,0) RC(0,1) RC(0,2) RC(0,3) RC(0,4) RC(0,5)  RC(0,6) RC(0,7) RC(0,8) RC(0,9) RC(0,10) RC(0,11)
+    RC(1,0) RC(1,1) RC(1,2) RC(1,3) RC(1,4) RC(1,5)  RC(1,6) RC(1,7) RC(1,8) RC(1,9) RC(1,10) RC(1,11)
+    RC(2,0) RC(2,1) RC(2,2) RC(2,3) RC(2,4) RC(2,5)  RC(2,6) RC(2,7) RC(2,8) RC(2,9) RC(2,10) RC(2,11)
+                            RC(3,3) RC(3,4) RC(3,5)  RC(3,6) RC(3,7) RC(3,8)
+		>;
+	};
+
+	five_column_transform: keymap_transform_2 {
+		compatible = "zmk,matrix-transform";
+		columns = <10>;
+		rows = <4>;
+// | SW2  | SW3  | SW4  | SW5  | SW6  |   | SW6  | SW5  | SW4  | SW3  | SW2  |
+// | SW8  | SW9  | SW10 | SW11 | SW12 |   | SW12 | SW11 | SW10 | SW9  | SW8  |
+// | SW14 | SW15 | SW16 | SW17 | SW18 |   | SW18 | SW17 | SW16 | SW15 | SW14 |
+//               | SW19 | SW20 | SW21 |   | SW21 | SW20 | SW19 |
+		map = <
+RC(0,1) RC(0,2) RC(0,3) RC(0,4) RC(0,5)  RC(0,6) RC(0,7) RC(0,8) RC(0,9) RC(0,10)
+RC(1,1) RC(1,2) RC(1,3) RC(1,4) RC(1,5)  RC(1,6) RC(1,7) RC(1,8) RC(1,9) RC(1,10)
+RC(2,1) RC(2,2) RC(2,3) RC(2,4) RC(2,5)  RC(2,6) RC(2,7) RC(2,8) RC(2,9) RC(2,10)
+                        RC(3,3) RC(3,4) RC(3,5)  RC(3,6) RC(3,7) RC(3,8)
+		>;
+	};
+
+	kscan0: kscan {
+		compatible = "zmk,kscan-gpio-matrix";
+		label = "KSCAN";
+
+		diode-direction = "col2row";
+		row-gpios
+			= <&pro_micro_d 4 (GPIO_ACTIVE_HIGH | GPIO_PULL_DOWN)>
+			, <&pro_micro_d 5 (GPIO_ACTIVE_HIGH | GPIO_PULL_DOWN)>
+			, <&pro_micro_d 6 (GPIO_ACTIVE_HIGH | GPIO_PULL_DOWN)>
+			, <&pro_micro_d 7 (GPIO_ACTIVE_HIGH | GPIO_PULL_DOWN)>
+			;
+		
+	};
+
+	// TODO: per-key RGB node(s)?
+};
+
+&pro_micro_i2c {
+	status = "okay";
+
+	oled: ssd1306@3c {
+		compatible = "solomon,ssd1306fb";
+		reg = <0x3c>;
+		label = "DISPLAY";
+		width = <128>;
+		height = <32>;
+		segment-offset = <0>;
+		page-offset = <0>;
+		display-offset = <0>;
+		multiplex-ratio = <31>;
+		segment-remap;
+		com-invdir;
+		com-sequential;
+		prechargep = <0x22>;
+	};
+};

app/boards/shields/jorne/jorne.keymap

@@ -0,0 +1,74 @@
+/*
+ * Copyright (c) 2020 The ZMK Contributors
+ *
+ * SPDX-License-Identifier: MIT
+ */
+
+#include <behaviors.dtsi>
+#include <dt-bindings/zmk/keys.h>
+#include <dt-bindings/zmk/bt.h>
+
+#define DEF 0
+#define LWR 1
+#define RSE 2
+#define ADJ 3
+
+/ {
+        keymap {
+                compatible = "zmk,keymap";
+
+                default_layer {
+// -----------------------------------------------------------------------------------------
+// |  GUI |   ~  |  Q  |  W  |  E  |  R  |  T  |   |  Y  |  U   |  I  |  O  |  P  |  [   | GUI/] |
+//        | CTRL |  A  |  S  |  D  |  F  |  G  |   |  H  |  J   |  K  |  L  |  ;  |CTRL/'|
+//        | LALT |  Z  |  X  |  C  |  V  |  B  |   |  N  |  M   |  ,  |  .  |  /  | RALT |
+//                           | RSE | SPC | LWR |   | LWR | BKSP | RSE |
+                        bindings = <
+   &kp LWIN &kp GRAVE &kp Q &kp W &kp E &kp R &kp T &kp Y         &kp U  &kp I     &kp O   &kp P    &kp LBKT &mt RWIN RBKT
+            &kp LCTRL &kp A &kp S &kp D &kp F &kp G &kp H         &kp J  &kp K     &kp L   &kp SCLN &mt RCTRL QUOT
+            &kp LALT  &kp Z &kp X &kp C &kp V &kp B &kp N         &kp M  &kp COMMA &kp DOT &kp FSLH &kp BSLH
+                         &lt RSE TAB &mt LSHFT SPC &lt LWR RET  &lt LWR ESC &mt RSHFT BSPC &lt RSE DEL
+                        >;
+                };
+                lower_layer {
+// -----------------------------------------------------------------------------------------
+// |     |  _  |  F1 |  F2 |  F3 |  F4 |  F5 |   |  F6 |  F7 |  F8 |  F9 | F10 | F11 | F12 |
+//       |  +  |  !  |  @  |  #  |  $  |  %  |   |  ^  |  &  |  *  |  (  |  )  |  -  |
+//       |  =  |  1  |  2  |  3  |  4  |  5  |   |  6  |  7  |  8  |  9  |  0  |     |
+//                    | GUI |     | SPC |   | ENT |     | ALT |
+                        bindings = <
+   &trans &kp UNDER      &kp F1   &kp F2 &kp F3   &kp F4   &kp F5           &kp F6   &kp F7   &kp F8   &kp F9   &kp F10  &kp F11 &mt RGUI F12
+          &mt LCTRL PLUS &kp EXCL &kp AT &kp HASH &kp DLLR &kp PRCNT        &kp CRRT &kp AMPS &kp STAR &kp LPAR &kp RPAR &mt RCTRL MINUS
+          &mt LALT EQUAL &kp N1   &kp N2 &kp N3   &kp N4   &kp N5           &kp N6   &kp N7   &kp N8   &kp N9   &kp N0   &trans
+                                              &lt ADJ TAB &trans &trans   &trans &trans &lt ADJ DEL
+                        >;
+                };
+
+                raise_layer {
+// -----------------------------------------------------------------------------------------
+// |     | NMLK |  /  |  7  |  8  |  9  |  -  |   | VOLU| HOME| PRSC| PGUP| SCLK| CLCK|     |
+//       | CTRL |  *  |  4  |  5  |  6  |  +  |   | MUT | LEFT|  UP | RGHT| INS | APP |
+//       |      |  0  |  1  |  2  |  3  |  .  |   | VOLD| END | DOWN| PGDN| PAUS|     |
+//                          |     |     | ADJ |   | ADJ |     |     |
+                        bindings = <
+   &trans &kp KP_NUM    &kp KP_SLASH    &kp KP_N7 &kp KP_N8 &kp KP_N9 &kp KP_MINUS        &kp C_VOL_UP &kp HOME &kp PSCRN &kp PG_UP &kp SLCK &kp CAPS &trans
+          &mt LCTRL EQL &kp KP_MULTIPLY &kp KP_N4 &kp KP_N5 &kp KP_N6 &kp KP_PLUS         &kp C_MUTE   &kp LEFT &kp UP    &kp RIGHT &kp INS  &mt RCTRL K_APP
+          &trans        &kp KP_N0       &kp KP_N1 &kp KP_N2 &kp KP_N3 &kp KP_DOT          &kp C_VOL_DN &kp END  &kp DOWN  &kp PG_DN &kp PAUS &trans
+                                                           &trans &trans &lt ADJ RET   &lt ADJ ESC &trans &trans
+                        >;
+                };
+                adjust_layer {
+// -----------------------------------------------------------------------------------------
+// | RST | BLDR |     |     |     |     |     |   |     |     |     |     |     | BLDR | RST |
+//       | BTCLR| BT0 | BT1 | BT2 | BT3 | BT4 |   | BT4 | BT3 | BT2 | BT1 | BT0 | BTCLR|
+//       |      |     |     |     |     |     |   |     |     |     |     |     |      |
+//                          |     |     |     |   |     |     |     |
+                        bindings = <
+   &reset &bootloader  &none        &none        &none        &none        &none              &none        &none        &none        &none        &none         &bootloader &reset
+          &bt BT_CLR   &bt BT_SEL 0 &bt BT_SEL 1 &bt BT_SEL 2 &bt BT_SEL 3 &bt BT_SEL 4       &bt BT_SEL 4 &bt BT_SEL 3 &bt BT_SEL 2 &bt BT_SEL 1 &bt BT_SEL 0  &bt BT_CLR
+          &none        &none        &none        &none        &none        &none              &none        &none        &none        &none        &none         &none
+                                                                    &trans &none &trans   &trans &none &trans
+                        >;
+                };
+        };
+};

app/boards/shields/jorne/jorne_left.conf

@@ -0,0 +1,2 @@
+CONFIG_ZMK_SPLIT=y
+CONFIG_ZMK_SPLIT_BLE_ROLE_CENTRAL=y

app/boards/shields/jorne/jorne_left.overlay

@@ -0,0 +1,18 @@
+/*
+ * Copyright (c) 2020  The ZMK Contributors
+ *
+ * SPDX-License-Identifier: MIT
+ */
+
+#include "jorne.dtsi"
+
+&kscan0 {
+	col-gpios
+		= <&pro_micro_a  3 GPIO_ACTIVE_HIGH>
+		, <&pro_micro_a  2 GPIO_ACTIVE_HIGH>
+		, <&pro_micro_a  1 GPIO_ACTIVE_HIGH>
+		, <&pro_micro_a  0 GPIO_ACTIVE_HIGH>
+		, <&pro_micro_d 15 GPIO_ACTIVE_HIGH>
+		, <&pro_micro_d 14 GPIO_ACTIVE_HIGH>
+		;
+};

app/boards/shields/jorne/jorne_right.conf

@@ -0,0 +1,2 @@
+CONFIG_ZMK_SPLIT=y
+CONFIG_ZMK_SPLIT_BLE_ROLE_PERIPHERAL=y

app/boards/shields/jorne/jorne_right.overlay

@@ -0,0 +1,22 @@
+/*
+ * Copyright (c) 2020  The ZMK Contributors
+ *
+ * SPDX-License-Identifier: MIT
+ */
+
+#include "jorne.dtsi"
+
+&default_transform {
+	col-offset = <6>;
+};
+
+&kscan0 {
+	col-gpios
+		= <&pro_micro_d 14 GPIO_ACTIVE_HIGH>
+		, <&pro_micro_d 15 GPIO_ACTIVE_HIGH>
+		, <&pro_micro_a  0 GPIO_ACTIVE_HIGH>
+		, <&pro_micro_a  1 GPIO_ACTIVE_HIGH>
+		, <&pro_micro_a  2 GPIO_ACTIVE_HIGH>
+		, <&pro_micro_a  3 GPIO_ACTIVE_HIGH>
+		;
+};

docs/docs/hardware.md

@@ -32,6 +32,7 @@ That being said, there are currently only a few specific [boards](/docs/faq#what
 - [RoMac v2](https://mechboards.co.uk/shop/kits/romac-macro-pad/) (`romac`)
 - [Boardsource 3x4 Macro](https://boardsource.xyz/store/5ecc2008eee64242946c98c1) (`boardsource3x4`)
 - [QAZ](https://www.cbkbd.com/product/qaz-keyboard-kit) (`qaz`)
+- [Jorne](https://github.com/joric/jorne) (`jorne`)
 
 ## Other Hardware
 

docs/static/setup.ps1

@@ -91,8 +91,8 @@ Write-Host "Keyboard Shield Selection:"
 $prompt = "Pick a keyboard"
 
 # TODO: Add support for "Other" and linking to docs on adding custom shields in user config repos.
-$options = "Kyria", "Lily58", "Corne", "Splitreus62", "Sofle", "Iris", "Reviung41", "RoMac", "RoMac+", "makerdiary M60", "Microdox", "TG4X", "QAZ", "NIBBLE"
+$options = "Kyria", "Lily58", "Corne", "Splitreus62", "Sofle", "Iris", "Reviung41", "RoMac", "RoMac+", "makerdiary M60", "Microdox", "TG4X", "QAZ", "NIBBLE", "Jorne"
-$names = "kyria", "lily58", "corne", "splitreus62", "sofle", "iris", "reviung41", "romac", "romac_plus", "m60", "microdox", "tg4x", "qaz", "nibble"
+$names = "kyria", "lily58", "corne", "splitreus62", "sofle", "iris", "reviung41", "romac", "romac_plus", "m60", "microdox", "tg4x", "qaz", "nibble", "jorne"
 $splits = "y", "y", "y", "y", "y", "y", "n", "n", "n", "n", "y", "n", "n", "n"
 
 $choice = Get-Choice-From-Options -Options $options -Prompt $prompt

docs/static/setup.sh

@@ -92,7 +92,7 @@ echo ""
 echo "Keyboard Shield Selection:"
 
 prompt="Pick an keyboard:"
-options=("Kyria" "Lily58" "Corne" "Splitreus62" "Sofle" "Iris" "Reviung41" "RoMac" "RoMac+" "makerdiary M60" "Microdox" "TG4X" "QAZ")
+options=("Kyria" "Lily58" "Corne" "Splitreus62" "Sofle" "Iris" "Reviung41" "RoMac" "RoMac+" "makerdiary M60" "Microdox" "TG4X" "QAZ" "Jorne")
 
 PS3="$prompt "
 # TODO: Add support for "Other" and linking to docs on adding custom shields in user config repos.
@@ -115,6 +115,7 @@ select opt in "${options[@]}" "Quit"; do
     12 ) shield_title="TG4X" shield="tg4x"; split="n"; break;;
     13 ) shield_title="QAZ" shield="qaz"; split="n"; break;;
     14 ) shield_title="NIBBLE" shield="nibble"; split="n"; break;;
+    15 ) shield_title="Jorne" shield="jorne"; split="y"; break;;
 
     # Add link to docs on adding your own custom shield in your ZMK config!
     # $(( ${#options[@]}+1 )) ) echo "Other!"; break;;