Browse Source

Merge pull request #1 from zmkfirmware/main

Updating Main
xmkb
Kurtis Lew 4 years ago committed by GitHub
parent
commit
36da21b8e3
No known key found for this signature in database
GPG Key ID: 4AEE18F83AFDEB23
  1. BIN
      docs/docs/assets/pro-micro/pro-micro-pins-labelled.jpg
  2. 2
      docs/docs/behavior/hold-tap.md
  3. 2
      docs/docs/dev-boards-shields-keymaps.md
  4. 4
      docs/docs/dev-guide-new-shield.md

BIN
docs/docs/assets/pro-micro/pro-micro-pins-labelled.jpg

Binary file not shown.

After

Width:  |  Height:  |  Size: 113 KiB

2
docs/docs/behavior/hold-tap.md

@ -59,4 +59,4 @@ If this config does not work for you, try the flavor "tap-preferred" and a short
If you want to use a tap-hold with a keycode from a different code page, you have to define another behavior with another "bindings" parameter.For example, if you want to use SHIFT and volume up, define the bindings like `bindings = <&kp>, <&cp>;`. Only single-argument behaviors are supported at the moment. If you want to use a tap-hold with a keycode from a different code page, you have to define another behavior with another "bindings" parameter.For example, if you want to use SHIFT and volume up, define the bindings like `bindings = <&kp>, <&cp>;`. Only single-argument behaviors are supported at the moment.
#### Note #### Note
Astute readers may notice similarities between the possible behaviors in ZMK and other firmware, such as QMK. The hold-preferred flavor works similar to the `HOLD_ON_OTHER_KEY_PRESS` setting. The 'balanced' flavor is similar to the `PERMISSIVE_HOLD` setting, and the `tap-preferred` flavor is similar to `IGNORE_MOD_TAP_INTERRUPT`. Astute readers may notice similarities between the possible behaviors in ZMK and other firmware, such as QMK. The hold-preferred flavor works similar to the `HOLD_ON_OTHER_KEY_PRESS` setting. The 'balanced' flavor is similar to the `PERMISSIVE_HOLD` setting, and the `tap-preferred` flavor is similar to `IGNORE_MOD_TAP_INTERRUPT`.

2
docs/docs/dev-boards-shields-keymaps.md

@ -35,6 +35,8 @@ in the `app/boards/${arch}/${board_name}` directory, e.g. `app/boards/arm/planck
## Pro Micro Compatible Keyboard ## Pro Micro Compatible Keyboard
![Labelled Pro Micro pins](assets/pro-micro/pro-micro-pins-labelled.jpg)
For keyboards that require a (usually Pro Micro compatible) add-on board to operate, the ZMK integration pieces are places For keyboards that require a (usually Pro Micro compatible) add-on board to operate, the ZMK integration pieces are places
in the _shield_ definition for that keyboard, allowing users to in the _shield_ definition for that keyboard, allowing users to
swap in different Pro Micro compatible boards (e.g. Proton-C, or nice!nano) and build a firmware the matches their actual swap in different Pro Micro compatible boards (e.g. Proton-C, or nice!nano) and build a firmware the matches their actual

4
docs/docs/dev-guide-new-shield.md

@ -64,6 +64,10 @@ endif
## Shield Overlay ## Shield Overlay
![Labelled Pro Micro pins](assets/pro-micro/pro-micro-pins-labelled.jpg)
ZMK uses the green color coded pin names to generate devicetree node references. For example, to refer to the node `D0` in the devicetree files, use `&pro_micro_d 0` or to refer to `A1`, use `&pro_micro_a 1`.
The `<shield_name>.overlay` is the devicetree description of the keyboard shield that is merged with the primary board devicetree description before the build. For ZMK, this file at a minimum should include the [chosen]() node named `zmk,kscan` that references a KSCAN driver instance. For a simple 3x3 macropad matrix, The `<shield_name>.overlay` is the devicetree description of the keyboard shield that is merged with the primary board devicetree description before the build. For ZMK, this file at a minimum should include the [chosen]() node named `zmk,kscan` that references a KSCAN driver instance. For a simple 3x3 macropad matrix,
this might look something like: this might look something like:

Loading…
Cancel
Save