Browse Source

Merge pull request #269 from joelspadin/endpoint-selection

feat: only send HID reports to one endpoint
xmkb
Pete Johanson 4 years ago committed by GitHub
parent
commit
2d31e1d05f
No known key found for this signature in database
GPG Key ID: 4AEE18F83AFDEB23
  1. 2
      app/CMakeLists.txt
  2. 1
      app/dts/behaviors.dtsi
  3. 9
      app/dts/behaviors/outputs.dtsi
  4. 10
      app/dts/bindings/behaviors/zmk,behavior-outputs.yaml
  5. 9
      app/include/dt-bindings/zmk/outputs.h
  6. 1
      app/include/zmk/ble.h
  7. 8
      app/include/zmk/endpoints.h
  8. 20
      app/include/zmk/events/usb-conn-state-changed.h
  9. 2
      app/include/zmk/hid.h
  10. 12
      app/include/zmk/usb.h
  11. 44
      app/src/behaviors/behavior_outputs.c
  12. 26
      app/src/ble.c
  13. 236
      app/src/endpoints.c
  14. 10
      app/src/events/usb_conn_state_changed.c
  15. 4
      app/src/hid.c
  16. 9
      app/src/power.c
  17. 29
      app/src/usb.c
  18. 59
      docs/docs/behavior/outputs.md
  19. 1
      docs/sidebars.js

2
app/CMakeLists.txt

@ -37,11 +37,13 @@ target_sources(app PRIVATE src/events/keycode_state_changed.c)
target_sources(app PRIVATE src/events/modifiers_state_changed.c) target_sources(app PRIVATE src/events/modifiers_state_changed.c)
target_sources(app PRIVATE src/events/sensor_event.c) target_sources(app PRIVATE src/events/sensor_event.c)
target_sources_ifdef(CONFIG_ZMK_BLE app PRIVATE src/events/ble_active_profile_changed.c) target_sources_ifdef(CONFIG_ZMK_BLE app PRIVATE src/events/ble_active_profile_changed.c)
target_sources_ifdef(CONFIG_USB app PRIVATE src/events/usb_conn_state_changed.c)
if (NOT CONFIG_ZMK_SPLIT_BLE_ROLE_PERIPHERAL) if (NOT CONFIG_ZMK_SPLIT_BLE_ROLE_PERIPHERAL)
target_sources(app PRIVATE src/behaviors/behavior_key_press.c) target_sources(app PRIVATE src/behaviors/behavior_key_press.c)
target_sources(app PRIVATE src/behaviors/behavior_reset.c) target_sources(app PRIVATE src/behaviors/behavior_reset.c)
target_sources(app PRIVATE src/behaviors/behavior_hold_tap.c) target_sources(app PRIVATE src/behaviors/behavior_hold_tap.c)
target_sources(app PRIVATE src/behaviors/behavior_momentary_layer.c) target_sources(app PRIVATE src/behaviors/behavior_momentary_layer.c)
target_sources(app PRIVATE src/behaviors/behavior_outputs.c)
target_sources(app PRIVATE src/behaviors/behavior_toggle_layer.c) target_sources(app PRIVATE src/behaviors/behavior_toggle_layer.c)
target_sources(app PRIVATE src/behaviors/behavior_transparent.c) target_sources(app PRIVATE src/behaviors/behavior_transparent.c)
target_sources(app PRIVATE src/behaviors/behavior_none.c) target_sources(app PRIVATE src/behaviors/behavior_none.c)

1
app/dts/behaviors.dtsi

@ -10,3 +10,4 @@
#include <behaviors/rgb_underglow.dtsi> #include <behaviors/rgb_underglow.dtsi>
#include <behaviors/bluetooth.dtsi> #include <behaviors/bluetooth.dtsi>
#include <behaviors/ext_power.dtsi> #include <behaviors/ext_power.dtsi>
#include <behaviors/outputs.dtsi>

9
app/dts/behaviors/outputs.dtsi

@ -0,0 +1,9 @@
/ {
behaviors {
out: behavior_outputs {
compatible = "zmk,behavior-outputs";
label = "OUTPUTS";
#binding-cells = <1>;
};
};
};

10
app/dts/bindings/behaviors/zmk,behavior-outputs.yaml

@ -0,0 +1,10 @@
#
# Copyright (c) 2020, The ZMK Contributors
# SPDX-License-Identifier: MIT
#
description: Output Selection Behavior
compatible: "zmk,behavior-outputs"
include: one_param.yaml

9
app/include/dt-bindings/zmk/outputs.h

@ -0,0 +1,9 @@
/*
* Copyright (c) 2020 The ZMK Contributors
*
* SPDX-License-Identifier: MIT
*/
#define OUT_TOG 0
#define OUT_USB 1
#define OUT_BLE 2

1
app/include/zmk/ble.h

@ -15,6 +15,7 @@ int zmk_ble_prof_prev();
int zmk_ble_prof_select(u8_t index); int zmk_ble_prof_select(u8_t index);
bt_addr_le_t *zmk_ble_active_profile_addr(); bt_addr_le_t *zmk_ble_active_profile_addr();
bool zmk_ble_active_profile_is_connected();
char *zmk_ble_active_profile_name(); char *zmk_ble_active_profile_name();
int zmk_ble_unpair_all(); int zmk_ble_unpair_all();

8
app/include/zmk/endpoints.h

@ -9,4 +9,12 @@
#include <zmk/keys.h> #include <zmk/keys.h>
#include <zmk/hid.h> #include <zmk/hid.h>
enum zmk_endpoint {
ZMK_ENDPOINT_USB,
ZMK_ENDPOINT_BLE,
};
int zmk_endpoints_select(enum zmk_endpoint endpoint);
int zmk_endpoints_toggle();
int zmk_endpoints_send_report(u8_t usage_report); int zmk_endpoints_send_report(u8_t usage_report);

20
app/include/zmk/events/usb-conn-state-changed.h

@ -0,0 +1,20 @@
/*
* Copyright (c) 2020 The ZMK Contributors
*
* SPDX-License-Identifier: MIT
*/
#pragma once
#include <zephyr.h>
#include <usb/usb_device.h>
#include <zmk/event-manager.h>
#include <zmk/usb.h>
struct usb_conn_state_changed {
struct zmk_event_header header;
enum zmk_usb_conn_state conn_state;
};
ZMK_EVENT_DECLARE(usb_conn_state_changed);

2
app/include/zmk/hid.h

@ -168,9 +168,11 @@ int zmk_hid_register_mods(zmk_mod_flags modifiers);
int zmk_hid_unregister_mods(zmk_mod_flags modifiers); int zmk_hid_unregister_mods(zmk_mod_flags modifiers);
int zmk_hid_keypad_press(zmk_key key); int zmk_hid_keypad_press(zmk_key key);
int zmk_hid_keypad_release(zmk_key key); int zmk_hid_keypad_release(zmk_key key);
void zmk_hid_keypad_clear();
int zmk_hid_consumer_press(zmk_key key); int zmk_hid_consumer_press(zmk_key key);
int zmk_hid_consumer_release(zmk_key key); int zmk_hid_consumer_release(zmk_key key);
void zmk_hid_consumer_clear();
struct zmk_hid_keypad_report *zmk_hid_get_keypad_report(); struct zmk_hid_keypad_report *zmk_hid_get_keypad_report();
struct zmk_hid_consumer_report *zmk_hid_get_consumer_report(); struct zmk_hid_consumer_report *zmk_hid_get_consumer_report();

12
app/include/zmk/usb.h

@ -12,8 +12,18 @@
#include <zmk/keys.h> #include <zmk/keys.h>
#include <zmk/hid.h> #include <zmk/hid.h>
enum zmk_usb_conn_state {
ZMK_USB_CONN_NONE,
ZMK_USB_CONN_POWERED,
ZMK_USB_CONN_HID,
};
enum usb_dc_status_code zmk_usb_get_status(); enum usb_dc_status_code zmk_usb_get_status();
enum zmk_usb_conn_state zmk_usb_get_conn_state();
static inline bool zmk_usb_is_powered() { return zmk_usb_get_conn_state() != ZMK_USB_CONN_NONE; }
static inline bool zmk_usb_is_hid_ready() { return zmk_usb_get_conn_state() == ZMK_USB_CONN_HID; }
#ifdef CONFIG_ZMK_USB #ifdef CONFIG_ZMK_USB
int zmk_usb_hid_send_report(u8_t *report, size_t len); int zmk_usb_hid_send_report(const u8_t *report, size_t len);
#endif /* CONFIG_ZMK_USB */ #endif /* CONFIG_ZMK_USB */

44
app/src/behaviors/behavior_outputs.c

@ -0,0 +1,44 @@
/*
* Copyright (c) 2020 The ZMK Contributors
*
* SPDX-License-Identifier: MIT
*/
#define DT_DRV_COMPAT zmk_behavior_outputs
#include <device.h>
#include <devicetree.h>
#include <drivers/behavior.h>
#include <dt-bindings/zmk/outputs.h>
#include <zmk/behavior.h>
#include <zmk/endpoints.h>
#include <logging/log.h>
LOG_MODULE_DECLARE(zmk, CONFIG_ZMK_LOG_LEVEL);
static int on_keymap_binding_pressed(struct zmk_behavior_binding *binding,
struct zmk_behavior_binding_event event) {
switch (binding->param1) {
case OUT_TOG:
return zmk_endpoints_toggle();
case OUT_USB:
return zmk_endpoints_select(ZMK_ENDPOINT_USB);
case OUT_BLE:
return zmk_endpoints_select(ZMK_ENDPOINT_BLE);
default:
LOG_ERR("Unknown output command: %d", binding->param1);
}
return -ENOTSUP;
}
static int behavior_out_init(struct device *dev) { return 0; }
static const struct behavior_driver_api behavior_outputs_driver_api = {
.binding_pressed = on_keymap_binding_pressed,
};
DEVICE_AND_API_INIT(behavior_out, DT_INST_LABEL(0), behavior_out_init, NULL, NULL, APPLICATION,
CONFIG_KERNEL_INIT_PRIORITY_DEFAULT, &behavior_outputs_driver_api);

26
app/src/ble.c

@ -94,6 +94,12 @@ static void raise_profile_changed_event() {
ZMK_EVENT_RAISE(ev); ZMK_EVENT_RAISE(ev);
} }
static void raise_profile_changed_event_callback(struct k_work *work) {
raise_profile_changed_event();
}
K_WORK_DEFINE(raise_profile_changed_event_work, raise_profile_changed_event_callback);
static bool active_profile_is_open() { static bool active_profile_is_open() {
return !bt_addr_le_cmp(&profiles[active_profile].peer, BT_ADDR_LE_ANY); return !bt_addr_le_cmp(&profiles[active_profile].peer, BT_ADDR_LE_ANY);
} }
@ -111,7 +117,7 @@ void set_profile_address(u8_t index, const bt_addr_le_t *addr) {
raise_profile_changed_event(); raise_profile_changed_event();
} }
bool active_profile_is_connected() { bool zmk_ble_active_profile_is_connected() {
struct bt_conn *conn; struct bt_conn *conn;
bt_addr_le_t *addr = zmk_ble_active_profile_addr(); bt_addr_le_t *addr = zmk_ble_active_profile_addr();
if (!bt_addr_le_cmp(addr, BT_ADDR_LE_ANY)) { if (!bt_addr_le_cmp(addr, BT_ADDR_LE_ANY)) {
@ -163,9 +169,9 @@ int update_advertising() {
struct bt_conn *conn; struct bt_conn *conn;
enum advertising_type desired_adv = ZMK_ADV_NONE; enum advertising_type desired_adv = ZMK_ADV_NONE;
if (active_profile_is_open() || !active_profile_is_connected()) { if (active_profile_is_open()) {
desired_adv = ZMK_ADV_CONN; desired_adv = ZMK_ADV_CONN;
} else if (!active_profile_is_connected()) { } else if (!zmk_ble_active_profile_is_connected()) {
desired_adv = ZMK_ADV_CONN; desired_adv = ZMK_ADV_CONN;
// Need to fix directed advertising for privacy centrals. See // Need to fix directed advertising for privacy centrals. See
// https://github.com/zephyrproject-rtos/zephyr/pull/14984 char // https://github.com/zephyrproject-rtos/zephyr/pull/14984 char
@ -327,6 +333,10 @@ static int ble_profiles_handle_set(const char *name, size_t len, settings_read_c
struct settings_handler profiles_handler = {.name = "ble", .h_set = ble_profiles_handle_set}; struct settings_handler profiles_handler = {.name = "ble", .h_set = ble_profiles_handle_set};
#endif /* IS_ENABLED(CONFIG_SETTINGS) */ #endif /* IS_ENABLED(CONFIG_SETTINGS) */
static bool is_conn_active_profile(const struct bt_conn *conn) {
return bt_addr_le_cmp(bt_conn_get_dst(conn), &profiles[active_profile].peer) == 0;
}
static void connected(struct bt_conn *conn, u8_t err) { static void connected(struct bt_conn *conn, u8_t err) {
char addr[BT_ADDR_LE_STR_LEN]; char addr[BT_ADDR_LE_STR_LEN];
bt_addr_le_to_str(bt_conn_get_dst(conn), addr, sizeof(addr)); bt_addr_le_to_str(bt_conn_get_dst(conn), addr, sizeof(addr));
@ -352,6 +362,11 @@ static void connected(struct bt_conn *conn, u8_t err) {
} }
update_advertising(); update_advertising();
if (is_conn_active_profile(conn)) {
LOG_DBG("Active profile connected");
raise_profile_changed_event();
}
} }
static void disconnected(struct bt_conn *conn, u8_t reason) { static void disconnected(struct bt_conn *conn, u8_t reason) {
@ -364,6 +379,11 @@ static void disconnected(struct bt_conn *conn, u8_t reason) {
// We need to do this in a work callback, otherwise the advertising update will still see the // We need to do this in a work callback, otherwise the advertising update will still see the
// connection for a profile as active, and not start advertising yet. // connection for a profile as active, and not start advertising yet.
k_work_submit(&update_advertising_work); k_work_submit(&update_advertising_work);
if (is_conn_active_profile(conn)) {
LOG_DBG("Active profile disconnected");
k_work_submit(&raise_profile_changed_event_work);
}
} }
static void security_changed(struct bt_conn *conn, bt_security_t level, enum bt_security_err err) { static void security_changed(struct bt_conn *conn, bt_security_t level, enum bt_security_err err) {

236
app/src/endpoints.c

@ -4,58 +4,238 @@
* SPDX-License-Identifier: MIT * SPDX-License-Identifier: MIT
*/ */
#include <init.h>
#include <settings/settings.h>
#include <zmk/ble.h>
#include <zmk/endpoints.h> #include <zmk/endpoints.h>
#include <zmk/hid.h> #include <zmk/hid.h>
#include <zmk/usb.h> #include <zmk/usb.h>
#include <zmk/hog.h> #include <zmk/hog.h>
#include <zmk/event-manager.h>
#include <zmk/events/ble-active-profile-changed.h>
#include <zmk/events/usb-conn-state-changed.h>
#include <logging/log.h> #include <logging/log.h>
LOG_MODULE_DECLARE(zmk, CONFIG_ZMK_LOG_LEVEL); LOG_MODULE_DECLARE(zmk, CONFIG_ZMK_LOG_LEVEL);
int zmk_endpoints_send_report(u8_t usage_page) { #define DEFAULT_ENDPOINT \
int err; COND_CODE_1(IS_ENABLED(CONFIG_ZMK_BLE), (ZMK_ENDPOINT_BLE), (ZMK_ENDPOINT_USB))
struct zmk_hid_keypad_report *keypad_report;
struct zmk_hid_consumer_report *consumer_report; static enum zmk_endpoint current_endpoint = DEFAULT_ENDPOINT;
LOG_DBG("usage page 0x%02X", usage_page); static enum zmk_endpoint preferred_endpoint =
switch (usage_page) { ZMK_ENDPOINT_USB; /* Used if multiple endpoints are ready */
case USAGE_KEYPAD:
keypad_report = zmk_hid_get_keypad_report(); static void update_current_endpoint();
#ifdef CONFIG_ZMK_USB
if (zmk_usb_hid_send_report((u8_t *)keypad_report, sizeof(struct zmk_hid_keypad_report)) != int zmk_endpoints_select(enum zmk_endpoint endpoint) {
0) { LOG_DBG("Selected endpoint %d", endpoint);
LOG_DBG("USB Send Failed");
if (preferred_endpoint == endpoint) {
return 0;
}
preferred_endpoint = endpoint;
#if IS_ENABLED(CONFIG_SETTINGS)
settings_save_one("endpoints/preferred", &preferred_endpoint, sizeof(preferred_endpoint));
#endif
update_current_endpoint();
return 0;
}
int zmk_endpoints_toggle() {
enum zmk_endpoint new_endpoint =
(preferred_endpoint == ZMK_ENDPOINT_USB) ? ZMK_ENDPOINT_BLE : ZMK_ENDPOINT_USB;
return zmk_endpoints_select(new_endpoint);
}
static int send_keypad_report() {
struct zmk_hid_keypad_report *keypad_report = zmk_hid_get_keypad_report();
switch (current_endpoint) {
#if IS_ENABLED(CONFIG_ZMK_USB)
case ZMK_ENDPOINT_USB: {
int err = zmk_usb_hid_send_report((u8_t *)keypad_report, sizeof(*keypad_report));
if (err) {
LOG_ERR("FAILED TO SEND OVER USB: %d", err);
} }
#endif /* CONFIG_ZMK_USB */ return err;
}
#endif /* IS_ENABLED(CONFIG_ZMK_USB) */
#ifdef CONFIG_ZMK_BLE #if IS_ENABLED(CONFIG_ZMK_BLE)
err = zmk_hog_send_keypad_report(&keypad_report->body); case ZMK_ENDPOINT_BLE: {
int err = zmk_hog_send_keypad_report(&keypad_report->body);
if (err) { if (err) {
LOG_ERR("FAILED TO SEND OVER HOG: %d", err); LOG_ERR("FAILED TO SEND OVER HOG: %d", err);
} }
#endif /* CONFIG_ZMK_BLE */ return err;
}
#endif /* IS_ENABLED(CONFIG_ZMK_BLE) */
break; default:
case USAGE_CONSUMER: LOG_ERR("Unsupported endpoint %d", current_endpoint);
consumer_report = zmk_hid_get_consumer_report(); return -ENOTSUP;
#ifdef CONFIG_ZMK_USB }
if (zmk_usb_hid_send_report((u8_t *)consumer_report, }
sizeof(struct zmk_hid_consumer_report)) != 0) {
LOG_DBG("USB Send Failed"); static int send_consumer_report() {
struct zmk_hid_consumer_report *consumer_report = zmk_hid_get_consumer_report();
switch (current_endpoint) {
#if IS_ENABLED(CONFIG_ZMK_USB)
case ZMK_ENDPOINT_USB: {
int err = zmk_usb_hid_send_report((u8_t *)consumer_report, sizeof(*consumer_report));
if (err) {
LOG_ERR("FAILED TO SEND OVER USB: %d", err);
} }
#endif /* CONFIG_ZMK_USB */ return err;
}
#endif /* IS_ENABLED(CONFIG_ZMK_USB) */
#ifdef CONFIG_ZMK_BLE #if IS_ENABLED(CONFIG_ZMK_BLE)
err = zmk_hog_send_consumer_report(&consumer_report->body); case ZMK_ENDPOINT_BLE: {
int err = zmk_hog_send_consumer_report(&consumer_report->body);
if (err) { if (err) {
LOG_ERR("FAILED TO SEND OVER HOG: %d", err); LOG_ERR("FAILED TO SEND OVER HOG: %d", err);
} }
#endif /* CONFIG_ZMK_BLE */ return err;
}
#endif /* IS_ENABLED(CONFIG_ZMK_BLE) */
break; default:
LOG_ERR("Unsupported endpoint %d", current_endpoint);
return -ENOTSUP;
}
}
int zmk_endpoints_send_report(u8_t usage_page) {
LOG_DBG("usage page 0x%02X", usage_page);
switch (usage_page) {
case USAGE_KEYPAD:
return send_keypad_report();
case USAGE_CONSUMER:
return send_consumer_report();
default: default:
LOG_ERR("Unsupported usage page %d", usage_page); LOG_ERR("Unsupported usage page %d", usage_page);
return -ENOTSUP; return -ENOTSUP;
} }
}
#if IS_ENABLED(CONFIG_SETTINGS)
static int endpoints_handle_set(const char *name, size_t len, settings_read_cb read_cb,
void *cb_arg) {
LOG_DBG("Setting endpoint value %s", log_strdup(name));
if (settings_name_steq(name, "preferred", NULL)) {
if (len != sizeof(enum zmk_endpoint)) {
LOG_ERR("Invalid endpoint size (got %d expected %d)", len, sizeof(enum zmk_endpoint));
return -EINVAL;
}
int err = read_cb(cb_arg, &preferred_endpoint, sizeof(enum zmk_endpoint));
if (err <= 0) {
LOG_ERR("Failed to read preferred endpoint from settings (err %d)", err);
return err;
}
update_current_endpoint();
}
return 0;
}
struct settings_handler endpoints_handler = {.name = "endpoints", .h_set = endpoints_handle_set};
#endif /* IS_ENABLED(CONFIG_SETTINGS) */
static int zmk_endpoints_init(struct device *_arg) {
#if IS_ENABLED(CONFIG_SETTINGS)
settings_subsys_init();
int err = settings_register(&endpoints_handler);
if (err) {
LOG_ERR("Failed to register the endpoints settings handler (err %d)", err);
return err;
}
settings_load();
#endif
return 0; return 0;
} }
static bool is_usb_ready() {
#if IS_ENABLED(CONFIG_ZMK_USB)
return zmk_usb_is_hid_ready();
#else
return false;
#endif
}
static bool is_ble_ready() {
#if IS_ENABLED(CONFIG_ZMK_BLE)
return zmk_ble_active_profile_is_connected();
#else
return false;
#endif
}
static enum zmk_endpoint get_selected_endpoint() {
if (is_ble_ready()) {
if (is_usb_ready()) {
LOG_DBG("Both endpoints are ready. Using %d", preferred_endpoint);
return preferred_endpoint;
}
LOG_DBG("Only BLE is ready.");
return ZMK_ENDPOINT_BLE;
}
if (is_usb_ready()) {
LOG_DBG("Only USB is ready.");
return ZMK_ENDPOINT_USB;
}
LOG_DBG("No endpoints are ready.");
return DEFAULT_ENDPOINT;
}
static void disconnect_current_endpoint() {
zmk_hid_keypad_clear();
zmk_hid_consumer_clear();
zmk_endpoints_send_report(USAGE_KEYPAD);
zmk_endpoints_send_report(USAGE_CONSUMER);
}
static void update_current_endpoint() {
enum zmk_endpoint new_endpoint = get_selected_endpoint();
if (new_endpoint != current_endpoint) {
/* Cancel all current keypresses so keys don't stay held on the old endpoint. */
disconnect_current_endpoint();
current_endpoint = new_endpoint;
LOG_INF("Endpoint changed: %d", current_endpoint);
}
}
static int endpoint_listener(const struct zmk_event_header *eh) {
update_current_endpoint();
return 0;
}
ZMK_LISTENER(endpoint_listener, endpoint_listener);
#if IS_ENABLED(CONFIG_ZMK_USB)
ZMK_SUBSCRIPTION(endpoint_listener, usb_conn_state_changed);
#endif
#if IS_ENABLED(CONFIG_ZMK_BLE)
ZMK_SUBSCRIPTION(endpoint_listener, ble_active_profile_changed);
#endif
SYS_INIT(zmk_endpoints_init, APPLICATION, CONFIG_APPLICATION_INIT_PRIORITY);

10
app/src/events/usb_conn_state_changed.c

@ -0,0 +1,10 @@
/*
* Copyright (c) 2020 The ZMK Contributors
*
* SPDX-License-Identifier: MIT
*/
#include <kernel.h>
#include <zmk/events/usb-conn-state-changed.h>
ZMK_EVENT_IMPL(usb_conn_state_changed);

4
app/src/hid.c

@ -68,6 +68,8 @@ int zmk_hid_keypad_release(zmk_key code) {
return 0; return 0;
}; };
void zmk_hid_keypad_clear() { memset(&kp_report.body, 0, sizeof(kp_report.body)); }
int zmk_hid_consumer_press(zmk_key code) { int zmk_hid_consumer_press(zmk_key code) {
TOGGLE_CONSUMER(0U, code); TOGGLE_CONSUMER(0U, code);
return 0; return 0;
@ -78,6 +80,8 @@ int zmk_hid_consumer_release(zmk_key code) {
return 0; return 0;
}; };
void zmk_hid_consumer_clear() { memset(&consumer_report.body, 0, sizeof(consumer_report.body)); }
struct zmk_hid_keypad_report *zmk_hid_get_keypad_report() { struct zmk_hid_keypad_report *zmk_hid_get_keypad_report() {
return &kp_report; return &kp_report;
} }

9
app/src/power.c

@ -23,14 +23,7 @@ static u32_t power_last_uptime;
bool is_usb_power_present() { bool is_usb_power_present() {
#ifdef CONFIG_USB #ifdef CONFIG_USB
enum usb_dc_status_code usb_status = zmk_usb_get_status(); return zmk_usb_is_powered();
switch (usb_status) {
case USB_DC_DISCONNECTED:
case USB_DC_UNKNOWN:
return false;
default:
return true;
}
#else #else
return false; return false;
#endif /* CONFIG_USB */ #endif /* CONFIG_USB */

29
app/src/usb.c

@ -13,6 +13,8 @@
#include <zmk/hid.h> #include <zmk/hid.h>
#include <zmk/keymap.h> #include <zmk/keymap.h>
#include <zmk/event-manager.h>
#include <zmk/events/usb-conn-state-changed.h>
LOG_MODULE_DECLARE(zmk, CONFIG_ZMK_LOG_LEVEL); LOG_MODULE_DECLARE(zmk, CONFIG_ZMK_LOG_LEVEL);
@ -53,9 +55,34 @@ int zmk_usb_hid_send_report(const u8_t *report, size_t len) {
#endif /* CONFIG_ZMK_USB */ #endif /* CONFIG_ZMK_USB */
static void raise_usb_status_changed_event() {
struct usb_conn_state_changed *ev = new_usb_conn_state_changed();
ev->conn_state = zmk_usb_get_conn_state();
ZMK_EVENT_RAISE(ev);
}
enum usb_dc_status_code zmk_usb_get_status() { return usb_status; } enum usb_dc_status_code zmk_usb_get_status() { return usb_status; }
void usb_status_cb(enum usb_dc_status_code status, const u8_t *params) { usb_status = status; }; enum zmk_usb_conn_state zmk_usb_get_conn_state() {
switch (usb_status) {
case USB_DC_DISCONNECTED:
case USB_DC_UNKNOWN:
return ZMK_USB_CONN_NONE;
case USB_DC_ERROR:
case USB_DC_RESET:
return ZMK_USB_CONN_POWERED;
default:
return ZMK_USB_CONN_HID;
}
}
void usb_status_cb(enum usb_dc_status_code status, const u8_t *params) {
usb_status = status;
raise_usb_status_changed_event();
};
static int zmk_usb_init(struct device *_arg) { static int zmk_usb_init(struct device *_arg) {
int usb_enable_ret; int usb_enable_ret;

59
docs/docs/behavior/outputs.md

@ -0,0 +1,59 @@
---
title: Output Selection Behavior
sidebar_label: Output Selection
---
## Summary
The output behavior allows selecting whether keyboard output is sent to the
USB or bluetooth connection when both are connected. This allows connecting a
keyboard to USB for power but outputting to a different device over bluetooth.
By default, output is sent to USB when both USB and BLE are connected.
Once you select a different output, it will be remembered until you change it again.
## Output Command Defines
Output command defines are provided through the [`dt-bindings/zmk/outputs.h`](https://github.com/zmkfirmware/zmk/blob/main/app/include/dt-bindings/zmk/outputs.h)
header, which is added at the top of the keymap file:
```
#include <dt-bindings/zmk/outputs.h>
```
This allows you to reference the actions defined in this header:
| Define | Action | Alias |
| ------------------- | ----------------------------------------------- | --------- |
| `OUTPUT_USB_CMD` | Prefer sending to USB | `OUT_USB` |
| `OUTPUT_BLE_CMD` | Prefer sending to the current bluetooth profile | `OUT_BLE` |
| `OUTPUT_TOGGLE_CMD` | Toggle between USB and BLE | `OUT_TOG` |
## Output Selection Behavior
The output selection behavior changes the preferred output on press.
### Behavior Binding
- Reference: `&out`
- Parameter #1: Command, e.g. `OUT_BLE`
### Example:
1. Behavior binding to prefer sending keyboard output to USB
```
&out OUT_USB
```
1. Behavior binding to prefer sending keyboard output to the current bluetooth profile
```
&out OUT_BLE
```
1. Behavior binding to toggle between preferring USB and BLE
```
&out OUT_TOG
```

1
docs/sidebars.js

@ -22,6 +22,7 @@ module.exports = {
"behavior/mod-tap", "behavior/mod-tap",
"behavior/reset", "behavior/reset",
"behavior/bluetooth", "behavior/bluetooth",
"behavior/outputs",
"behavior/lighting", "behavior/lighting",
"behavior/power", "behavior/power",
], ],

Loading…
Cancel
Save