You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.

513 lines
9.2 KiB

# Copyright (c) 2020 The ZMK Contributors
# SPDX-License-Identifier: MIT
mainmenu "ZMK Firmware"
menu "ZMK"
menu "Basic Keyboard Setup"
config ZMK_KEYBOARD_NAME
string "Keyboard Name"
config USB_DEVICE_PRODUCT
default ZMK_KEYBOARD_NAME
config BT_DEVICE_NAME
default ZMK_KEYBOARD_NAME
config USB_DEVICE_VID
default 0x1D50
config USB_DEVICE_PID
default 0x615E
config USB_DEVICE_MANUFACTURER
default "ZMK Project"
menu "HID"
choice ZMK_HID_REPORT_TYPE
prompt "HID Report Type"
config ZMK_HID_REPORT_TYPE_HKRO
bool "#-Key Roll Over (HKRO) HID Report"
help
Enable # key roll over for HID report. This selection is "boot keyboard" compatible
but limits the total number of possible keys to report as held to #.
config ZMK_HID_REPORT_TYPE_NKRO
bool "Full N-Key Roll Over (NKRO) HID Report"
help
Enable full N-Key Roll Over for HID output. This selection will prevent the keyboard
from working with some BIOS/UEFI versions that only support "boot keyboard" support.
This option also prevents using some infrequently used higher range HID usages.
endchoice
if ZMK_HID_REPORT_TYPE_HKRO
config ZMK_HID_KEYBOARD_REPORT_SIZE
int "# Keyboard Keys Reportable"
default 6
endif
config ZMK_HID_CONSUMER_REPORT_SIZE
int "# Consumer Keys Reportable"
default 6
choice ZMK_HID_CONSUMER_REPORT_USAGES
prompt "HID Report Type"
config ZMK_HID_CONSUMER_REPORT_USAGES_FULL
bool "Full Consumer HID Usage Support"
help
Enable full Consumer usage ID values to be sent to hosts. Allows for less
frequently used usages, but has compatibability issues with some host OSes.
config ZMK_HID_CONSUMER_REPORT_USAGES_BASIC
bool "Basic Consumer HID Usage Support"
help
Enable Consumer usage ID values up to "Playback Speed - Slow" to be sent to
hosts. Allows for broader compatibability with more host OSes.
endchoice
menu "Output Types"
config ZMK_USB
bool "USB"
select USB
select USB_DEVICE_STACK
select USB_DEVICE_HID
if ZMK_USB
config USB_NUMOF_EP_WRITE_RETRIES
default 10
#ZMK_USB
endif
menuconfig ZMK_BLE
bool "BLE (HID over GATT)"
select BT
select BT_SMP
select BT_SMP_SC_PAIR_ONLY
select BT_SMP_APP_PAIRING_ACCEPT
select BT_PERIPHERAL
select BT_DIS
select BT_BAS
select BT_SETTINGS
select SETTINGS
if ZMK_BLE
config SYSTEM_WORKQUEUE_STACK_SIZE
default 2048
config ZMK_BLE_THREAD_STACK_SIZE
int "BLE notify thread stack size"
default 512
config ZMK_BLE_THREAD_PRIORITY
int "BLE notify thread priority"
default 5
config ZMK_BLE_KEYBOARD_REPORT_QUEUE_SIZE
int "Max number of keyboard HID reports to queue for sending over BLE"
default 20
config ZMK_BLE_CONSUMER_REPORT_QUEUE_SIZE
int "Max number of consumer HID reports to queue for sending over BLE"
default 5
config ZMK_BLE_CLEAR_BONDS_ON_START
bool "Configuration that clears all bond information from the keyboard on startup."
default n
# HID GATT notifications sent this way are *not* picked up by Linux, and possibly others.
config BT_GATT_NOTIFY_MULTIPLE
default n
config BT_DEVICE_APPEARANCE
default 961
config ZMK_BLE_PASSKEY_ENTRY
bool "Experimental: Requiring typing passkey from host to pair BLE connection"
default n
#ZMK_BLE
endif
#Output Types
endmenu
# HID
endmenu
menu "Split Support"
config ZMK_SPLIT
bool "Split keyboard support"
if ZMK_SPLIT
menuconfig ZMK_SPLIT_BLE
bool "Split keyboard support via BLE transport"
depends on ZMK_BLE
default y
select BT_USER_PHY_UPDATE
if ZMK_SPLIT_BLE
menuconfig ZMK_SPLIT_BLE_ROLE_CENTRAL
bool "Central"
select BT_CENTRAL
select BT_GATT_CLIENT
select BT_GATT_AUTO_DISCOVER_CCC
if ZMK_SPLIT_BLE_ROLE_CENTRAL
config ZMK_SPLIT_BLE_CENTRAL_POSITION_QUEUE_SIZE
int "Max number of key position state events to queue when received from peripherals"
default 5
endif
if !ZMK_SPLIT_BLE_ROLE_CENTRAL
config ZMK_SPLIT_BLE_PERIPHERAL_STACK_SIZE
int "BLE split peripheral notify thread stack size"
default 512
config ZMK_SPLIT_BLE_PERIPHERAL_PRIORITY
int "BLE split peripheral notify thread priority"
default 5
config ZMK_SPLIT_BLE_PERIPHERAL_POSITION_QUEUE_SIZE
int "Max number of key position state events to queue to send to the central"
default 10
config ZMK_USB
default n
config BT_MAX_PAIRED
default 1
config BT_MAX_CONN
default 1
config BT_GAP_AUTO_UPDATE_CONN_PARAMS
default n
#!ZMK_SPLIT_BLE_ROLE_CENTRAL
endif
#ZMK_SPLIT_BLE
endif
#ZMK_SPLIT
endif
if ZMK_BLE
if ZMK_SPLIT_BLE && ZMK_SPLIT_BLE_ROLE_CENTRAL
config BT_MAX_CONN
default 6
config BT_MAX_PAIRED
default 6
#ZMK_SPLIT_BLE && ZMK_SPLIT_BLE_ROLE_CENTRAL
endif
if !ZMK_SPLIT_BLE
config BT_MAX_CONN
default 5
config BT_MAX_PAIRED
default 5
#!ZMK_SPLIT_BLE
endif
#ZMK_BLE
endif
#Split Support
endmenu
#Basic Keyboard Setup
endmenu
menu "Display/LED Options"
rsource "src/display/Kconfig"
config ZMK_RGB_UNDERGLOW
bool "RGB Adressable LED Underglow"
select LED_STRIP
if ZMK_RGB_UNDERGLOW
# This default value cuts down on tons of excess .conf files, if you're using GPIO, manually disable this
config SPI
default y
config ZMK_RGB_UNDERGLOW_EXT_POWER
bool "RGB underglow toggling also controls external power"
default y
config ZMK_RGB_UNDERGLOW_BRT_MIN
int "RGB underglow minimum brightness in percent"
range 0 100
default 0
config ZMK_RGB_UNDERGLOW_BRT_MAX
int "RGB underglow maximum brightness in percent"
range ZMK_RGB_UNDERGLOW_BRT_MIN 100
default 100
config ZMK_RGB_UNDERGLOW_HUE_STEP
int "RGB underglow hue step in degrees"
range 0 359
default 10
config ZMK_RGB_UNDERGLOW_SAT_STEP
int "RGB underglow saturation step in percent"
range 0 100
default 10
config ZMK_RGB_UNDERGLOW_BRT_STEP
int "RGB underglow brightness step in percent"
range 0 100
default 10
config ZMK_RGB_UNDERGLOW_HUE_START
int "RGB underglow start hue value in degrees"
range 0 359
default 0
config ZMK_RGB_UNDERGLOW_SAT_START
int "RGB underglow start saturations value in percent"
range 0 100
default 100
config ZMK_RGB_UNDERGLOW_BRT_START
int "RGB underglow start brightness value in percent"
range ZMK_RGB_UNDERGLOW_BRT_MIN ZMK_RGB_UNDERGLOW_BRT_MAX
default ZMK_RGB_UNDERGLOW_BRT_MAX
config ZMK_RGB_UNDERGLOW_SPD_START
int "RGB underglow start animation speed value"
range 1 5
default 3
config ZMK_RGB_UNDERGLOW_EFF_START
int "RGB underglow start effect int value related to the effect enum list"
range 0 3
default 0
config ZMK_RGB_UNDERGLOW_ON_START
bool "RGB underglow starts on by default"
default y
#ZMK_RGB_UNDERGLOW
endif
#Display/LED Options
endmenu
menu "Power Management"
config ZMK_IDLE_TIMEOUT
int "Milliseconds of inactivity before entering idle state (OLED shutoff, etc)"
default 30000
config ZMK_SLEEP
bool "Enable deep sleep support"
imply USB
if ZMK_SLEEP
choice SYS_PM_POLICY
default PM_POLICY_APP
endchoice
config PM_DEVICE
default y
config ZMK_IDLE_SLEEP_TIMEOUT
int "Milliseconds of inactivity before entering deep sleep"
default 900000
#ZMK_SLEEP
endif
config ZMK_EXT_POWER
bool "Enable support to control external power output"
default y
#Power Management
endmenu
menu "Combo options"
config ZMK_COMBO_MAX_PRESSED_COMBOS
int "Maximum number of currently pressed combos"
default 4
config ZMK_COMBO_MAX_COMBOS_PER_KEY
int "Maximum number of combos per key"
default 5
config ZMK_COMBO_MAX_KEYS_PER_COMBO
int "Maximum number of keys per combo"
default 4
#Display/LED Options
endmenu
menu "Advanced"
menu "Initialization Priorities"
if USB
config ZMK_USB_INIT_PRIORITY
int "USB Init Priority"
default 50
#USB
endif
if ZMK_BLE || ZMK_SPLIT_BLE
config ZMK_BLE_INIT_PRIORITY
int "BLE Init Priority"
default 50
#ZMK_BLE || ZMK_SPLIT_BLE
endif
#Initialization Priorities
endmenu
menu "KSCAN Settings"
config ZMK_KSCAN_EVENT_QUEUE_SIZE
int "Size of the event queue for KSCAN events to buffer events"
default 4
config ZMK_KSCAN_MOCK_DRIVER
bool "Enable mock kscan driver to simulate key presses"
config ZMK_KSCAN_COMPOSITE_DRIVER
bool "Enable composite kscan driver to combine kscan devices"
#KSCAN Settings
endmenu
menu "USB Logging"
config ZMK_USB_LOGGING
bool "Enable USB CDC ACM logging to help debug"
select LOG
select USB
select USB_DEVICE_STACK
select USB_CDC_ACM
select SERIAL
select CONSOLE
select UART_INTERRUPT_DRIVEN
select UART_LINE_CTRL
select UART_CONSOLE
select USB_UART_CONSOLE
if ZMK_USB_LOGGING
config ZMK_LOG_LEVEL
default 4
config USB_CDC_ACM_RINGBUF_SIZE
default 1024
config USB_CDC_ACM_DEVICE_NAME
default "CDC_ACM"
config USB_CDC_ACM_DEVICE_COUNT
default 1
config UART_CONSOLE_ON_DEV_NAME
default "CDC_ACM_0"
config LOG_BUFFER_SIZE
default 8192
config LOG_STRDUP_BUF_COUNT
default 16
#ZMK_USB_LOGGING
endif
#USB Logging
endmenu
if SETTINGS
config ZMK_SETTINGS_SAVE_DEBOUNCE
int "Milliseconds to debounce settings saves"
default 60000
#SETTINGS
endif
#Advanced
endmenu
#ZMK
endmenu
config HEAP_MEM_POOL_SIZE
default 8192
config KERNEL_BIN_NAME
default "zmk"
config REBOOT
default y
config USB
default y if HAS_HW_NRF_USBD
config ZMK_WPM
bool "Calculate WPM"
default n
config SENSOR
default y
choice CBPRINTF_IMPLEMENTATION
default CBPRINTF_NANO
endchoice
module = ZMK
module-str = zmk
source "subsys/logging/Kconfig.template.log_config"
rsource "boards/Kconfig"
rsource "boards/shields/*/Kconfig.defconfig"
rsource "boards/shields/*/Kconfig.shield"
osource "$(ZMK_CONFIG)/boards/shields/*/Kconfig.defconfig"
osource "$(ZMK_CONFIG)/boards/shields/*/Kconfig.shield"
source "Kconfig.zephyr"