simplify main and make pynput/evdev api consistent

README.md

@@ -15,7 +15,7 @@ pip install remarkable-mouse
 remouse
 ```
 
-By default, `10.11.99.1` is used as the address. Seems to work pretty well wirelessly, too. By default ssh-agent is used to authenticate if it is available, otherwise you are asked for your password.
+By default, `10.11.99.1` is used as the address. Seems to work pretty well wirelessly, too. By default ssh-agent is used to authenticate if it is available, otherwise you are asked for your password.  Find your password in the reMarkable's [settings menu](https://remarkablewiki.com/tech/ssh).
 
 # Examples
 

remarkable_mouse/evdev.py

@@ -3,9 +3,11 @@ import struct
 import subprocess
 from screeninfo import get_monitors
 import time
+from itertools import cycle
+from socket import timeout as TimeoutError
 
 logging.basicConfig(format='%(message)s')
-log = logging.getLogger(__name__)
+log = logging.getLogger('remouse')
 
 # Maximum value that can be reported by the Wacom driver for the X axis
 MAX_ABS_X = 20967
@@ -13,6 +15,11 @@ MAX_ABS_X = 20967
 # Maximum value that can be reported by the Wacom driver for the Y axis
 MAX_ABS_Y = 15725
 
+# Maximum value that can be reported by the cyttsp5_mt driver for the X axis
+MT_MAX_ABS_X = 767
+
+# Maximum value that can be reported by the cyttsp5_mt driver for the Y axis
+MT_MAX_ABS_Y = 1023
 
 def create_local_device():
     """
@@ -26,23 +33,70 @@ def create_local_device():
     device = libevdev.Device()
 
     # Set device properties to emulate those of Wacom tablets
-    device.name = 'reMarkable tablet'
+    device.name = 'reMarkable pen'
 
     device.id = {
-        'bustype': 0x18, # i2c
+        'bustype': 0x03, # usb
         'vendor': 0x056a, # wacom
         'product': 0,
         'version': 54
     }
 
+    # ----- Buttons -----
+
     # Enable buttons supported by the digitizer
     device.enable(libevdev.EV_KEY.BTN_TOOL_PEN)
     device.enable(libevdev.EV_KEY.BTN_TOOL_RUBBER)
     device.enable(libevdev.EV_KEY.BTN_TOUCH)
     device.enable(libevdev.EV_KEY.BTN_STYLUS)
     device.enable(libevdev.EV_KEY.BTN_STYLUS2)
+    device.enable(libevdev.EV_KEY.BTN_0)
+    device.enable(libevdev.EV_KEY.BTN_1)
+    device.enable(libevdev.EV_KEY.BTN_2)
 
-    # Enable position, tilt, distance and pressure change events
+    # ----- Touch -----
+
+    # Enable Touch input
+    device.enable(
+        libevdev.EV_ABS.ABS_MT_POSITION_X,
+        libevdev.InputAbsInfo(minimum=0, maximum=MT_MAX_ABS_X, resolution=2531) # resolution correct?
+    )
+    device.enable(
+        libevdev.EV_ABS.ABS_MT_POSITION_Y,
+        libevdev.InputAbsInfo(minimum=0, maximum=MT_MAX_ABS_Y, resolution=2531) # resolution correct?
+    )
+    device.enable(
+        libevdev.EV_ABS.ABS_MT_PRESSURE,
+        libevdev.InputAbsInfo(minimum=0, maximum=255)
+    )
+    device.enable(
+        libevdev.EV_ABS.ABS_MT_TOUCH_MAJOR,
+        libevdev.InputAbsInfo(minimum=0, maximum=255)
+    )
+    device.enable(
+        libevdev.EV_ABS.ABS_MT_TOUCH_MINOR,
+        libevdev.InputAbsInfo(minimum=0, maximum=255)
+    )
+    device.enable(
+        libevdev.EV_ABS.ABS_MT_ORIENTATION,
+        libevdev.InputAbsInfo(minimum=-127, maximum=127)
+    )
+    device.enable(
+        libevdev.EV_ABS.ABS_MT_SLOT,
+        libevdev.InputAbsInfo(minimum=0, maximum=31)
+    )
+    device.enable(
+        libevdev.EV_ABS.ABS_MT_TOOL_TYPE,
+        libevdev.InputAbsInfo(minimum=0, maximum=1)
+    )
+    device.enable(
+        libevdev.EV_ABS.ABS_MT_TRACKING_ID,
+        libevdev.InputAbsInfo(minimum=0, maximum=65535)
+    )
+
+    # ----- Pen -----
+
+    # Enable pen input, tilt and pressure
     device.enable(
         libevdev.EV_ABS.ABS_X,
         libevdev.InputAbsInfo(
@@ -61,38 +115,26 @@ def create_local_device():
     )
     device.enable(
         libevdev.EV_ABS.ABS_PRESSURE,
-        libevdev.InputAbsInfo(
+        libevdev.InputAbsInfo(minimum=0, maximum=4095)
-            minimum=0,
-            maximum=4095
-        )
     )
     device.enable(
         libevdev.EV_ABS.ABS_DISTANCE,
-        libevdev.InputAbsInfo(
+        libevdev.InputAbsInfo(minimum=0, maximum=255)
-            minimum=0,
-            maximum=255
-        )
     )
     device.enable(
         libevdev.EV_ABS.ABS_TILT_X,
-        libevdev.InputAbsInfo(
+        libevdev.InputAbsInfo(minimum=-9000, maximum=9000)
-            minimum=-9000,
-            maximum=9000
-        )
     )
     device.enable(
         libevdev.EV_ABS.ABS_TILT_Y,
-        libevdev.InputAbsInfo(
+        libevdev.InputAbsInfo(minimum=-9000, maximum=9000)
-            minimum=-9000,
-            maximum=9000
-        )
     )
 
     return device.create_uinput_device()
 
 
-# remap screen coordinates to wacom coordinates
+# map computer screen coordinates to rM pen coordinates
-def remap(x, y, wacom_width, wacom_height, monitor_width,
+def map_comp2pen(x, y, wacom_width, wacom_height, monitor_width,
           monitor_height, mode, orientation=None):
 
     if orientation in ('bottom', 'top'):
@@ -113,86 +155,175 @@ def remap(x, y, wacom_width, wacom_height, monitor_width,
         scaling * (y - (monitor_height - wacom_height / scaling) / 2)
     )
 
-def pipe_device(args, remote_device, local_device):
+# map computer screen coordinates to rM touch coordinates
+def map_comp2touch(x, y, touch_width, touch_height, monitor_width,
+          monitor_height, mode, orientation=None):
+
+    if orientation in ('left', 'right'):
+        x, y = y, x
+        monitor_width, monitor_height = monitor_height, monitor_width
+
+    ratio_width, ratio_height = touch_width / monitor_width, touch_height / monitor_height
+
+    if mode == 'fit':
+        scaling = max(ratio_width, ratio_height)
+    elif mode == 'fill':
+        scaling = min(ratio_width, ratio_height)
+    else:
+        raise NotImplementedError
+
+    return (
+        scaling * (x - (monitor_width - touch_width / scaling) / 2),
+        scaling * (y - (monitor_height - touch_height / scaling) / 2)
+    )
+
+def configure_xinput(*, orientation, monitor, threshold, mode):
     """
-    Pipe events from a remote device to a local device.
+    Configure screen mapping settings from rM to local machine
 
     Args:
-        args: argparse arguments
+        orientation (str): location of charging port relative to screen
-        remote_device (paramiko.ChannelFile): read-only stream of input events
+        monitor (int): monitor number to use
-        local_device: local virtual input device to write events to
+        threshold (int): pressure threshold for detecting pen
+        mode (str): scaling mode when mapping reMarkable pen coordinates to screen
     """
 
     # give time for virtual device creation before running xinput commands
     time.sleep(1)
 
+    # ----- Pen -----
+
     # set orientation with xinput
-    orientation = {'left': 0, 'bottom': 1, 'top': 2, 'right': 3}[args.orientation]
+    orientation = {'left': 0, 'bottom': 1, 'top': 2, 'right': 3}[orientation]
     result = subprocess.run(
-        'xinput --set-prop "reMarkable tablet stylus" "Wacom Rotation" {}'.format(orientation),
+        'xinput --set-prop "reMarkable pen stylus" "Wacom Rotation" {}'.format(orientation),
         capture_output=True,
         shell=True
     )
     if result.returncode != 0:
-        log.warning("Error setting orientation: %s", result.stderr)
+        log.warning("Error setting orientation: %s", result.stderr.decode('utf8'))
 
     # set monitor to use
-    monitor = get_monitors()[args.monitor]
+    monitor = get_monitors()[monitor]
     log.debug('Chose monitor: {}'.format(monitor))
     result = subprocess.run(
-        'xinput --map-to-output "reMarkable tablet stylus" {}'.format(monitor.name),
+        'xinput --map-to-output "reMarkable pen stylus" {}'.format(monitor.name),
         capture_output=True,
         shell=True
     )
     if result.returncode != 0:
-        log.warning("Error setting monitor: %s", result.stderr)
+        log.warning("Error setting monitor: %s", result.stderr.decode('utf8'))
 
     # set stylus pressure
     result = subprocess.run(
-        'xinput --set-prop "reMarkable tablet stylus" "Wacom Pressure Threshold" {}'.format(args.threshold),
+        'xinput --set-prop "reMarkable pen stylus" "Wacom Pressure Threshold" {}'.format(threshold),
         capture_output=True,
         shell=True
     )
     if result.returncode != 0:
-        log.warning("Error setting pressure threshold: %s", result.stderr)
+        log.warning("Error setting pressure threshold: %s", result.stderr.decode('utf8'))
 
     # set fitting mode
-    min_x, min_y = remap(
+    min_x, min_y = map_comp2pen(
         0, 0,
         MAX_ABS_X, MAX_ABS_Y, monitor.width, monitor.height,
-        args.mode,
+        mode,
-        args.orientation
+        orientation
     )
-    max_x, max_y = remap(
+    max_x, max_y = map_comp2pen(
         monitor.width, monitor.height,
         MAX_ABS_X, MAX_ABS_Y, monitor.width, monitor.height,
-        args.mode,
+        mode,
-        args.orientation
+        orientation
     )
     log.debug("Wacom tablet area: {} {} {} {}".format(min_x, min_y, max_x, max_y))
     result = subprocess.run(
-        'xinput --set-prop "reMarkable tablet stylus" "Wacom Tablet Area" \
+        'xinput --set-prop "reMarkable pen stylus" "Wacom Tablet Area" \
         {} {} {} {}'.format(min_x, min_y, max_x, max_y),
         capture_output=True,
         shell=True
     )
     if result.returncode != 0:
-        log.warning("Error setting fit: %s", result.stderr)
+        log.warning("Error setting fit: %s", result.stderr.decode('utf8'))
+
+    # ----- Touch -----
+
+    # Set touch fitting mode
+    mt_min_x, mt_min_y = map_comp2touch(
+        0, 0,
+        MT_MAX_ABS_X, MT_MAX_ABS_Y, monitor.width, monitor.height,
+        mode,
+        orientation
+    )
+    mt_max_x, mt_max_y = map_comp2touch(
+        monitor.width, monitor.height,
+        MT_MAX_ABS_X, MT_MAX_ABS_Y, monitor.width, monitor.height,
+        mode,
+        orientation
+    )
+    log.debug("Multi-touch area: {} {} {} {}".format(mt_min_x, mt_min_y, mt_max_x * 2, mt_max_y * 2))
+    result = subprocess.run(
+        'xinput --set-prop "reMarkable pen touch" "Wacom Tablet Area" \
+        {} {} {} {}'.format(mt_min_x, mt_min_y, mt_max_x, mt_max_y),
+        capture_output=True,
+        shell=True
+    )
+    if result.returncode != 0:
+        log.warning("Error setting fit: %s", result.stderr.decode('utf8'))
+    result = subprocess.run( # Just need to rotate the touchscreen -90 so that it matches the wacom sensor.
+        'xinput --set-prop "reMarkable pen touch" "Coordinate Transformation Matrix" 0 1 0 -1 0 1 0 0 1',
+        capture_output=True,
+        shell=True
+    )
+    if result.returncode != 0:
+        log.warning("Error setting orientation: %s", result.stderr.decode('utf8'))
+
+
+def read_tablet(rm_inputs, *, orientation, monitor, threshold, mode):
+    """Pipe rM evdev events to local device
+
+    Args:
+        rm_inputs (dictionary of paramiko.ChannelFile): dict of pen, button
+            and touch input streams
+        orientation (str): tablet orientation
+        monitor (int): monitor number to map to
+        threshold (int): pressure threshold
+        mode (str): mapping mode
+    """
+
+    local_device = create_local_device()
+    log.debug("Created virtual input device '{}'".format(local_device.devnode))
+
+    configure_xinput(
+        orientation=orientation,
+        monitor=monitor,
+        threshold=threshold,
+        mode=mode,
+    )
 
     import libevdev
 
-    # While debug mode is active, we log events grouped together between
-    # SYN_REPORT events. Pending events for the next log are stored here
     pending_events = []
 
+    # loop inputs forever
+    # for input_name, stream in cycle(rm_inputs.items()):
+    stream = rm_inputs['pen']
     while True:
-        e_time, e_millis, e_type, e_code, e_value = struct.unpack('2IHHi', remote_device.read(16))
+        try:
+            data = stream.read(16)
+        except TimeoutError:
+            continue
+
+        e_time, e_millis, e_type, e_code, e_value = struct.unpack('2IHHi', data)
+
         e_bit = libevdev.evbit(e_type, e_code)
         event = libevdev.InputEvent(e_bit, value=e_value)
 
         local_device.send_events([event])
 
-        if args.debug:
+        # While debug mode is active, we log events grouped together between
+        # SYN_REPORT events. Pending events for the next log are stored here
+        if log.level == logging.DEBUG:
             if e_bit == libevdev.EV_SYN.SYN_REPORT:
                 event_repr = ', '.join(
                     '{} = {}'.format(
@@ -203,4 +334,99 @@ def pipe_device(args, remote_device, local_device):
                 log.debug('{}.{:0>6} - {}'.format(e_time, e_millis, event_repr))
                 pending_events = []
             else:
-                pending_events += [event]
+                pending_events.append(event)
+
+
+def create_handler(*, orientation, monitor, threshold, mode):
+    import libevdev
+
+    try:
+        local_device = create_local_device()
+        log.info("Created virtual input device '{}'".format(local_device.devnode))
+    except PermissionError:
+        log.error('Insufficient permissions for creating a virtual input device')
+        log.error('Make sure you run this program as root')
+        sys.exit(1)
+
+    configure_xinput(
+        orientation=orientation,
+        monitor=monitor,
+        threshold=threshold,
+        mode=mode,
+    )
+
+    pending_events = []
+
+
+    def handler(e_time, e_millis, e_type, e_code, e_value):
+
+        e_bit = libevdev.evbit(e_type, e_code)
+        event = libevdev.InputEvent(e_bit, value=e_value)
+        local_device.send_events([event])
+
+        # While debug mode is active, we log events grouped together between
+        # SYN_REPORT events. Pending events for the next log are stored here
+        # if log.level == logging.DEBUG:
+        #     if e_bit == libevdev.EV_SYN.SYN_REPORT:
+        #         event_repr = ', '.join(
+        #             '{} = {}'.format(
+        #                 event.code.name,
+        #                 event.value
+        #             ) for event in pending_events
+        #         )
+        #         log.debug('{}.{:0>6} - {}'.format(e_time, e_millis, event_repr))
+        #         pending_events = []
+        #     else:
+        #         pending_events.append(event)
+
+    return handler
+
+
+
+
+
+
+
+
+
+
+
+    # pen_down = 0
+
+    # while True:
+    #     for device in rm_inputs:
+    #         try:
+    #             e_time, e_millis, e_type, e_code, e_value = struct.unpack('2IHHi', ev.read(16))
+    #             e_bit = libevdev.evbit(e_type, e_code)
+    #         except timeout:
+    #             continue
+
+    #         if e_bit == libevdev.EV_KEY.KEY_LEFT:
+    #             e_bit = libevdev.EV_KEY.BTN_0
+    #         if e_bit == libevdev.EV_KEY.KEY_HOME:
+    #             e_bit = libevdev.EV_KEY.BTN_1
+    #         if e_bit == libevdev.EV_KEY.KEY_RIGHT:
+    #             e_bit = libevdev.EV_KEY.BTN_2
+
+    #         event = libevdev.InputEvent(e_bit, value=e_value)
+
+    #         if e_bit == libevdev.EV_KEY.BTN_TOOL_PEN:
+    #             pen_down = e_value
+
+    #         if pen_down and 'ABS_MT' in event.code.name: # Palm rejection
+    #             pass
+    #         else:
+    #             local_device.send_events([event])
+
+    #         if args.debug:
+    #             if e_bit == libevdev.EV_SYN.SYN_REPORT:
+    #                 event_repr = ', '.join(
+    #                     '{} = {}'.format(
+    #                         event.code.name,
+    #                         event.value
+    #                     ) for event in pending_events
+    #                 )
+    #                 log.debug('{}.{:0>6} - {}'.format(e_time, e_millis, event_repr))
+    #                 pending_events = []
+    #             else:
+    #                 pending_events += [event]

remarkable_mouse/pynput.py

@@ -3,7 +3,7 @@ import struct
 from screeninfo import get_monitors
 
 logging.basicConfig(format='%(message)s')
-log = logging.getLogger(__name__)
+log = logging.getLogger('remouse')
 
 # evtype_sync = 0
 # evtype_key = 1
@@ -57,8 +57,17 @@ def remap(x, y, wacom_width, wacom_height, monitor_width,
     )
 
 
-def read_tablet(args, remote_device):
+def read_tablet(rm_inputs, *, orientation, monitor, threshold, mode):
-    """Loop forever and map evdev events to mouse"""
+    """Loop forever and map evdev events to mouse
+
+    Args:
+        rm_inputs (dictionary of paramiko.ChannelFile): dict of pen, button
+            and touch input streams
+        orientation (str): tablet orientation
+        monitor (int): monitor number to map to
+        threshold (int): pressure threshold
+        mode (str): mapping mode
+    """
 
     from pynput.mouse import Button, Controller
 
@@ -67,11 +76,11 @@ def read_tablet(args, remote_device):
 
     mouse = Controller()
 
-    monitor = get_monitors()[args.monitor]
+    monitor = get_monitors()[monitor]
     log.debug('Chose monitor: {}'.format(monitor))
 
     while True:
-        _, _, e_type, e_code, e_value = struct.unpack('2IHHi', remote_device.read(16))
+        _, _, e_type, e_code, e_value = struct.unpack('2IHHi', rm_inputs['pen'].read(16))
 
         if e_type == e_type_abs:
 
@@ -90,7 +99,7 @@ def read_tablet(args, remote_device):
             # handle draw
             if e_code == e_code_stylus_pressure:
                 log.debug('\t\t{}'.format(e_value))
-                if e_value > args.threshold:
+                if e_value > threshold:
                     if lifted:
                         log.debug('PRESS')
                         lifted = False
@@ -108,7 +117,7 @@ def read_tablet(args, remote_device):
                     x, y,
                     wacom_width, wacom_height,
                     monitor.width, monitor.height,
-                    args.mode, args.orientation
+                    mode, orientation
                 )
                 mouse.move(
                     monitor.x + mapped_x - mouse.position[0],

remarkable_mouse/remarkable_mouse.py

@@ -7,25 +7,31 @@ import os
 import sys
 import struct
 from getpass import getpass
+from itertools import cycle
 
 import paramiko
 import paramiko.agent
 
 logging.basicConfig(format='%(message)s')
-log = logging.getLogger(__name__)
+log = logging.getLogger('remouse')
 
+default_key = os.path.expanduser('~/.ssh/remarkable')
 
-def open_remote_device(args, file='/dev/input/event0'):
+
+def open_rm_inputs(*, address, key, password):
     """
     Open a remote input device via SSH.
 
     Args:
-        args: argparse arguments
+        address (str): address to reMarkable
-        file (str): path to the input device on the device
+        key (str, optional): path to reMarkable ssh key
+        password (str, optional): reMarkable ssh password
     Returns:
-        (paramiko.ChannelFile): read-only stream of input events
+        (paramiko.ChannelFile): read-only stream of pen events
+        (paramiko.ChannelFile): read-only stream of touch events
+        (paramiko.ChannelFile): read-only stream of button events
     """
-    log.info("Connecting to input '{}' on '{}'".format(file, args.address))
+    log.debug("Connecting to input '{}'".format(address))
 
     client = paramiko.SSHClient()
     client.set_missing_host_key_policy(paramiko.AutoAddPolicy())
@@ -35,29 +41,35 @@ def open_remote_device(args, file='/dev/input/event0'):
 
     agent = paramiko.agent.Agent()
 
-    if args.key is not None:
+    def use_key(key):
-        password = None
         try:
-            pkey = paramiko.RSAKey.from_private_key_file(os.path.expanduser(args.key))
+            pkey = paramiko.RSAKey.from_private_key_file(os.path.expanduser(key))
         except paramiko.ssh_exception.PasswordRequiredException:
             passphrase = getpass(
-                "Enter passphrase for key '{}': ".format(os.path.expanduser(args.key))
+                "Enter passphrase for key '{}': ".format(os.path.expanduser(key))
             )
             pkey = paramiko.RSAKey.from_private_key_file(
-                os.path.expanduser(args.key),
+                os.path.expanduser(key),
                 password=passphrase
             )
-    elif args.password:
+        return pkey
-        password = args.password
+
+    if key is not None:
+        password = None
+        pkey = use_key(key)
+    elif os.path.exists(default_key):
+        password = None
+        pkey = use_key(default_key)
+    elif password:
         pkey = None
     elif not agent.get_keys():
         password = getpass(
-            "Password for '{}': ".format(args.address)
+            "Password for '{}': ".format(address)
         )
         pkey = None
 
     client.connect(
-        args.address,
+        address,
         username='root',
         password=password,
         pkey=pkey,
@@ -68,12 +80,33 @@ def open_remote_device(args, file='/dev/input/event0'):
 
     paramiko.agent.AgentRequestHandler(session)
 
-    # Start reading events
+    pen_file = client.exec_command(
-    _, stdout, _ = client.exec_command('cat ' + file)
+        'readlink -f /dev/input/touchscreen0'
+    )[1].read().decode('utf8').rstrip('\n')
 
-    print("connected to", args.address)
+    # handle both reMarkable versions
+    # https://github.com/Eeems/oxide/issues/48#issuecomment-690830572
+    if pen_file == '/dev/input/event0':
+        # rM 1
+        touch_file = '/dev/input/event1'
+        button_file = '/dev/input/event2'
+    else:
+        # rM 2
+        touch_file = '/dev/input/event2'
+        button_file = '/dev/input/event0'
 
-    return stdout
+    log.debug('Pen:{}\nTouch:{}\nButton:{}'.format(pen_file, touch_file, button_file))
+
+    # Start reading events
+    pen = client.exec_command('cat ' + pen_file)[1]
+    touch = client.exec_command('cat ' + touch_file)[1]
+    button = client.exec_command('cat ' + button_file)[1]
+    # Skip to next input if no data available
+    # pen.channel.setblocking(0)
+    # touch.channel.setblocking(0)
+    # button.channel.setblocking(0)
+
+    return {'pen': pen, 'touch': touch, 'button': button}
 
 
 def main():
@@ -84,39 +117,90 @@ def main():
         parser.add_argument('--password', default=None, type=str, help="ssh password")
         parser.add_argument('--address', default='10.11.99.1', type=str, help="device address")
         parser.add_argument('--mode', default='fill', choices=['fit', 'fill'], help="scale setting")
-        parser.add_argument('--orientation', default='right', choices=['top', 'left', 'right', 'bottom'], help="position of tablet buttons")
+        parser.add_argument('--orientation', default='right', choices=['top', 'left', 'right', 'bottom'], help="position of charging port")
         parser.add_argument('--monitor', default=0, type=int, metavar='NUM', help="monitor to output to")
         parser.add_argument('--threshold', metavar='THRESH', default=600, type=int, help="stylus pressure threshold (default 600)")
         parser.add_argument('--evdev', action='store_true', default=False, help="use evdev to support pen pressure (requires root, Linux only)")
 
         args = parser.parse_args()
 
-        remote_device = open_remote_device(args)
-
         if args.debug:
-            logging.getLogger('').setLevel(logging.DEBUG)
             log.setLevel(logging.DEBUG)
-            log.info('Debugging enabled...')
+            print('Debugging enabled...')
         else:
             log.setLevel(logging.INFO)
 
-        if args.evdev:
+        # ----- Connect to device -----
-            from remarkable_mouse.evdev import create_local_device, pipe_device
 
-            try:
+        rm_inputs = open_rm_inputs(
-                local_device = create_local_device()
+            address=args.address,
-                log.info("Created virtual input device '{}'".format(local_device.devnode))
+            key=args.key,
-            except PermissionError:
+            password=args.password,
-                log.error('Insufficient permissions for creating a virtual input device')
+        )
-                log.error('Make sure you run this program as root')
+        print("Connected to", args.address)
-                sys.exit(1)
+
+        # ----- Setup event handlers -----
 
-            pipe_device(args, remote_device, local_device)
+        if args.evdev:
+            # from remarkable_mouse.evdev import create_local_device, configure_xinput, read_tablet
+
+            # try:
+            #     local_device = create_local_device()
+            #     log.info("Created virtual input device '{}'".format(local_device.devnode))
+            # except PermissionError:
+            #     log.error('Insufficient permissions for creating a virtual input device')
+            #     log.error('Make sure you run this program as root')
+            #     sys.exit(1)
+
+            # configure_xinput(
+            #     orientation=args.orientation,
+            #     monitor=args.monitor,
+            #     threshold=args.threshold,
+            #     mode=args.mode,
+            # )
+            # read_tablet(rm_inputs, local_device)
+            #
+            # from remarkable_mouse.evdev import create_handler
+            from remarkable_mouse.evdev import read_tablet
 
         else:
             from remarkable_mouse.pynput import read_tablet
-            read_tablet(args, remote_device)
 
+        read_tablet(
+            rm_inputs,
+            orientation=args.orientation,
+            monitor=args.monitor,
+            threshold=args.threshold,
+            mode=args.mode,
+        )
+            # from remarkable_mouse.pynput import create_handler
+
+        # event_handler = create_handler(
+        #     orientation=args.orientation,
+        #     monitor=args.monitor,
+        #     threshold=args.threshold,
+        #     mode=args.mode,
+        # )
+
+        # ----- Handle events -----
+
+        # loop inputs forever
+        # import socket
+        # for name, stream in cycle(rm_inputs.items()):
+        #     try:
+        #         data = stream.read(16)
+        #     except socket.timeout:
+        #         continue
+
+        #     e_time, e_millis, e_type, e_code, e_value = struct.unpack('2IHHi', data)
+
+        #     event_handler(e_time, e_millis, e_type, e_code, e_value)
+
+
+    except PermissionError:
+        log.error('Insufficient permissions for creating a virtual input device')
+        log.error('Make sure you run this program as root')
+        sys.exit(1)
     except KeyboardInterrupt:
         pass
     except EOFError: