You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.

553 lines
21 KiB

#!/usr/bin/env zsh
##############################################################################
#
# Copyright (c) 2009 Peter Stephenson
# Copyright (c) 2011 Guido van Steen
# Copyright (c) 2011 Suraj N. Kurapati
# Copyright (c) 2011 Sorin Ionescu
# Copyright (c) 2011 Vincent Guerci
# All rights reserved.
#
# Redistribution and use in source and binary forms, with or without
# modification, are permitted provided that the following conditions are met:
#
# * Redistributions of source code must retain the above copyright
# notice, this list of conditions and the following disclaimer.
#
# * Redistributions in binary form must reproduce the above
# copyright notice, this list of conditions and the following
# disclaimer in the documentation and/or other materials provided
# with the distribution.
#
# * Neither the name of the FIZSH nor the names of its contributors
# may be used to endorse or promote products derived from this
# software without specific prior written permission.
#
# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
# AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
# IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
# ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE
# LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
# CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
# SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
# INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
# CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
# ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
# POSSIBILITY OF SUCH DAMAGE.
#
##############################################################################
#-----------------------------------------------------------------------------
# configuration variables
#-----------------------------------------------------------------------------
HISTORY_SUBSTRING_SEARCH_HIGHLIGHT_FOUND='bg=magenta,fg=white,bold'
HISTORY_SUBSTRING_SEARCH_HIGHLIGHT_NOT_FOUND='bg=red,fg=white,bold'
HISTORY_SUBSTRING_SEARCH_GLOBBING_FLAGS='i'
#-----------------------------------------------------------------------------
# the main ZLE widgets
#-----------------------------------------------------------------------------
function history-substring-search-up() {
_history-substring-search-begin
_history-substring-search-up-history ||
_history-substring-search-up-buffer ||
_history-substring-search-up-search
_history-substring-search-end
}
function history-substring-search-down() {
_history-substring-search-begin
_history-substring-search-down-history ||
_history-substring-search-down-buffer ||
_history-substring-search-down-search
_history-substring-search-end
}
zle -N history-substring-search-up
zle -N history-substring-search-down
bindkey '\e[A' history-substring-search-up
bindkey '\e[B' history-substring-search-down
#-----------------------------------------------------------------------------
# implementation details
#-----------------------------------------------------------------------------
zmodload -F zsh/parameter
#
# We have to "override" some keys and widgets if the
# zsh-syntax-highlighting plugin has not been loaded:
#
# https://github.com/nicoulaj/zsh-syntax-highlighting
#
if [[ $+functions[_zsh_highlight] -eq 0 ]]; then
#
# Dummy implementation of _zsh_highlight()
# that simply removes existing highlights
#
function _zsh_highlight() {
region_highlight=()
}
#
# Remove existing highlights when the user
# inserts printable characters into $BUFFER
#
function ordinary-key-press() {
if [[ $KEYS == [[:print:]] ]]; then
region_highlight=()
fi
zle .self-insert
}
zle -N self-insert ordinary-key-press
#
# The following snippet was taken from the zsh-syntax-highlighting project:
#
# https://github.com/zsh-users/zsh-syntax-highlighting/blob/56b134f5d62ae3d4e66c7f52bd0cc2595f9b305b/zsh-syntax-highlighting.zsh#L126-161
#
# Copyright (c) 2010-2011 zsh-syntax-highlighting contributors
# All rights reserved.
#
# Redistribution and use in source and binary forms, with or without
# modification, are permitted provided that the following conditions are
# met:
#
# * Redistributions of source code must retain the above copyright
# notice, this list of conditions and the following disclaimer.
#
# * Redistributions in binary form must reproduce the above copyright
# notice, this list of conditions and the following disclaimer in the
# documentation and/or other materials provided with the distribution.
#
# * Neither the name of the zsh-syntax-highlighting contributors nor the
# names of its contributors may be used to endorse or promote products
# derived from this software without specific prior written permission.
#
# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS
# IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO,
# THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
# PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR
# CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
# EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
# PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
# PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
# LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
# NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
# SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
#
#--------------8<-------------------8<-------------------8<-----------------
# Rebind all ZLE widgets to make them invoke _zsh_highlights.
_zsh_highlight_bind_widgets()
{
# Load Zsh module zsh/zleparameter, needed to override user defined widgets.
zmodload zsh/zleparameter 2>/dev/null || {
print 'zsh-syntax-highlighting: failed loading zsh/zleparameter.' >&2
return 1
}
# Override ZLE widgets to make them invoke _zsh_highlight.
local cur_widget
for cur_widget in ${${(f)"$(builtin zle -la)"}:#(.*|_*|orig-*|run-help|which-command|beep)}; do
case $widgets[$cur_widget] in
# Already rebound event: do nothing.
user:$cur_widget|user:_zsh_highlight_widget_*);;
# User defined widget: override and rebind old one with prefix "orig-".
user:*) eval "zle -N orig-$cur_widget ${widgets[$cur_widget]#*:}; \
_zsh_highlight_widget_$cur_widget() { builtin zle orig-$cur_widget -- \"\$@\" && _zsh_highlight }; \
zle -N $cur_widget _zsh_highlight_widget_$cur_widget";;
# Completion widget: override and rebind old one with prefix "orig-".
completion:*) eval "zle -C orig-$cur_widget ${${widgets[$cur_widget]#*:}/:/ }; \
_zsh_highlight_widget_$cur_widget() { builtin zle orig-$cur_widget -- \"\$@\" && _zsh_highlight }; \
zle -N $cur_widget _zsh_highlight_widget_$cur_widget";;
# Builtin widget: override and make it call the builtin ".widget".
builtin) eval "_zsh_highlight_widget_$cur_widget() { builtin zle .$cur_widget -- \"\$@\" && _zsh_highlight }; \
zle -N $cur_widget _zsh_highlight_widget_$cur_widget";;
# Default: unhandled case.
*) print "zsh-syntax-highlighting: unhandled ZLE widget '$cur_widget'" >&2 ;;
esac
done
}
#-------------->8------------------->8------------------->8-----------------
_zsh_highlight_bind_widgets
fi
function _history-substring-search-begin() {
setopt LOCAL_OPTIONS EXTENDED_GLOB
_history_substring_search_move_cursor_eol=false
_history_substring_search_query_highlight=
#
# Continue using the previous $_history_substring_search_result by default,
# unless the current query was cleared or a new/different query was entered.
#
if [[ -z $BUFFER || $BUFFER != $_history_substring_search_result ]]; then
#
# For the purpose of highlighting we will also keep
# a version without doubly-escaped meta characters.
#
_history_substring_search_query=$BUFFER
#
# $BUFFER contains the text that is in the command-line currently.
# we put an extra "\\" before meta characters such as "\(" and "\)",
# so that they become "\\\(" and "\\\)".
#
_history_substring_search_query_escaped=${BUFFER//(#m)[\][()|\\*?#<>~^]/\\$MATCH}
#
# Find all occurrences of the search query in the history file.
#
# (k) turns it an array of line numbers.
#
# (on) seems to remove duplicates, which are default
# options. They can be turned off by (ON).
#
_history_substring_search_matches=(${(kon)history[(R)(#$HISTORY_SUBSTRING_SEARCH_GLOBBING_FLAGS)*${_history_substring_search_query_escaped}*]})
#
# Define the range of values that $_history_substring_search_match_index
# can take: [0, $_history_substring_search_matches_count_plus].
#
_history_substring_search_matches_count=$#_history_substring_search_matches
_history_substring_search_matches_count_plus=$(( _history_substring_search_matches_count + 1 ))
_history_substring_search_matches_count_sans=$(( _history_substring_search_matches_count - 1 ))
#
# If $_history_substring_search_match_index is equal to
# $_history_substring_search_matches_count_plus, this indicates that we
# are beyond the beginning of $_history_substring_search_matches.
#
# If $_history_substring_search_match_index is equal to 0, this indicates
# that we are beyond the end of $_history_substring_search_matches.
#
# If we have initially pressed "up" we have to initialize
# $_history_substring_search_match_index to
# $_history_substring_search_matches_count_plus so that it will be
# decreased to $_history_substring_search_matches_count.
#
# If we have initially pressed "down" we have to initialize
# $_history_substring_search_match_index to
# $_history_substring_search_matches_count so that it will be increased to
# $_history_substring_search_matches_count_plus.
#
if [[ $WIDGET == history-substring-search-down ]]; then
_history_substring_search_match_index=$_history_substring_search_matches_count
else
_history_substring_search_match_index=$_history_substring_search_matches_count_plus
fi
fi
}
function _history-substring-search-end() {
setopt LOCAL_OPTIONS EXTENDED_GLOB
_history_substring_search_result=$BUFFER
# move the cursor to the end of the command line
if [[ $_history_substring_search_move_cursor_eol == true ]]; then
CURSOR=${#BUFFER}
fi
# highlight command line using zsh-syntax-highlighting
_zsh_highlight
# highlight the search query inside the command line
if [[ -n $_history_substring_search_query_highlight && -n $_history_substring_search_query ]]; then
#
# The following expression yields a variable $MBEGIN, which
# indicates the begin position + 1 of the first occurrence
# of _history_substring_search_query_escaped in $BUFFER.
#
: ${(S)BUFFER##(#m$HISTORY_SUBSTRING_SEARCH_GLOBBING_FLAGS)($_history_substring_search_query##)}
local begin=$(( MBEGIN - 1 ))
local end=$(( begin + $#_history_substring_search_query ))
region_highlight+=("$begin $end $_history_substring_search_query_highlight")
fi
# For debugging purposes:
# zle -R "mn: "$_history_substring_search_match_index" m#: "${#_history_substring_search_matches}
# read -k -t 200 && zle -U $REPLY
# Exit successfully from the history-substring-search-* widgets.
true
}
function _history-substring-search-up-buffer() {
#
# Check if the UP arrow was pressed to move the cursor within a multi-line
# buffer. This amounts to three tests:
#
# 1. $#buflines -gt 1.
#
# 2. $CURSOR -ne $#BUFFER.
#
# 3. Check if we are on the first line of the current multi-line buffer.
# If so, pressing UP would amount to leaving the multi-line buffer.
#
# We check this by adding an extra "x" to $LBUFFER, which makes
# sure that xlbuflines is always equal to the number of lines
# until $CURSOR (including the line with the cursor on it).
#
local buflines XLBUFFER xlbuflines
buflines=(${(f)BUFFER})
XLBUFFER=$LBUFFER"x"
xlbuflines=(${(f)XLBUFFER})
if [[ $#buflines -gt 1 && $CURSOR -ne $#BUFFER && $#xlbuflines -ne 1 ]]; then
zle up-line-or-history
return true
fi
false
}
function _history-substring-search-down-buffer() {
#
# Check if the DOWN arrow was pressed to move the cursor within a multi-line
# buffer. This amounts to three tests:
#
# 1. $#buflines -gt 1.
#
# 2. $CURSOR -ne $#BUFFER.
#
# 3. Check if we are on the last line of the current multi-line buffer.
# If so, pressing DOWN would amount to leaving the multi-line buffer.
#
# We check this by adding an extra "x" to $RBUFFER, which makes
# sure that xrbuflines is always equal to the number of lines
# from $CURSOR (including the line with the cursor on it).
#
local buflines XRBUFFER xrbuflines
buflines=(${(f)BUFFER})
XRBUFFER="x"$RBUFFER
xrbuflines=(${(f)XRBUFFER})
if [[ $#buflines -gt 1 && $CURSOR -ne $#BUFFER && $#xrbuflines -ne 1 ]]; then
zle down-line-or-history
return true
fi
false
}
function _history-substring-search-up-history() {
#
# Behave like up in Zsh, except clear the $BUFFER
# when beginning of history is reached like in Fish.
#
if [[ -z $_history_substring_search_query ]]; then
# we have reached the absolute top of history
if [[ $HISTNO -eq 1 ]]; then
BUFFER=
# going up from somewhere below the top of history
else
zle up-line-or-history
fi
return true
fi
false
}
function _history-substring-search-down-history() {
#
# Behave like down-history in Zsh, except clear the
# $BUFFER when end of history is reached like in Fish.
#
if [[ -z $_history_substring_search_query ]]; then
# going down from the absolute top of history
if [[ $HISTNO -eq 1 && -z $BUFFER ]]; then
BUFFER=${history[1]}
_history_substring_search_move_cursor_eol=true
# going down from somewhere above the bottom of history
else
zle down-line-or-history
fi
return true
fi
false
}
function _history-substring-search-up-search() {
_history_substring_search_move_cursor_eol=true
#
# Highlight matches during history-substring-up-search:
#
# The following constants have been initialized in
# _history-substring-search-up/down-search():
#
# $_history_substring_search_matches is the current list of matches
# $_history_substring_search_matches_count is the current number of matches
# $_history_substring_search_matches_count_plus is the current number of matches + 1
# $_history_substring_search_matches_count_sans is the current number of matches - 1
# $_history_substring_search_match_index is the index of the current match
#
# The range of values that $_history_substring_search_match_index can take
# is: [0, $_history_substring_search_matches_count_plus]. A value of 0
# indicates that we are beyond the end of
# $_history_substring_search_matches. A value of
# $_history_substring_search_matches_count_plus indicates that we are beyond
# the beginning of $_history_substring_search_matches.
#
# In _history-substring-search-up-search() the initial value of
# $_history_substring_search_match_index is
# $_history_substring_search_matches_count_plus. This value is set in
# _history-substring-search-begin(). _history-substring-search-up-search()
# will initially decrease it to $_history_substring_search_matches_count.
#
if [[ $_history_substring_search_match_index -ge 2 ]]; then
#
# Highlight the next match:
#
# 1. Decrease the value of $_history_substring_search_match_index.
#
# 2. Use $HISTORY_SUBSTRING_SEARCH_HIGHLIGHT_FOUND
# to highlight the current buffer.
#
(( _history_substring_search_match_index-- ))
BUFFER=$history[$_history_substring_search_matches[$_history_substring_search_match_index]]
_history_substring_search_query_highlight=$HISTORY_SUBSTRING_SEARCH_HIGHLIGHT_FOUND
elif [[ $_history_substring_search_match_index -eq 1 ]]; then
#
# We will move beyond the end of $_history_substring_search_matches:
#
# 1. Decrease the value of $_history_substring_search_match_index.
#
# 2. Save the current buffer in $_history_substring_search_old_buffer,
# so that it can be retrieved by
# _history-substring-search-down-search() later.
#
# 3. Make $BUFFER equal to $_history_substring_search_query.
#
# 4. Use $HISTORY_SUBSTRING_SEARCH_HIGHLIGHT_NOT_FOUND
# to highlight the current buffer.
#
(( _history_substring_search_match_index-- ))
_history_substring_search_old_buffer=$BUFFER
BUFFER=$_history_substring_search_query
_history_substring_search_query_highlight=$HISTORY_SUBSTRING_SEARCH_HIGHLIGHT_NOT_FOUND
elif [[ $_history_substring_search_match_index -eq $_history_substring_search_matches_count_plus ]]; then
#
# We were beyond the beginning of $_history_substring_search_matches but
# UP makes us move back to $_history_substring_search_matches:
#
# 1. Decrease the value of $_history_substring_search_match_index.
#
# 2. Restore $BUFFER from $_history_substring_search_old_buffer.
#
# 3. Use $HISTORY_SUBSTRING_SEARCH_HIGHLIGHT_FOUND
# to highlight the current buffer.
#
(( _history_substring_search_match_index-- ))
BUFFER=$_history_substring_search_old_buffer
_history_substring_search_query_highlight=$HISTORY_SUBSTRING_SEARCH_HIGHLIGHT_FOUND
fi
}
function _history-substring-search-down-search() {
_history_substring_search_move_cursor_eol=true
#
# Highlight matches during history-substring-up-search:
#
# The following constants have been initialized in
# _history-substring-search-up/down-search():
#
# $_history_substring_search_matches is the current list of matches
# $_history_substring_search_matches_count is the current number of matches
# $_history_substring_search_matches_count_plus is the current number of matches + 1
# $_history_substring_search_matches_count_sans is the current number of matches - 1
# $_history_substring_search_match_index is the index of the current match
#
# The range of values that $_history_substring_search_match_index can take
# is: [0, $_history_substring_search_matches_count_plus]. A value of 0
# indicates that we are beyond the end of
# $_history_substring_search_matches. A value of
# $_history_substring_search_matches_count_plus indicates that we are beyond
# the beginning of $_history_substring_search_matches.
#
# In _history-substring-search-down-search() the initial value of
# $_history_substring_search_match_index is
# $_history_substring_search_matches_count. This value is set in
# _history-substring-search-begin().
# _history-substring-search-down-search() will initially increase it to
# $_history_substring_search_matches_count_plus.
#
if [[ $_history_substring_search_match_index -le $_history_substring_search_matches_count_sans ]]; then
#
# Highlight the next match:
#
# 1. Increase $_history_substring_search_match_index by 1.
#
# 2. Use $HISTORY_SUBSTRING_SEARCH_HIGHLIGHT_FOUND
# to highlight the current buffer.
#
(( _history_substring_search_match_index++ ))
BUFFER=$history[$_history_substring_search_matches[$_history_substring_search_match_index]]
_history_substring_search_query_highlight=$HISTORY_SUBSTRING_SEARCH_HIGHLIGHT_FOUND
elif [[ $_history_substring_search_match_index -eq $_history_substring_search_matches_count ]]; then
#
# We will move beyond the beginning of $_history_substring_search_matches:
#
# 1. Increase $_history_substring_search_match_index by 1.
#
# 2. Save the current buffer in $_history_substring_search_old_buffer, so
# that it can be retrieved by _history-substring-search-up-search()
# later.
#
# 3. Make $BUFFER equal to $_history_substring_search_query.
#
# 4. Use $HISTORY_SUBSTRING_SEARCH_HIGHLIGHT_NOT_FOUND
# to highlight the current buffer.
#
(( _history_substring_search_match_index++ ))
_history_substring_search_old_buffer=$BUFFER
BUFFER=$_history_substring_search_query
_history_substring_search_query_highlight=$HISTORY_SUBSTRING_SEARCH_HIGHLIGHT_NOT_FOUND
elif [[ $_history_substring_search_match_index -eq 0 ]]; then
#
# We were beyond the end of $_history_substring_search_matches but DOWN
# makes us move back to the $_history_substring_search_matches:
#
# 1. Increase $_history_substring_search_match_index by 1.
#
# 2. Restore $BUFFER from $_history_substring_search_old_buffer.
#
# 3. Use $HISTORY_SUBSTRING_SEARCH_HIGHLIGHT_FOUND
# to highlight the current buffer.
#
(( _history_substring_search_match_index++ ))
BUFFER=$_history_substring_search_old_buffer
_history_substring_search_query_highlight=$HISTORY_SUBSTRING_SEARCH_HIGHLIGHT_FOUND
fi
}
# -*- mode: zsh; sh-indentation: 2; indent-tabs-mode: nil; sh-basic-offset: 2; -*-
# vim: ft=zsh sw=2 ts=2 et