Fix examples after thorough testing

ctru-rs/examples/camera-image.rs

@@ -61,7 +61,7 @@ fn main() {
     let mut buf = vec![0u8; BUF_SIZE];
 
     println!("\nPress R to take a new picture");
-    println!("\x1b[29;16HPress Start to exit");
+    println!("Press Start to exit");
 
     while apt.main_loop() {
         hid.scan_input();

ctru-rs/examples/gfx-3d-mode.rs

@@ -10,7 +10,6 @@ use ctru::services::gfx::{Flush, Screen, Side, Swap, TopScreen3D};
 //
 // WARNING: this example uses 3D mode in a rather unnatural way, and should
 // probably not be viewed for too long or at all if you are photosensitive.
-
 const IMAGE: &[u8] = include_bytes!("assets/ferris.rgb");
 static ZERO: &[u8] = &[0; IMAGE.len()];
 
@@ -22,8 +21,9 @@ fn main() {
     let apt = Apt::new().expect("Couldn't obtain APT controller");
     let _console = Console::new(gfx.bottom_screen.borrow_mut());
 
-    println!("Press A to switch sides (be sure to have set the 3D slider correctly).");
+    println!("Press A to switch sides.");
-    println!("\x1b[29;16HPress Start to exit");
+    println!("Make sure to have set the 3D slider correctly");
+    println!("\x1b[29;12HPress Start to exit");
 
     gfx.top_screen.borrow_mut().set_double_buffering(true);
 

ctru-rs/examples/gfx-bitmap.rs

@@ -64,6 +64,15 @@ fn main() {
             } else {
                 IMAGE
             };
+
+            let frame_buffer = bottom_screen.raw_framebuffer();
+
+            // We render the newly switched image to the framebuffer.
+            unsafe {
+                frame_buffer
+                    .ptr
+                    .copy_from(image_bytes.as_ptr(), image_bytes.len());
+            }
         }
 
         // Flush framebuffers. Since we're not using double buffering,

ctru-rs/examples/network-sockets.rs

@@ -12,12 +12,9 @@ fn main() {
     ctru::use_panic_handler();
 
     let gfx = Gfx::new().unwrap();
-    let _console = Console::new(gfx.top_screen.borrow_mut());
     let mut hid = Hid::new().unwrap();
     let apt = Apt::new().unwrap();
 
-    println!("\nlibctru sockets demo\n");
-
     // Owning a living handle to the `Soc` service is required to use network functionalities.
     let soc = Soc::new().unwrap();
 
@@ -25,8 +22,12 @@ fn main() {
     let server = TcpListener::bind("0.0.0.0:80").unwrap();
     server.set_nonblocking(true).unwrap();
 
-    println!("Point your browser to http://{}/\n", soc.host_address());
+    let _bottom_console = Console::new(gfx.bottom_screen.borrow_mut());
-    println!("\x1b[29;16HPress Start to exit");
+
+    println!("Point your browser at:\nhttp://{}/\n", soc.host_address());
+    println!("\x1b[29;12HPress Start to exit");
+
+    let _top_console = Console::new(gfx.top_screen.borrow_mut());
 
     while apt.main_loop() {
         hid.scan_input();
@@ -34,6 +35,7 @@ fn main() {
             break;
         };
 
+        // Receive any incoming connections.
         match server.accept() {
             Ok((mut stream, socket_addr)) => {
                 println!("Got connection from {socket_addr}");

ctru-rs/examples/software-keyboard.rs

@@ -13,8 +13,7 @@ fn main() {
     let gfx = Gfx::new().unwrap();
     let _console = Console::new(gfx.top_screen.borrow_mut());
 
-    println!("Press A to enter some text.");
+    println!("Press A to enter some text or press Start to exit.");
-    println!("\x1b[29;16HPress Start to exit");
 
     while apt.main_loop() {
         hid.scan_input();
@@ -23,7 +22,7 @@ fn main() {
             break;
         }
 
-        // If the user request to write some input.
+        // Check if the user request to write some input.
         if hid.keys_down().contains(KeyPad::A) {
             // Prepares a software keyboard with two buttons: One to cancel input and one
             // to accept it. You can also use `SoftwareKeyboard::new()` to launch the keyboard in different

ctru-rs/examples/time-rtc.rs

@@ -27,8 +27,17 @@ fn main() {
         // since the 3DS doesn't seem to support timezones.
         let cur_time = time::OffsetDateTime::now_utc();
 
-        // Display the retrieved information.
+        let hours = cur_time.hour();
-        println!("\x1b[1;1H{cur_time}");
+        let minutes = cur_time.minute();
+        let seconds = cur_time.second();
+
+        let weekday = cur_time.weekday().to_string();
+        let month = cur_time.month().to_string();
+        let day = cur_time.day();
+        let year = cur_time.year();
+
+        println!("\x1b[1;1H{hours:0>2}:{minutes:0>2}:{seconds:0>2}");
+        println!("{weekday} {month} {day} {year}");
 
         gfx.wait_for_vblank();
     }

ctru-rs/examples/title-info.rs

@@ -88,7 +88,8 @@ fn main() {
 
             // Clear the bottom screen and write the properties of selected title to it.
             bottom_screen.select();
-            println!("\x1b[2J");
+            bottom_screen.clear();
+            println!("Press Start to exit");
 
             // Move cursor to top left.
             println!("\x1b[1;1");
@@ -97,7 +98,6 @@ fn main() {
             println!("Version: 0x{:x}", selected_title.version());
             println!("Product code: \"{}\"", selected_title.product_code());
 
-            println!("\x1b[29;16HPress Start to exit");
             if use_nand {
                 println!("Press SELECT to choose SD Card");
                 println!("Current medium: NAND");

ctru-rs/examples/touch-screen.rs

@@ -32,6 +32,9 @@ fn main() {
         // We only want to print the position when it's different
         // from what it was on the previous frame.
         if touch != old_touch {
+            // Move the cursor back to the top of the screen and print the coordinates.
+            print!("\x1b[1;1HTouch Screen position: {:#?}", touch);
+            
             // Special case for when the user lifts the stylus/finger from the screen.
             // This is done to avoid some screen tearing.
             if touch == (0, 0) {
@@ -40,9 +43,6 @@ fn main() {
                 // Print again because we just cleared the screen.
                 println!("\x1b[29;16HPress Start to exit");
             }
-
-            // Move the cursor back to the top of the screen and print the coordinates.
-            print!("\x1b[1;1HTouch Screen position: {:#?}", touch);
         }
 
         // Save our current touch position for the next frame.

ctru-rs/src/console.rs

@@ -21,7 +21,9 @@ static mut EMPTY_CONSOLE: PrintConsole = unsafe { const_zero::const_zero!(PrintC
 ///
 /// # Notes
 ///
-/// The console will take full possession of the screen handed to it as long as it stays alive. It also supports ANSI codes.
+/// The [`Console`] will take full possession of the screen handed to it as long as it stays alive. It also supports ANSI codes.
+/// The [`Console`]'s window will have a size of 40x30 on the bottom screen, 50x30 on the normal top screen and
+/// 100x30 on the top screen when wide mode is enabled.
 ///
 /// # Alternatives
 ///